Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tara
July 22, 2021
My dishwasher is only a month old and it is showing an er all of a sudden. Do I need a new board?
For model number FGID2468UD1A
Hello Tara, Thank you for the question. The The Er error code on these Frigidaire dishwashers usually means a touch pad or key pad failure. If the appliance is new, you should be able to contact Frigidaire to have it repaired under the Warranty. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
July 18, 2023
No power is it the board
For model number Fglp2468uf04
Hi Gary, thank you for your inquiry. First, make sure the dishwasher is getting power first. If so, remove the kick panel below the door and look for the 3" x 3" sheet metal box. Remove the cover and you can see the junction box wire connections to the dishwasher. These wires will often short out, melt, or get loose. Check all the connections and if they are faulty or burnt, cut the wires back and re-wire the junction box (with the power disconnected to the dishwasher). If everything checks good, you will need to order and replace the control board, part number PS12585693, across the top of your door because it has failed. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
