Enter the code TAKE10OFF at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on May 28 at 11:59pm EST.
LATCH DOOR WB02X32764
Fits your PSA9120SP1SS!
★★★★★
★★★★★
Rated by 1 customer
A Bit Difficult
15 - 30 mins
Ratings submitted by customers like you who bought this part.
$
8.06
In Stock
Get FREE EconoShip on orders over $100! T&C apply
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your PSA9120SP1SS!
PartSelect Number PS12709833
Manufacturer Part Number WB02X32764
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB02X32764 replaces these:
WB06X10841
Customer Reviews
Average Rating:
8 Reviews
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas M M - April 23, 2023
Verified Purchase
Great part, but challenging to replace.
The part came on time and seems better than original (quieter and smoother) but the spring you need to attach with it is a pain in the neck to reach (behind the actual latch), and lock in place. Took a lot of persistence and a very skinny screwdriver to finally wriggle it in there. All told though, well worth it. Been in place for nearly a month now and the new latch works great!
★★★★★
★★★★★
David S - January 28, 2020
Verified Purchase
PART FIT AND ALL IS WORKING AFTER IT WAS INSTALLED!
The hardest part was getting the door frame apart. I found great instructions on the internet on how to get the front and back of the door separated.
Problem manifest itself by no rotation of the glass platter or heating. The door latch broke internally in the door.
★★★★★
★★★★★
Brandi P - August 15, 2019
Verified Purchase
Fast Delivery; Worked Well
We were able to get the part we needed to replace and it arrived fast. Very happy.
★★★★★
★★★★★
Sue H - April 10, 2019
Verified Purchase
GE Advantium door latch
The door latch arrived quickly and my husband was able to replace it, so everything is in working order again!
★★★★★
★★★★★
Dan J - January 10, 2019
Verified Purchase
Microwave door latch
New o.e.m. part in sealed bag. Quick shipping. Successful repair. Thank you.
★★★★★
★★★★★
KIM G - November 28, 2018
Verified Purchase
Door latch worked great
Correct part. My husband installed latch in the door after watching a couple you tubes. For works great again.
★★★★★
★★★★★
Jack R - September 21, 2018
Verified Purchase
Microwave repair
Correct part quickly came. I watched 4 u-tubes to figure out how to install. Minimum of tools needed. $5 part saved me $600 for over the oven new microwave.
★★★★★
★★★★★
R A - August 17, 2018
Verified Purchase
Microwave latch
Easy to install. Glad I attempted in replacement instead of calling repairman.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 1 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
microwave fan will not shut off when door is closed.
Slide thin blade between black plastic cover and microwave door frame and pry up gently to release snap in tabs for the top. They are about 8 inches from each side of the door lengthwise. Same for bottom, except pry down. Next pry outward at each end with blade between the black plastic frame and door frame to release snap in tabs. Doing
... Read more
this may take a bit of jiggle work and be gentle, this frame is fragile. Next there are 5 small phillips screws behind this frame to be removed. 2 bottom 2 top and 1 by door handle. When screws are loosened keep phillips driver holding the screw in, then cup your hand under each screw and catch them when removing them to prevent screws hitting the floor and bouncing to lostville. Next use the thin blade to pry door outer shell from door frame partially. Insert blade between metal frame and plastic shell of door approx. 4 inches from end lengthwise and pry up to release snap in tabs. Repeat for bottom except pry down. The door may separate at handle end now; if not insert blade vertically at handle end about 3 inches from top between metal frame and plastic door shell and pry out and again about 3 inches lower. Use fingers to pry handle end of door apart far enough to see the spring holding the latch. Use fingers or small needlenose pliars to undo spring then slide up plastic latch and remove. Place old spring onto hook in the middle of the new latch, position new latch with latch arms with circles pointing downward back onto metal frame with upper and lower latch guides hooking into metal frame. Push latch down and reconnect spring to metal hook in door frame. Slide new latch up and down a little bit to ensure proper operation. Next squeeze metal frame and outer door shell together until you hear the snap ins snap close. Next put a small bit of wax on end of phillips driver to hold the small screws and reinstall them. Next insert the end of the black plastic frame towards the hinges first into the door then rest the black plastic frame lightly against the microwave door. Press against the top back corner about 4 inches from the hinges and squeeze together the door and the frame. It will make snap sound then repeat for bottom corner. Next squeeze together about 4 inches from handle end at top then bottom to hear snap sound. Finally squeeze the vertical part together behind the handle and make sure black plastic frame is flush with metal door frame and you are done. Again these parts are fragile so take your time.
Read less
-
Dan from FORT WAYNE, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12709833
Manufacturer Part Number: WB02X32764
Manufacturer Part Number: WB02X32764
Brand
Model Number
Description
Back to Top
LATCH DOOR
$
8.06
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.