This turntable ring in your microwave makes sure that your glass tray rotates smoothly. Located just above the internal floor, it supports the tray so that your food cooks evenly. A broken turntable ring will look warped or cracked. Additionally, the rotation may become uneven or wobbly. You should replace the ring when it is damaged, by simply taking out the old one from your appliance. Please note that this replacement part is sold individually and is a genuine OEM product, specifically designed for your microwave.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sharon A - April 28, 2023
Verified Purchase
Microwave ring turn
It fit perfectly, it’s exactly the part I needed to make my glass plate turn in my microwave oven. Somehow one portion of the original ring turn melted or got burned and no longer worked very well. It was so nice to be able to go on the computer and go to your Parts website and order a new piece that I needed. Thank you for being available.
★★★★★
★★★★★
Nicole P - April 20, 2023
Verified Purchase
Perfect fit - finally!
We moved into a house with a built in microwave that was newer, but clearly had the wrong ring in it. I have been looking for a replacement and not using the microwave for so long. Finally found this site. Perfect fit. Part arrived quick and is soooo worth it. Happy with my purchase!
★★★★★
★★★★★
Elaine C - May 29, 2021
Verified Purchase
Fix for noisy microwave
My MIL”s microwave was making this loud clunking noise, we thought we needed to replace it but realized it was the ring turn. We didn’t know that there was a replacement for this. We looked it up and found it. We replaced the old one and it works perfectly. No need to replace the microwave. Great solution.
★★★★★
★★★★★
Robert D - December 29, 2020
Verified Purchase
Right part. Works
Part works
★★★★★
★★★★★
Adriano M - November 18, 2020
Verified Purchase
Turntable ring for my Whirlpool microwave
Looked the WEB over for my micrwave support ring that broke. Part Select had the BEST price and shipped the product very quickly.
The ring fit perfectly.
★★★★★
★★★★★
Brad B - August 1, 2020
Verified Purchase
Replacement Part - FAST Shipping
After a mishap with our microwave we needed this replacement part so the turntable would work again. Found the part on Partselect, placed the order and less than 2 days later it was delivered. Incredibly fast service! Would not hesitate to order from Partselect again.
★★★★★
★★★★★
Dan T - May 5, 2020
Verified Purchase
Easy Peasy
If you ordered it you know how to install it. Part looked like factory original.
★★★★★
★★★★★
Barb H - October 25, 2019
Verified Purchase
TURNTABLE FOR MICROWAVE
Received exactly what I ordered and on time and great condition.
Thanks
★★★★★
★★★★★
Michael S - October 23, 2018
Verified Purchase
great worked as expect the plate dont wobber no more great part
this was great plate nice and steady now thanks part select
★★★★★
★★★★★
Janet A - September 28, 2018
Verified Purchase
Broken on arrival
Called upon receipt of the broken ring and was told a credit would be issued. Was told your company recieved the part prepackaged and all you did was place a shipping label on it and send it out to me. This seems to be a substandard policy and indicates a lack of good customer service. Credit for shipping not issued.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Very unusual. we had a brief fire inside the microwave which destroyed all the moving rotary parts.
First, we had to clean up all the interior surfaces, which was just cleaning. There was no internal damage. Then, just setting the center connector, rotary rollers and glass plate. Simple
Microwave didn't have support ring when house was purchased.
Removed turntable Place support ring in track Place turntable on support ring. Easy, peasy!
Leon C from MEDFORD, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the wheels came off
Took out turntable and swapped out old one with a new bright and shiny New one, ring that is. It was easy using the part from parts select Thanks Paul
Paul from EXETER, NH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rattling noise when turn table was in motion
Unplug any appliance before any work is done. The microwave is a hanging unit under kitchen cabinets. First I removed the turn table, rollers, and connector by lifting them out. Second I removed all the attaching Phillips head screws that hold the bottom cover on. Once removed the cover will hang and give access to the drive motor gear as
... Read moresembly. It's held in place by 2 torques head screws. Remove these, lower the motor, and disconnect the 2 wires that plug onto it. A small pick or similar tool is needed to release the connectors latches. reassemble in reverse.
The old coupling melted and the tray cracked in half.
It took me 15 minutes total - 5 minutes to clean the microwave, 1 minute to install three new parts, and 9 minutes to enjoy my celebratory glass of wine!
glass turntable broke in half, ring turn needed replaced
I removed the broken tray and ring-turn and replaced it with the new Service was fantastic, parts were ordered one day and received the next
Gail from Cincinnati, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rona
April 28, 2023
Before ordering I want to be sure this will work for my model. Pls advise.
For model number UMV1160CW
Hi Rona,
Glad to hear from you. Yes, this would be the correct turntable ring for your microwave. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Freddie
May 15, 2023
I need glass replacement plate for whirlpool microwave model # mh1140xmq-3
For model number 0231895
Hi Freddie, thank you for reaching out. The part you are looking for is a glass cooking tray, part number PS373741. We hope this helps!
Is this the correct turntable for my whirlpool microwave?
For model number YWML 75011hw-3
Hello Susan, thank you for reaching out. The part you mentioned is not a turntable, it is the turntable ring and is not compatible with your model. The glass tray support, part number PS12578307, and the glass tray, part number PS12711337, fits your model. We hope this information helps!
The ring turn looks different-color, etc. I searched by model number on my microwave and this is what came up. Just want to be sure before i spend 32.00 that its right. It looks like my ring lost its "cushion" on the rollers
For model number Wmh32519hb05
Hello Cindy, Thank you for your inquiry. We have researched the model number you have provided and show that this is the correct part for this model. We hope this helps.
Was this helpful?
Thank you for voting!
Victoria
June 15, 2022
I keep buying parts and returning them because they’re not correct. There’s not a practical way to find the part number needed. ?? What are the dimensions of this and the accompanying turntable? The one that I’m attempting to use now “sort of” fits but it’s too small and wobbly. If I had the correct base part, it should “theoretically” stabilize it. Please help. Confused mom who’s addicted to a microwave.
For model number Not sure.
Hi Victoria,
Thank you for your question. The turntable roller guide measures approximately 7-1/2 inches long.
For information on the correct turntable roller guide for your microwave, we would need the model number from it. We have included a link from our website that you may use to find the model number on it. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
