We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Denise
December 5, 2017
After a power outage, unable to use clock or timer. Oven and cooktop works fine but clock loses time and timer isn't accurate. Not sure what part need to be replaced.
For model number RB787CH1CC
Hi Denise, Thank you for the question. I suggest replacing the Control Board, Part Number: PS3486630. Good luck with the repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Merle
August 8, 2019
Attempting to use oven i get an error code of f3. If the connections between sensor and control panel is good, which do i replace, the sensor or the oven control board?
For model number R B757BH1WH
Hello Merle, thank you for your question. If the connections between the Temperature Sensor and the Oven Electronic Control are ok, you will want to replace this Oven Electronic Control, part number PS3486630 for your model. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Russell
October 20, 2021
I was taking out the oven lightbulb housing and it touched the side of the range and there was an immediate electrical arc and the breaker tripped. When I turn the breaker back on the control panel is totally blank however the burners work. Would you think if I just replace the entire control panel unit that will work?
For model number RB787BH1BB. hotpoint range
Hello Russell, thank you for your question. We recommend turning the breaker off again for 1-3 minutes and turning it back on. This should reset the range. If it does not we suggest replacing the control board. Part number PS3486630. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
May 26, 2022
Does the control panel overlay come with this? I don't see that in the pictures, but the current overlay is permanently glued to the old panel.
For model number RB757WH5WW
Hello David, Thank you for the question. The Overlay, PartSelect Number PS953692 is Peel and Stick and sold separate from the Oven Electronic Control. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Will this oven control work on my Hotpoint gas stove?
For model number RGB747GER3AD
Hello Doug, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS238431. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Was this helpful?
Thank you for voting!
Anwar
February 14, 2023
control panel blinks and does not responde to any command
For model number jctp17 ww2ww ge profile wall oven
Hello Anwar, thank you for the question. We would recommend testing the control panel for continuity with a multimeter. If there is no continuity, we would recommend replacing it, the part number is PS238527. We hope this sorts out your problem!
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
after lightning cooktop worked oven did not
called service co. and described problem while i was looking at parts diagram and he agreed with my feeling what part got fried. he told me the part would be 183.00 plus labor and drive time. when i told him i was looking at the part on line for 65 dollars he hung up on me. i recieved the part and was slightly dissapointed to know there was a sepperate adhesive overlay. i saw that it was a sepperate part but if i knew it was adhesive i would have spent the extra 20 dollars for a new one. but, to my surprise the old one peeled off easily and gently re-apllied it to the new conrol board alighning it well seemed to be the trickiest part of the job. took the five wires with connectors out of the old one and inserted them into the same place on the new one. removed the old one from the frame (4 pan phillp sheet metal screws) and then screwed the new wired control board in. plugged in the unit and pressed the bake button and then mixed the brownie batter. replaced the back panel cover. 65 dollars and 15 minutes.
thanks
bob
robert from OXFORD, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
45 of 55 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electronic Control button broken
Turned off circuit breaker then unplugged range. Used nut driver to remove cover covering the control. Compared wire connections on new control vs old. Unplugged wires. Used a screwdriver to remove screws attaching controls to range. Note: these screws can drop into a spot that can make them hard to locate. Installed new overlay onto the new control and reinstalled. Plugged wires onto new control. Reinstalled rear cover over control. Plugged in power cord and turned on circuit breaker. Checked all functions. Note: order a new overlay with new control as it is adhesive backed and would be hard to remove the old one.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Darryl K - September 25, 2022
Verified Purchase
+ push pad not working.
After find the model number I ordered the part. It arrived quickly and only took about 30 minutes to install even though it was a bit different than the original. Everything went smoothly, including the sticky label using a hair dryer and stuck right on the new part. Alls well and I didn’t need to spend $700 or a $1000 for a new stove. I had to crawl around on hands and knees until I found the model number. Take the time to do this. Don’t try identify the stove by the picture.
★★★★★
★★★★★
Michael W - December 3, 2021
Verified Purchase
Easy repair and very little time needed
Easy repair and very little time needed
★★★★★
★★★★★
John B - June 7, 2018
Verified Purchase
worked aas ex[ected
part was not damaged in transit ==works well
★★★★★
★★★★★
Gene S - March 13, 2018
Verified Purchase
received part a little different .
it went in with no trouble. some things were different, but not hard to figure out. spent more time cleaning behind stove. then putting part in.I would say all in all a great purchase.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
