This infinite switch knob is an inch and a half in diameter. It is made of plastic and has an orange indicator line as well as orange lettering denoting the 'off' position. There is also white numbering used to indicate the temperature level of the surface burner.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gary M - January 14, 2019
Verified Purchase
Perfect
Perfect look, perfect fit, restored our Jenn Air cooktop very well. Identical look as the original.
★★★★★
★★★★★
Kathy M - July 12, 2018
Verified Purchase
What a difference a Knob makes!
Good and sturdy, easy to replace and made my stove look much better. These numbers don't look like they'll come off like the old ones I'd replaced twice before.
★★★★★
★★★★★
Jim E - June 19, 2018
Verified Purchase
Perfect match to the others.
Our daughter's dog chewed one of the knobs when we had them off for cleaning. The new matches perfectly.
★★★★★
★★★★★
Jeffrey P - March 1, 2018
Verified Purchase
Very easy to replace the switch knobs, just pull off the old and push on the new one.
The parts are brand new, but different than the original equipment. The numbers appear to be painted on the knob rather injection molded into the plastic. I will see how long the last.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
both burner switches failed intrenally
simply remove and replace th switches using a screw driver an a pair of needle nose pliers
1. Removed all four switch knobs (to be replaced with new knobs purchased with the replacement switch.(unnecessary if you are not going to replace all the knobs) 2. Removed the switch plate assembly by removing two sheet metal screws. 3. Inverted plate assembly and removed five wires and then removed two additional screws t
... Read morehat secured the faulty switch to the plate assembly. 4. Reconnected the five wires and attached the new switch to the plate assembly. 5. Re-positioned the assembly on the cooktop and secured with the two sheet metal screws. GAME OVER!