These valves are where the water supply from the house attach to the washing machine. You connect the hoses to the valve with fill hoses. The fill hoses should have screens installed in them to prevent debris from entering the valve and causing it to stick open or closed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “warm” water. Another common term is water solenoid.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
November 8, 2017
My washer is filling with water when it is not turned on. Is this the part i need to repair this condition?
For model number FTF2140ES3
Hi Dan,
Thank you for your question. This is the most likely part that is causing your issue. I would advise testing it with a multi meter to double check if it is working or not. You can test this part with a multi meter to be sure. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
January 11, 2018
Dispenser drawer will not drain fabric softener.
For model number FAFS4073nro
Hi Dan, Thank you for the question. If the soap is not draining into the tub you may need to take the dispenser apart to clean it out. Sounds like the soap may have built up and created a clog. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mellisa
February 16, 2023
All I need is the dispensor assembly not water valve
For model number FAFW3921NW0
Hi Mellisa, thank you for contacting us. According to our research, the dispenser assembly in your model does not come separately. You may need to replace the entire water valve and dispenser assembly, part number PS2378371, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
