This part is usually located in the bottom of the washer next to the drive motor. It is used to control the drive motor speed as well as the direction for the spin and tumble actions during the cycle.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Motor Control Board
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No spin
No spin, water+drain worked playing with settings. Dart 1-door switch. Got code-tested motor-ok. Replaced motor control board
Matt from MAPLE SHADE, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Pun
August 14, 2017
Does this part 5304504863 speed board, fit this model ? Or 134743500 what is the difference ?.
For model number GLTF2940FS0
Hi Frank,
Thank you for your inquiry. Yes, this part will work with your model number, GLTF2940FS0. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dusty
March 6, 2018
Our washer agitates but won't go into the final spin. Will replacing the control board fix this issue?
For model number GLTF2940FEO
Hi Dusty,
Thank you for your question. If the washer is not spinning, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the door lock and latch and switch assembly, the shock absorbers, the drain pump, the belt, the motor control board and the electronic control board. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Guy
January 27, 2020
Will not spin on any wash settings.
For model number GLTF2940ES3
Hi Guy. If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. Thank you for your question and good luck with your repair.
Hi, long story short, I changed my door lock assembly because my washer wouldn’t spin, both the new and old assembly’s are making a buzzing sound. The door locks and the pause an timer flashing. What’s causing this problem?
For model number ATF6000FS1
Hi Larry, thank you for reaching out. According to our research, the door lock assembly might be loose which could cause it to make a buzzing sound. We would recommend you check the parts connected to the lock assembly. The most related part of this issue is the door strike, part number PS890617. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Copy
