EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

137481 General Electric Range - Overview

Diagrams for 137481

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB30X46987
$100.47
In Stock
Bake Element
★★★★★
★★★★★
(105)
Part #WB30X46987
The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.
Light Bulb - 40W – Part Number: 40A15
$21.95
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(10)
Part #40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
Oven Rack – Part Number: WB48T10095
$73.86
In Stock
Oven Rack
★★★★★
★★★★★
(17)
Part #WB48T10095
The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for easy access. Racks can become rough and discolored over time and may need to be replaced, or perhaps you just need extra storage space in the oven! This repair is extremely simple and does not require any tools. Before you begin, ensure that the rack edges are straight and have not warped from shipment. Once the oven door is open, the stop end goes in first and it simply slides into place.
CONTROL OVEN TO9 – Part Number: WB27X45466
$152.46
In Stock
CONTROL OVEN TO9
★★★★★
★★★★★
(67)
Part #WB27X45466
This electronic control board is the central component of your wall oven, managing functions such as temperature regulation and heating elements. The manufacturer has modified the wiring on this part, so professional installation may be necessary for proper setup. Before installation, shut off the circuit breaker or unplug the oven for safety. This genuine OEM part ensures optimal oven performance and compatibility with select models.
Range Surface Element Control Switch - 6 Inch - 1560 W – Part Number: WB24T10029
$52.95
In Stock
Range Surface Element Control Switch - 6 Inch - 1560 W
★★★★★
★★★★★
(19)
Part #WB24T10029
This surface element control switch, also known as an infinite switch, regulates the power supplied to a 6-inch, 1560-watt heating element on electric ranges. It allows for precise adjustment of heat levels by cycling the element on and off, rather than relying on fixed temperature settings. Operating at 240 volts and drawing between 4.4 to 7.4 amps, the switch ensures consistent and responsive heat control. Replacing a faulty switch can resolve issues such as the element not heating, staying stuck on high, or fluctuating in temperature. This component is essential for maintaining safe and efficient cooking performance.
Drawer Support – Part Number: WB02K10158
$16.40
In Stock
Drawer Support
★★★★★
★★★★★
(6)
Part #WB02K10158
This is a replacement drawer support for your oven. The drawer support provides stability to the drawer unit as it opens and closes. If your oven drawer is hanging or will not slide in or out efficiently, you could have a damaged or missing drawer support. This part is made of white plastic and is sold individually. To replace the support, simply remove the oven drawer, and unscrew the front support on the sides of the oven. Then, simply screw the new part in and replace the drawer to complete your repair.
BROIL ELEMENT – Part Number: WB30X46986
$87.78
In Stock
BROIL ELEMENT
★★★★★
★★★★★
(13)
Part #WB30X46986
This broil element is designed for wall ovens and plays a critical role in achieving high-temperature cooking during broil cycles. Positioned at the top of the oven cavity, it delivers intense, direct heat for broiling meats, vegetables, and other dishes. A malfunctioning element may result in the oven failing to reach proper broil temperatures, uneven cooking, or complete loss of broil function. Constructed from heat-resistant materials for durability and performance, this replacement part restores optimal cooking capability. Before installation, always disconnect power to the appliance and verify compatibility with your specific oven model.
Foot - Leveller – Part Number: WB02X10521
$25.26
In Stock
Foot - Leveller
Part #WB02X10521
Sold individually.
RECEPTACLE PUSH-IN – Part Number: WB08T10026
$16.47
In Stock
RECEPTACLE PUSH-IN
★★★★★
★★★★★
(9)
Part #WB08T10026
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Burner Grate – Part Number: WB31K10033
$107.37
In Stock
Burner Grate
★★★★★
★★★★★
(6)
Part #WB31K10033
Sold individually.
Range Screw – Part Number: WB1K5062
$16.05
In Stock
Range Screw
Part #WB1K5062
Lens – Part Number: WB25T10041
$16.05
In Stock
Lens
★★★★★
★★★★★
(5)
Part #WB25T10041
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in fact, on. The lens is a little less than half an inch in diameter and is made of plastic. If the light behind the lens still works, you should be able to simply remove the front panel and pop the damaged lens out of position, then replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Common Symptoms of the 137481

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower bake Element would not heat.
229 of 262 people found this instruction helpful.
  • Ronald from Nassau, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
Was this helpful?
Thank you for voting!
Broken heating element
75 of 93 people found this instruction helpful.
  • Paul from anna, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of the oven
7)screw botls back into the oven holding the heating element in place
8)Turn power back on
Was this helpful?
Thank you for voting!
Blown Oven Control Board
56 of 64 people found this instruction helpful.
  • Julien from Barnhart, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and neede d to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
Was this helpful?
Thank you for voting!