9491943-1-M-Whirlpool-W10562613-CAM-PLATE

( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

CAM-PLATE

Rated by 1 customers

Really Easy

30 - 60 mins

Ratings submitted by customers like you who bought this part.

$ 18.20

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS9491943

Manufacturer Part Number W10562613

Manufactured by Whirlpool

Troubleshooting
Questions and Answers
Customer Repair Stories
Model Cross Reference

Troubleshooting
Questions and Answers
Customer Repair Stories
Model Cross Reference

Troubleshooting

This part fixes the following symptoms:

Door not closing properly | Won’t turn on

This part works with the following products:

Microwave, Microwave Oven Combo.

This part works with the following products:

Whirlpool, Maytag, Amana, KitchenAid.

Part# W10562613 replaces these:

AP5805913, W10156811, W10508437

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Jim

March 10, 2020

Hi do i need a door latch with the part i’m ordering ( door latch actuator) for my Whirlpool microwave?

For model number WMH31017AS4

Hi Jim, thank you for your question. You would only need it if it is also broken. Otherwise you should be able to reuse the part that you have there. Good luck with your repair.

2 people found this helpful.

Was this helpful?

Thank you for voting!

< Prev
1
Next >

Customer Repair Stories

Average Repair Rating: 3.8 / 5.0, 1 reviews. What's this?

< Prev
1
Next >

Sort by:

Door switch inconsistent operation for Open/Close sensing.

Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.

Other Parts Used: