GE/GE_Thumb/00125008i03.gif
See part 613 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

EVAPORATOR FAN BLADE

★★★★★
★★★★★
8 Reviews
$55.95   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12730613
Manufacturer Part Number WR60X30922
Manufactured by GE
Product Description

EVAPORATOR FAN BLADE Specifications

This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. It is made of white plastic and is sold individually. If your refrigerator is noisy and you hear a clicking sound, it is a good indication that the evaporator fan blade is warped or damaged. If the fridge or freezer sections become too warm, the fan could be to blame as well.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Freezer section too warm | Clicking sound | Fridge too warm
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
General Electric, Hotpoint.
Part# WR60X30922 replaces these:
AP6973130, WR60X10075, WR60X10208
Questions and Answers

Be the first to ask our experts a question about this part!

Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 12 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Fan motor making noise due to broken fan blade
1) Unplugged fridge and removed cover over light in freezer.
2)Removed screws holding cover over motor.
3) Removed screws on bracket holding motor in place.
4) Un plugged motor and used razor blade to cut grommet holding wires in place.
5) Plugged in new motor and routed wires through grommet. Then used zip ties to hold grommet together.
5) Re-attached motor bracket and installed new fan.
6) Reinstalled cover over motor.
  • James from Gainesville, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
  • Parts Used:
    WR60X30922, WR60X10185
64 of 93 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator fan was very noisy and we started to notice frost on our food in the freezer.
I should state first that I am a DIYer and have no experience fixing appliances. The fan noise seems to be a common problem. It has something to do with the bearings. Mine was actually hitting the housing in front on the fan as well. Getting into the installation, I knew I had to take the back panel and fan housing off. But I found out that everything needs to come off. This is the ice maker, the housing underneath the ice maker as well as the fan housing and back panel. This isn't difficult but good to know before hand. A quick note, the light bulb housings come out by pulling them forward. It's a good idea to label the screws as you take them out as there are quite a few that need to come out. I replaced the evaporator fan the fan blade and one grommet. In hind sight I should have replaced both grommets as they both showed wear. They are both exactly the same so you can order two of the above. All in all this is a pretty easy fix. It takes a bit of time, but it's not to difficult. Th most difficult thing was the wiring. The fan comes with a six prong connector and has four prongs taken up. There is, what I think is a temperature sensor, that takes up the other two prongs. Since I didn't order that part, I had to cut it out of the old connector and insert it into the new evaporator fan connector. This was a bit difficult and would have been much easier if I had ordered the part. Unfortunately, I don't know what that part is called, but it must be some kind of temperature sensor as it clips on the coil. The wires also run through a blue rubber wire-run that needs to be sliced open. This was pretty easy to do with a small serrated pocket knife. SLice it on the back side of it and pull the old wires out. When you are ready to install, just run the new wires through the hole from the old wires. Once you have replaced the fan the new blade and the two new grommets, it's just a matter of replacing all the equipment. Fan housing first, then the upper housing followed by the ice maker and the back panel. Good luck
  • Jon from Fenton, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Socket set
54 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I Placed A Heat Gun In The Freezer Section To Defrost The Coils And Did Not Return In Time. The Heat From The Heat Gun Rose Upward And Melted All Of The Soft Plastic Parts. The Good News Was That The 16 Parts Were Not Expensive But The One Main Part That Was Needed To Put It All Back Together Took 3
I replaced all of the plastic parts as well as the heat coil that is mounted at the bottom of the coils that keeps the coils from freezing up. If I had not melted the plastic parts the coil could have been replaced in 2 days, 1 day to receive the part and the next to do the work. This is the second time I have had to replace this heater.
53 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High Pitch Noise from the Evaporartor Fan
Firt Removed the Ice Maker Tray and the full ice maker assembly. Removed the plastic shroud that sits over the fan assembly. Since the original connector (or the plug)for the motor had also a temperature sensor attached to it and did not know how to remove and trabsfer to the new motor connector I spliced the new motor to the old connector. It was fairly straight forward. Overall the job was not that difficult and since I was trying to be more meticulous it took a little longer. An average person can do it in around 30 to 45 minutes.
52 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Evap Fan was sqeeling
First I removed the shelf and light cover, then removed 3 screws from the ice make. Then I removed 6 screws from the moter cover (back wall of the freezer) and removed it. I then removed the 2 screw holding the moter. This is where the soldering iron comes in. The wire leads from the old motor were molded into a 3" rubber holder and the end wire plastic connector held 6 prongs (2 from a thermo tube). The new motor only held the 4 moter prongs, 2 were empty. To resolve this problem I cut the wires on both the new and old motor. I then attached the old connector to the new moter with the soldering iron and shrink tubing. Replaced all the parts I had removed and started it up. Works like a champ.....
38 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High pitch noise
My GE refrigerator emitted high pitch noise a short while ago. I tried different dampening methods that helped but not eliminating the problem. I finally replaced the fan, motor, and associated parts and solved the problem. The total cost was about $50.
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
unit making whining noise
i removed srews from area until i could access the fan unit and removed it. wires were not identical so i had to splice some together, most likely could not have been avoided. the exploded parts diagram helped me to be sure that i would have all replacement parts on hand so i wouldn't have to wait for something i had forgotten.
10 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Evaporator motor was not operating properly
Removed the parts and replaced them with the parts you sent me. Now it operates normally.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broke the fan blade when replacing the Evaporator motor
Took cover off, pushed blade on, and replaced cover
  • Rose from Dorr, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
  • Parts Used:
    WR60X30922
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fresh food compartment of refridgerator not cooling. Water dispenser freezing
I am going to start by talking about the problems. I woke up one beautiful morning around 4 am and grabbed my breakfast and coffee. I was not happy and realized there was a problem when the milk was almost as warm as the coffee. I was confused because I could hear the compressor running and the freezer was cold. On line directed me the right direction but I did not want to believe it. I did eventually confirm the evaporator coils in the freezer were frozen over because the heater was evap coil defrost heater was burnt out (multi-meter). I never realized a refridgerator had a heater, weird. The water dispenser in the freezer door had been freezing up for the past year. I could never find a real problem or solution to fix it. I did not find anything relating the evaporator coils freezing over causing the water line to freeze but thinking about the problem it made sense. The freezer was much cooler than it needed to be to cool the fresh food side. The temp control ensures the freezer is at least a certain temp, it did not limit how cold it would get. The hardest part of the repair was waiting for the part. I installation and reassembly of the freezer was easy. I replaced the cooling fan because the old one looked a little chewed up on the sides. It was not recommended or required. After the repair I was able to feel good airflow in the upper freezer and in the fresh food compartment. I think the fix will effect the temperature, the water line and also should help me get more ice from the ice maker (the freezer ducting feeds cold air to the ice maker area). Good luck.
  • Daniel from MARANA, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WR60X30922, WR51X10055
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
5.0
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12730613
      Manufacturer Part Number: WR60X30922
      Brand
      Model Number
      Description
      General Electric
      39631UGXAWW
      Refrigerator
      General Electric
      39639USXAGV
      Refrigerator
      General Electric
      A4425GDTABB
      Refrigerator
      General Electric
      A4425GDTAWW
      Refrigerator
      General Electric
      A4425GDTBBB
      Refrigerator
      General Electric
      A4425GDTBWW
      Refrigerator
      General Electric
      A4425GDTW
      Refrigerator - GE Refrigerator Model A4425GDTW Parts
      General Electric
      ABE20EGEARBS
      Refrigerator
      General Electric
      ABE20EGEARWS
      Refrigerator
      General Electric
      ABE20EGEBRBS
      Refrigerator
      General Electric
      ABE20EGEBRWS
      Refrigerator
      General Electric
      ABE20EGHBRBS
      Refrigerator - BOTTOM MOUNT REFRIGERATOR
      General Electric
      ABE20EGHBRWS
      Refrigerator - BOTTOM MOUNT REFRIGERATOR
      General Electric
      ADRF0MBZARWW
      Refrigerator
      General Electric
      ADRF0MBZBRWW
      Refrigerator
      General Electric
      ADRS0MBZARSS
      Refrigerator
      General Electric
      ADRS0MBZBRSS
      Refrigerator
      General Electric
      BSS25GFPACC
      Refrigerator
      General Electric
      BSS25GFPAWW
      Refrigerator
      General Electric
      BSS25GFPCCC
      Refrigerator
      General Electric
      BSS25GFPCWW
      Refrigerator
      General Electric
      BSS25GFPDCC
      Refrigerator
      General Electric
      BSS25GFPDWW
      Refrigerator
      General Electric
      BSS25GFPECC
      Refrigerator
      General Electric
      BSS25GFPEWW
      Refrigerator
      General Electric
      BSS25GFPHCC
      Refrigerator
      General Electric
      BSS25GFPHWW
      Refrigerator
      General Electric
      BSS25JFRFWW
      Refrigerator
      General Electric
      BSS25JFRJWW
      Refrigerator
      General Electric
      BSS25JFTAWW
      Refrigerator

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service