Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas F - December 7, 2023
Verified Purchase
Water and ice valve
At first I ordered the wrong valve (water valve) ..Then ordered the correct one ( water and ice valve) . Water always worked, but ice was leaking water in the bin. Return the wrong one, and was surprised how easy it was to get done. Thanks!!!
★★★★★
★★★★★
Timothy R - July 29, 2021
Verified Purchase
replacement water inlet valve for my Maytag fridge
I ordered the part, being 95% sure it was the right fix. I ordered the part, it arrived when I expected it, and I installed it with ease. Correct part, correct fix, correct supply house!
★★★★★
★★★★★
Lester A - August 29, 2020
Verified Purchase
Fast service. Right part
Turn around time from ordering was very good. Part was perfect and just what I expected. However, it did not fix the problem. Took a chance that it was either the inlet valve or the icemaker mechanism itself. The valve was easier and cheaper to replace. Guessed wrong. Now ordering the mechanism. All my doing. Part was exactly what I ordered.
★★★★★
★★★★★
Daniel W P - June 5, 2019
Verified Purchase
Part arrived in timely manner
Part matched the original inlet water valve and was easily replaced.
★★★★★
★★★★★
Ron P - October 4, 2018
Verified Purchase
Inlet valve
Easy to replace. Did not fix the problem of water overfilling the ice tray and running down the ice chute on the door.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
not making ice
watched video took me less than 5min. to replace inlet valve. an cleaned my frig at the same time that took me longer to do.
Robert from Allentown, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water from door, but icemaker working
I easily ordered the part. When it came in, I just shut off the water, disconnected the electricity, and followed instructions to remove shelving and drawers. Then removed the rear interior cover, removed the old water inlet valve and installed the new one. Just a couple moldex wire connections and the 3 water lines in and out. Don't know
... Read more if this is still ok, but so simple a caveman could do it. Sorry Geico.
Read less
Timothy from LITCHFIELD, NH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker was letting too much water in and freezing a big block of ice instead of making cubes
Looked online for instructions. I had to remove the shelves from inside the frig, then pop off part of the right inside back wall. The way the 3 water lines attached to the inlet valve was a terrible design. There are plastic little collars that need to be pushed back to release the water lines from the old valve, then when you install t
... Read morehe new valve, you need to push them back to reattach the water lines. Once installed, one had a leak. No matter how hard I tried I couldn't get the little plastic collar to disengage. I couldn't push the line in further and I couldn't get it back out. Ended up cutting the line off at the valve just to get it out. Then had to cut out the piece that was still stuck in the valve. Tried to install it again and it leaked even more. Ended up putting the old valve back in and throwing away the $130 new inlet valve because there are no returns on electrical parts. Total waste of time and money ! ! ! Not happy to say the least.
Read less
Mark from MT PLEASANT, MI
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not receiving water refill
Replaced water/ice maker inlet valve from video instructions from Just Answer. The inlet tube for the water dispenser would not cede in the valve and this created a leak problem from the water dispenser connection. Called repair tech and he could not get the line to cede correctly in the inlet valve. Am going to request a replacement p
... Read moreart. This has been very frustrating!
Read less
James from LEWISTOWN, MT
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
April 11, 2018
They put a new ice maker in worked for 5 days then stopped no water. The water works in door but none to ice maker ...replaced the water valve still no water now water drips from dispenser...
For model number MFI2269FRZ01
Hello Robert, thank you for your question. If the valve and the icemaker have been replaced, the issue you're having is going to be within the dispenser section. It sounds like an issue with either the electronic control board, where you make the selections for ice, water, cubed, crushed, ect, or the chute assembly. I would recommend replacing these parts. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
March 1, 2018
My ice maker started dripping water into the ice maker. The water dispenser works fine. Do i need to replace the water inlet valve ps11755669 on the back of the fridge or do i need to replace the inlet valve ps11752594 located on the back wall of the fridge? Thank you for your response.
For model number GI6FDRXXY09
Hi Brian,
Thank you for your question. If there is water leaking into the ice maker, then you will need to check the water inlet valve with a multimeter to see if it is working correctly. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve.
If the test you conduct with your icemaker water inlet valve does not produce these results, then you should replace the component. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Steve P
March 8, 2019
The water flow through the door is s l o w (1/2 cup in 50 sec.). We've replaced the filter, without improvement. We've been advised to flush the lines with vinegar to remove possible calcium build up. Do you have any further thoughts or suggestions?Thank you very much,
steve p
For model number GI0FSAXVY011
Hi Steve,
Thank you for your question. You should check the water pressure going into the refrigerator and check the water inlet valve with a multimeter to see if the part is working correctly. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Reuben
March 28, 2019
We get water to icemaker ok and get ice. When ice maker gets water there is no noise. When we get water from door there is a noise. It started after changing the filter. I checked install of filter and it was ok. Sill noise. I tried another filter in case the first one was bad. Still noise with second new filter. Our handyman said we needed to replace the water valve at the back of the cabinet. Is part # 20 of cabinet the correct valve that sends water to door water part and will replacing valve eliminate the noise?
For model number GI6SARXXF01
Hello Reuben, thank you for inquiring. Yes, Inlet Valve part PS11752594 is for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
May 17, 2019
Maytag refrigerator, put in a new filter (inside upper right side) then turn on water supply and water drips out where filter attaches. Remove filter from refrigerator and turn on water supply and water shoots out everywhere.
For model number MF12067AES11
Hello Rick, thank you for your question. We would recommend checking the water filter head and reservoir assembly as the filter may not be connecting properly. If the filter is removed and reinstalled and still leaks, you will want to first replace the reservoir and head assembly PartSelect Number PS3654989. If the filter is removed and not needed, a filter bypass plug would be required. If you do not have this bypass, the head and reservoir would have to be ordered as well, as it comes with the bypass plug and the bypass is no longer available separately. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Darrell
December 28, 2021
Ice maker is making ice but no water is coming out. I can hear a noise when I hit the dispenser.
Does this sound like an inlet valve replacement or a frozen water line?
Thank you
For model number mfi2569vem4
Hi Darrell,
Thank you for your question. If your refrigerator is not dispensing water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water filter, the water filter bypass, the dispenser door spring, the dispenser actuator, the water reservoir and the water inlet valve. We have included a link that you may reference on how check these parts. We hope this helps! Good luck with the repair!
Ice maker isn't making ice. The water dispenser is working and I recently changed the filter, a few days after it stopped making ice.
For model number MFI2570FEZ00
Hi Douglas, thank you for getting in touch. Based on the description that you have provided, we would recommend making sure that the water tube is properly connected to the ice maker and is not blocked or damaged. If that is not causing the issue, make sure that the shut-off arm is not in the off position, as it may have stopped the ice production. If the issue persists, then you may need to check the ice maker assembly, part number PS11769140, as it might be faulty and may need to be replaced. We hope this helps!
The Water dispenser runs slowly, in slow pulses, until there is not enough water pressure to dispense water. The fridge cannot run with a filter inserted as NO water comes out of the dispenser. It currently runs with a bypass. I am wondering if there is something wrong in the filter housing or the inlet valve. any thoughts?
For model number KRFC400ESS01
Hello Sandy, thank you for your question. If the water line behind the refrigerator is kinked or bent, the water pressure will be reduced. A clogged water filter PS11722130 can restrict the flow of water to the dispenser and prevent the dispenser from working properly. Or, you can install a bypass cap PS12731165 to increase the pressure. We hope this information will help you.
Was this helpful?
Thank you for voting!
Shamsher
February 7, 2020
There is continuous water leak from behind the ice and water dispenser on the outside of the fridge. The leak is not from the water spout. Water system is ok. Leak is coming from the ice dispenser module in the fridge into the drain area of the ice flow and pours behind the push lever of the ice at the front of the fridge. There is no leak from the ice maker inside the fridge. Kindly let me know what could be the issue and part/s required to resolve.
For model number KFFC400ESS
Good Day Shamsher. Thank you for your question in regards to your unit. The model number that you have provided does not match to anything in our database. The closest model number that we are able to find is the following: KRFC400ESS00. Our research shows that you may need a P-Trap Drain Tube Kit. We do have a video that we have made that should be able to assist you with diagnosing if this could be the problem. It can be found searching the following URL: https://www.youtube.com/watch?time_continue=214&v=abKsJn_7I-A&feature=emb_logo. There is also a possibility that your unit's water filter may need to be replaced as it may be clogged. You can order this part either online at our website www.PartSelect.ca or by calling us by phone at 877-910-4613. Best Regards.
When water mains is turned on to the fridge there is continuous water leak from behind the water dispenser even when the dispenser lever is not pressed. Any idea for the reason of this problem ? And parts required to resolve.
For model number KRFC400ESS00
Hello Shamsher,
Thank you for your question. Our sources suggest replacing the drain tube kit under part PS8691807 for your model to fix the leak behind the dispenser. We hope this helps.
