292310-1-M-GE-WR17X1363 -Rear Moving Dispenser Blade

( Grid squares measure 1x1 inch )

292310-1-S-GE-WR17X1363 -Rear Moving Dispenser Blade

292310-2-S-GE-WR17X1363 -Rear Moving Dispenser Blade

292310-3-S-GE-WR17X1363 -Rear Moving Dispenser Blade

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Rear Moving Dispenser Blade WR17X1363

Rated by 3 customers

A Bit Difficult

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$ 11.56

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?

PartSelect Number PS292310

Manufacturer Part Number WR17X1363

Manufactured by GE for General Electric, Kenmore, Hotpoint, RCA

Troubleshooting
Customer Repair Stories
Questions and Answers
Related Parts
Model Cross Reference

Troubleshooting
Customer Repair Stories
Questions and Answers
Related Parts
Model Cross Reference

Troubleshooting

This part works with the following products:

Refrigerator.

Part# WR17X1363 replaces these:

AP2064308, 293117, WR17X1006

Customer Repair Stories

Average Repair Rating: 3.3 / 5.0, 3 reviews. What's this?

Sort by:

< Prev
1
Next >

Replace Dispencer blade

Removed the exterior 4 screws and 1 holding the metal rod underneath. Sepearated the plastic parts pulled out the dispensing mechanisim. Removed the lock washer, then removed the spacers and blades. Put the new blades in with the spacers and reversed the other steps and done.

Other Parts Used:

Ice and Water Filter

Rear Moving Dispenser Blade

Blade - Middle

Front Moving Dispenser Blade

Leonard from Hawthorne, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice Maker would not crush ice.

Removed tray from ref. Removed from cover from tray useing a screwdriver. Removed housing, took old parts out. Make sure you take the parts out in order and put new parts back in same order as old parts.

Other Parts Used:

Roll Pin

Dispenser Blade Rest

Icemaker Auger Assembly Spacer

Crusher Stationary Spacer

Kelly from Canandaigua, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

7 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

meatal parts were rusted

the part is fairly easy to take apart, however pay close attention to how things fit and go together. It took me sometime to figure the reassembly out due to my lack of close attention to taking it apart. other than that it is simple.

Other Parts Used: