Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Raymond N - January 6, 2022
Verified Purchase
Part Worked Great
The support is needed to replace the switch as the locking tabs are weak and often snap off easily.
Also, pay close attention to the torque (t-10) screw when threading it into the new support bracket as the switch needs to be in the closed when the door is closed.
★★★★★
★★★★★
Bill J - April 19, 2019
Verified Purchase
Repeat customer - parts
I have used PartSelect before and have been happy in the past. The diagrams they have make it easy to find the part you need. What I am unhappy about is what they are now charging for parts. I only got from PartSelect what I couldn’t confirm was the right part from Amazon. Bought three switches from Amazon for $5 with free shipping. Those same switches from PartSelect would have cost me well over $30 as one of the switches alone cost $25 and then you have to pay for shipping. Hope Amazon will do a better job in the future identifying correct parts.
★★★★★
★★★★★
Robert C - November 24, 2018
Verified Purchase
microwave repair
Part Select was very helpful with identifying parts. I received parts very quickly and they fixed my problem. I will use Part Select again if I need repair parts.
★★★★★
★★★★★
Ron R - March 20, 2018
Verified Purchase
Microwave door interlock sw. bracket
The part was a direct replacement . It fit well . Works like it should.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top support for door switch broke.
Part of the support was missing. I had to remove the two switches and put them in the new bracket Had the switches reversed and started blowing fuses. Reversed them and changed the fuse and it started working.
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 P
... Read morehillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shirley
April 18, 2018
Interlock: It says to see 12a on the diagram. There is no 12a. It only shows 12.
For model number MH53520CS-2W
Hi Shirley, Thank you for the question. Very sorry for the confusion. Item #12 on the diagram is the top #12 on the diagram and #12A on the parts list is the bottom #12 on the diagram. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
November 15, 2017
When i close the door and try to start it it says door i thing the bottom latch is not catching so what do i need to replace?
For model number WMH31017AS0
Hi Ron,
Thank you for your question. I would suggest testing your micro switches with a multi meter to see which one of them you will need to replace. They should all show 0 ohms if they are working correctly. If they do not then you will need to replace that switch. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Shirley
April 18, 2018
It appears that the top support interlock and the bottom interlock support are priced out differently. What is the difference between the two supports that would make them price out differently? Thank you.
For model number WMH53520CS2
Hi Shirley, Thank you for the question. We base the prices for the parts on the manufacture prices and discount down from there. Whirlpool does not state a reason for the price difference. Hope this helps!
Was this helpful?
Thank you for voting!
Barb
March 26, 2019
My door won't close properly so microwave won't run. If you close it, the light stays on and it acts like it is running.
For model number Whirlpool WMH1162XVS1
Hello Barb, thank you for contacting us. For this symptom, there are a few parts that may provide a fix. You may want to try replacing the Top Interlock Support part PS11745301, the Interlock part PS11749178, or the Interlock Spring part PS1964350. We hope this helps.
Was this helpful?
Thank you for voting!
Jim
February 6, 2020
Won’t turn on but if open/shut door and push clear many times it will work again. Is this the part I need?
For model number MMV5220FZ2
Hello Jim, Thank you for the question. We suggest testing the Door Switches first to check for continuity with a multi meter. If the switches are good, you may have a defective Control Board. We hope this helps.
Hi Greg, thank you for reaching out. According to our research, the issue is most likely with the following parts: door latch, part number PS979580, and door stop, part number PS2343169. We hope this sorts out your problem!
Sometimes when you open the door the light does not come on so when you close the door it won't start.
And sometimes if you wait long enough with the door open the light comes on and then you can use it.
Thanks Rick
For model number KMHS120EBS-2
Hi Richard, thank you for reaching out. According to our research, you may need to check the door interlock switch, part number PS2361111, to fix this issue. We hope this helps!
We put the new parts into our microwave to fix it not working, the interlock support and cam plate were bad. It is working now, sort of. It will come on now but sounds like something is rubbing. Has anyone else had this trouble and what do we look for?
For model number MMV4205DS-2
Hello Kathleen, thank you for the question. According to our research, the issue is probably due to the turntable motor, part number PS11729872. We hope this helps!
Hi John, Thank you for writing. The Top Interlock Support is PartSelect Number PS11745301 and the Bottom is PartSelect Number PS11749178. We hope this helps!
bottom door latch not catching, but if door is held closed by pushing on the bottom, the microwave works fine
For model number IMH172FS0
Hello John, thank you for your question. We recommend replacing the bottom Interlock support PS11749178 as well as the Top Interlock support PS11745301. Good luck with your repair.