Average Repair Rating: 2.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water contamination on the selector board. Dishwasher would not run
The wife damaged the latch assembly, so that had to be replaced. The control assembly comes with all of the PCBs, already connected together. This is very straight forward. Unplug the dishwasher. Working from the inside of the door, remove all of the screws around the perimeter, noting where the "long" screws go for when you go t
... Read moreo reassemble. The front panel (with the handle) will come off. Set it aside. Remove the two latch screws and the whole electronics assembly will come free. There are only five or so connections to swap on the largest of the three PCBs. Simply lay your new board next to the old, oriented in the same manner, then start pulling connectors off the old and onto the new until complete. Unscrew the control and indicator boards, and screw in the new ones. One note on the latch assembly. My new one was shipped in the "closed" position. If you replace yours, make sure the receive is open before you install or your will likely be taking it apart again. Reassemble the door. With the door open (ajar), plug the dishwasher back in and test the on/off and selector buttons. That's it.
bottom door gasket replacement/door latch replacement
Need to remove door from hinges to allow to SLIDE gasket thru small lip on door.After using soap and cleaning lip on dishwasher face ,Gasket never feels to grasp lip properly.Identical gasket from old design,just difficult to install.Door latch was also easy to install,BUT LATCH WAS PURCHASED IN LOCKED POSITION.Make sure to roll tumbler i
... Read moren latch ,or it will never lock.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
May 2, 2018
Hi, will this part work with my model number?
For model number GLDT696T00SS
Hi Doug, Thank you for the question. Yes, this latch will work on the model number provided. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
February 21, 2018
This is the model number on my dishwasher , serial number 801373c. Will your latch be the part that will replace and fit what i have here?
For model number GLDT690TBB00
Hi Nancy,
Thank you for your question. Yes, the latch you have referenced in your question to us is the correct part for your appliance. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dorian
February 12, 2019
Door latch
For model number gldt696dooss
Hello Dorian, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS12068850. Good luck with your repair!
Was this helpful?
Thank you for voting!
Daryl
August 7, 2019
Will part wd13x23417 fit my GE profile dishwasher. Replaced latch assembly still won’t latch.
For model number PDW1800NWW
Hello Daryl, thank you for inquiring. Yes, this Latch Assembly part number PS12068850 is the correct replacement for on your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
Dana
August 8, 2019
Does the switch assembly include the two switches as well?
For model number GLDT696TSS
Hello Dana, thank you for inquiring. The Switches are sold separate from this replacement Latch Assembly for your model. They are Microswitch part number PS12342785. They are sold individually. Good luck with your repair!
Was this helpful?
Thank you for voting!
Deb
5 days ago
how do you ensure the latch is in the unlocked position. replaced and it will not engage
For model number GLDT690D00WW
Hello Deb, thank you for reaching out. According to our understanding, we would recommend checking that the latch is properly installed. If the issue persists, then you may need to replace the micro switch, part number PS12342785. It detects when the door is closed so the dishwasher can start. Glad to be of assistance!
