Part Location Diagram of WH1X2722 GE Lid Bumper
See part 617 in the diagram
Replacing your General Electric Washer Lid Bumper
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Lid Bumper WH1X2722

★★★★★
★★★★★
1 Review

Rated by 3 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 9.12
  Special Order
Get FREE EconoShip on orders over $100! T&C apply

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS271095
Manufacturer Part Number WH1X2722
Manufactured by GE
Product Description

Lid Bumper Specifications

This bumper is sold individually. The bumper is located under the washer lid.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Lid Bumper

Replacing your General Electric Washer Lid Bumper
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Washer, Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WH1X2722 replaces these:
AP2044894, 277932, WH01X2722
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
1.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Evaporator motor was not operating properly
Removed the parts and replaced them with the parts you sent me. Now it operates normally.
Other Parts Used:
EVAPORATOR FAN BLADE Compression Ring Evaporator Fan Grommet - Grey Lid Bumper
  • Michael from LILBURN, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I Placed A Heat Gun In The Freezer Section To Defrost The Coils And Did Not Return In Time. The Heat From The Heat Gun Rose Upward And Melted All Of The Soft Plastic Parts. The Good News Was That The 16 Parts Were Not Expensive But The One Main Part That Was Needed To Put It All Back Together Took 3
I replaced all of the plastic parts as well as the heat coil that is mounted at the bottom of the coils that keeps the coils from freezing up. If I had not melted the plastic parts the coil could have been replaced in 2 days, 1 day to receive the part and the next to do the work. This is the second time I have had to replace this heater.
Other Parts Used:
Defrost Heater Harness Kit EVAPORATOR FAN BLADE Defrost Thermostat Compression Ring DUCT AIR FZ GASKET DUCT FZ GASKET DUCT FZ ORIFICE EVAP FAN Temperature Sensor Water Tube Fastener DUCT AIR SHIELD LIGHT FZ GASKET FOAM CAP CORNER OC BLACK Light Socket & Terminal Lid Bumper
  • Guy from New Palestine, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
63 of 113 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace a rusted washer lid
All the parts were delivered in 3 days, every part fit perfectly.

The on line parts service person was very helpful.

We saved hundreds of dollars!

Highly recommend.
Other Parts Used:
Washer Lid SCREW Wire Form Hinge - Long Hinge Bumper Short Wire Form Hinge Lid Switch Actuator Lid Bumper BUSHING HINGE BUSHING WIRE
  • Jeff from Blacklick, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
19 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 28, 2019
Lid no longer soft closes and just drops down hard if you don't close it by hanging onto it. What causes this?
For model number GTWN8250D0WS
PartSelect logo
Hello Robert, Thank you for the question. This could be an issue with a worn or damaged Door Hinge PartSelect Number PS8756998. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS271095
Manufacturer Part Number: WH1X2722
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52120TAWB
Washer
General Electric
56021A0WW
Washer
General Electric
56031A0WW
Washer
General Electric
56041A0WW
Washer
General Electric
56051A0WW
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56200T2WB
Washer
General Electric
56200T3WB
Washer
General Electric
56200T5WB
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service