Maytag/Maytag_Thumb/56395.gif
See part 6 in the diagram
Replacing your Maytag Range Broil Element play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Broil Element

★★★★★
★★★★★
8 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MER6755AAS Range!
 Fits your MER6755AAS Range!
PartSelect Number PS11752536
Manufacturer Part Number WPW10310249
Manufactured by Whirlpool
Product Description

Broil Element Specifications

This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling | Little to no heat when baking
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Maytag, Magic Chef, Crosley, Amana.
Part# WPW10310249 replaces these:
AP6019230, 74003041, 7406P205-60, W10310249
Questions and Answers

Be the first to ask our experts a question about this part!

Part Videos

Replacing your Maytag Range Broil Element

Replacing your Maytag Range Broil Element play video
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 9 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Top element wasn't working on ~1.5 year old oven
    FIgured it was either a bad heating element or a realy expensive repair so I purchased a replacement element to rule out the simple and inexpensive possibility. Pulled oven out from wall and disconnected power supply. Removed retaining bracket from top of oven, two screws that held in heating element, disconnected from fittings, replaced with new element, and reattached screws and retaining bracket. Plugged in power supply, tested lower oven (it worked just fine) pushed oven back against the wall. Threw away the old element and packaging. Job done.
    • gabrielle from Hopewell Junction, NY
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    14 of 15 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Broil element broke/burned out
    I just bought my first condo and sure enough something broke in my oven. I thought "Oh great - I'll need to buy a new one..." After some research and a friend's advice - I was assured that I only needed to replace the broiler element. After researching the issue I googled replacement parts which led me to this web-site. I was amazed how easy and inexpensive it was for me to replace the part. The directions were easy, simple, and spot-on! The instructions that were provided were easy to follow. I also utilized YouTube instructions as well for additional visual guidance. The shipping was super fast and the element was packaged very well. Thank you so much!
    • Jonathan from Woonsocket, RI
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    6 of 8 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    broil element burn out
    Shipped on timely manner,I will order again from Part Select, installing was a 15 minute job, that what I did, 1 unplugged stove, 2) removed 4 screws, (2 on top bracket and 2 on back) , 3) slide unit out couple inches enough to disconnected the wires from each end of unit and removed old part, installed new unit by reconnecting end wires, pushing unit slowly toward back of oven until wires find it's right position, set it back in place with the 2 screws on top bracket and 2 screws on back, done!!
    • JORGE from CANTONMENT, FL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    6 of 8 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    broiler element would not heat up.
    not to offend anybody but what i learned on prior posts helped alot..
    1. remove unit and unplug.
    2. remove door by opening to 45 degree angle and lifting door face towards you.
    3. remove back panel to unit.e.
    4.unscrew burner element from back inside of oven.
    5.gently pry clip off each off burner element from rear of unit. Pull gently towards you.
    6.unscrew support from inside oven.
    7. remove old element and just reverse directions to reinstall.
    • debbie from walden, NY
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    4 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Broiler Element was snapped in to two pieces
    The toughest part was seeing the two screws in the dark rear of the oven, so a good flashlight with adjustable beam is helpful. After removing the pots and pan drawer from it's tracks, take the opportunity to clean out that space underneath the drawer when you unplug the oven. Once that was done, I removed the bracket screws holding the broken broiler element on the roof of the oven and the two screws holding the element in the rear of the oven. It's an uncomfortable reach so, setting a flashlight on the open over door helped me see what I was doing. The element slides right out of the holes from with in the insulation behind the oven's rear panel. Each side is connected to a wire pin that may need a good tug with pliers to slip the wire clip off the old element end. The new element connected right to the old wire clips with ease. You may have to jiggle the element end as you poke it back through the hole into the insulation where it came from. The element ends screwed right back into it's original position with the old screws. I slipped the roof bracket over the new element and reattached to the oven roof. I plugged the oven back in, replaced the drawer on it's tracks, tested the broiler and it works like a charm. Total time 35 minutes.
    Other Parts Used:
    ELMNT-SURF
    • Patricia from Severna Park, MD
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    3 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    broiler element broke
    removed screws and disconnected the wires removed element and did the replacement less than 15 minutes, and cost less than locally by 25.00 and received part the next day. EXCELLENT
    • michael from Norwich, CT
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    3 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Broiler element broken, burned and arced about 4in from rear of oven
    1) Unplugged the electrical cord and removed the oven door (only when easy); and, jockeyed the oven into better working area.
    2) Removed about 9 screws holding rear sheetmetal backing plate to disconnect each of 2 electrical wires from the old element.
    3) Removed 2 screws holding element to back of oven and 2 screws from small bracket supporting end of element to top of oven.
    4) Replacement element was severely damaged. It was at the very bottom of a box 20 by 15 by 15.5 inches high with the large continuous bubble wrap stacked only on top. Each of the wire ends were sharply bent; one almost 180 deg. pointing in the opposite direction, and the other about 120 deg. The element itself was about 4-5 inches out of square. Using two large needlenose pliers I carefully bent each wire back to its proper place. Next I carefully exerted pressure on the element to gradually form it back to as near its correct shape as possible. (Only the inside of the shipping box showed the signs of possible damage.)
    5) Installation- The element, from inside the oven, was placed back through the two holes in the rear of the oven and secured with 2 screws.
    6) The bracket supporting the front of the element was slid onto the element and attached to the top of the oven.
    7) Attached the 2 electrical oven wires to the 2 element wires, making sure there was good clearance to prevent any short circuit, plugged the oven cord in to 230volts, and checked it out with power to the broiler to give myself some confidence that the damaged wires would not quickly break. It seemed to work and I unplugged the oven.
    8) Reinstalled the backing plate with the original screws, plugged oven back in, and moved the oven back to its place and replaced its door. It is working and my wife is cooking.
    • Noel from Pollock, ID
    • Difficulty Level:
      Very Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    2 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Broil element non functional
    Power turned off. Door of the oven lifted off. Four screws removed, old element pulled out to reveal electrical connectors. Wires easily removed, and element discarded. New element connected to the two conductors, four screws installed and the job was completed.
    Very easy. Took about 10 minutes.
    • Clifford A from Melbourne Beach, FL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Broiler Element on Upper Oven Cracked in several places.
    I've been trying to remove the bracket at the roof of upper oven so I can get to the broiler element itself. The screws are in place so tight, the won't move. I've used regular as well as ratchet screwdrivers and the screws still won't move. I don't want to spray WD 40 in oven because of a possible fire hazard, so I haven't changed out element yet. Tried calling customer service for advise, but to no avail. All other screws loosen easily. What should I do next.
    • Phillip from SAN ANTONIO, TX
    • Difficulty Level:
      Very Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Screw drivers
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      8 Reviews
      4.6
      Filter By Rating:
      • 5 Stars
        6
      • 4 Stars
        1
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11752536
          Manufacturer Part Number: WPW10310249
          Brand
          Model Number
          Description
          Kenmore
          22-98002
          Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
          Kenmore
          22-98009
          Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
          Kenmore
          62260002600
          Range
          Kenmore
          62260003600
          Range
          Kenmore
          62260008600
          Range
          Kenmore
          62260009600
          Range
          Kenmore
          62960002600
          Range
          Kenmore
          62960002606
          Range
          Kenmore
          62960003600
          Range
          Kenmore
          62960008600
          Range
          Kenmore
          62960008606
          Range
          Kenmore
          62960009600
          Range
          Kenmore
          62960009606
          Range
          Kenmore
          66598002700
          Range
          Kenmore
          66598003700
          Range
          Kenmore
          66598009700
          Range
          Kenmore
          66598013700
          Range
          Kenmore
          66598019700
          Range
          Amana
          ACS4140BB
          Range - Electric
          Amana
          ACS4140BW
          Range - Electric
          Admiral
          AER1110AAH
          Range - Freestanding, Electric
          Admiral
          AER1110BAH
          Range
          Maytag
          AER1140AGH
          Range
          Admiral
          AER1150AAH
          Range - Built-in, Electric
          Admiral
          AER1350AAH
          Range - Freestanding, Electric
          Admiral
          AER1350AAL
          Range - Freestanding, Electric
          Admiral
          AER1350AAT
          Range - Freestanding, Electric
          Admiral
          AER1350BAH
          Range
          Admiral
          AER1350BAT
          Range
          Maytag
          AER1360AGW
          Range - Freestanding, Electric

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service