31462 LG Washer - Overview

Diagrams for 31462

See every part. Know exactly what you need.

Parts for the 31462

$138.79

Washer Water Inlet Valve

★★★★★

(77)

Part #AJU75152601

This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.

$161.46

Pulsator Assembly

★★★★★

(23)

Part #AGZ72909711

This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. If the pulsator in your washer is broken, it will need replacing immediately to continue to wash and clean your clothes evenly. The cap that sits in the center of this part is sold separately.

$42.12

Tub-to-Pump Hose

★★★★★

(18)

Part #AEM73213001

This is a drain hose assembly for top-load models of LG washing machines. This hose specifically is used to allow water to drain from the tub to the drain pump of the washer. This hose is made of plastic and comes with two clamps to secure it within your washer, one on each end. If you notice your washer is leaking check to make sure if t...Read more

Read less

$47.40

Washer drain Hose Assembly

★★★★★

(7)

Part #AEM73732901

This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pump, and it is responsible for transporting water out of the washing machine after a cycle. If the drain hose is kinked, damaged, or clogged, ...Read more

Read less

$65.73

Washer Switch Assembly sensor

★★★★★

(5)

Part #6501EA1001R

This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It ensures that the washer uses the appropriate amount of water for each cycle and load type. This genuine OEM assembly includes not only the switch itself but also the accompanying air dome tube.

$268.86

STATOR ASSEMBLY

★★★★★

(3)

Part #4417EA1002Y

$125.62

Motor Assembly Clutch

Part #4681EA1009C

$125.62

Washer Lid Switch Assembly

★★★★★

(1)

Part #EBF61215202

This lid switch assembly is a replacement safety component that detects lid position during operation. It is commonly replaced when the appliance will not start or fails to stop when the lid is opened.

Exact Part matches for your search term

Stainless Steel Cleaner

This part number matches the current model number 31462

Part #31462A

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

$16.38

Bushing, Crankshaft

This part number matches the current model number 31462

Part #31462

SVC CLEANER 10 OZ STAINLESS ST

This part number matches the current model number 31462

Part #DA81-07681A

$181.51

SHELF

This part number matches the current model number 31462

Part #31462

Questions And Answers for 31462

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

William - For model number 31462

May 1, 2024

Where can I find a Detergent/Fabric Softener replacement dispenser drawer for my Kenmore Elite Top-Loading Automatic Clothes Washer model #l31462 s/# 408pnqe4z908

Hello William, thank you for your inquiry. The compatible dispenser drawer for your model is part number PS3613534. If you require assistance to place an order, please contact customer service!

BOX ASSEMBLY,DETERGENT

1 person found this instruction helpful.

Was this helpful?

Common Symptoms of the 31462

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Marks left on clothes

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Water continued leaking into washer after the end of cycle through the water inlet valve.

14 of 19 people found this instruction helpful.

Flora from MIAMI, FL
Very Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)

Did the repair Myself. Saved $ 400.00 in the process.

Was this helpful?

Water overflow in washer basin

11 of 15 people found this instruction helpful.

Ed from LAKE WORTH, FL
Really Easy
30 - 60 mins
Pliers, Screw drivers

I diagnosed by running a full wash. I watched it and when the water should have stopped it kept running. I unplugged the washer from the power and the water kept running. This told me the inlet valve was the issue and not an electronic issue. I stopped the water by closing the water valve manually. Replacing the inlet valve was very easy ... Read more

Read less

Was this helpful?

Washer was slowing filling with water when turned off.

9 of 12 people found this instruction helpful.

Michael from La Honda, CA
Very Easy
30 - 60 mins
Pliers, Screw drivers

The problem was the valve suppling water to the bleach dispenser was not closing completely. This also caused some water leaking towards
the front of the washer. Replacing the entire valve assembly was very
easy. Unplug the washer, turn off the water, remove the 2 screws that attach the control panel, disconnect the water supp ... Read more

Read less

Was this helpful?