The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the dishrack. If your clip is cracked or damaged, it is best to replace this part. To repair, first lift the release tab and hold the other side to prevent it from falling off. After lifting it off, you can set the new clip on the tine row and lock it up. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Remember to wear work gloves as a safety precaution. This repair was rated as very easy by our customers and should be done in 15 minutes or less.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Dishwasher Tine Pivot
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
Part# WPW10082853 replaces these:
AP6014920, W10082853, WPW10082853VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
28 Reviews
5.0
Filter By Rating:
5 Stars
28
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bill I - January 28, 2024
Verified Purchase
Very easy repair. No problems.
Part was easy to install. My Dishwasher is back in working order.
★★★★★
★★★★★
Nicholas J T - September 2, 2023
Verified Purchase
Fit grest
Ordered the part, it came quick and fixed the issue.
★★★★★
★★★★★
Enrique M - March 16, 2023
Verified Purchase
Easy to install
The part came in excellent condition and was very easy to install.
★★★★★
★★★★★
Darryl W - August 24, 2021
Verified Purchase
Easy repair done in one minute.
The part arrived within 2 days of ordering. Fit perfectly
★★★★★
★★★★★
Elaine P - March 11, 2020
Verified Purchase
Easy install
Works great
★★★★★
★★★★★
Ralph P - December 25, 2019
Verified Purchase
Solved my problem!
Fits perfectly; easy to install.
★★★★★
★★★★★
Michael G - July 27, 2019
Verified Purchase
Part was a duplite on the assembly...easy to figure out how it fit.
Easily snapped into place
★★★★★
★★★★★
Hugh B - July 20, 2019
Verified Purchase
Tine Pivot Evaluation
Fit perfectly. Exceeded expectations.
★★★★★
★★★★★
Steven D - October 4, 2018
Verified Purchase
Tine Pivot replacement
One of the original Tine Pivots feel off and was destroyed by the drying element. This part was the perfect replacement
★★★★★
★★★★★
Larry E - August 16, 2018
Verified Purchase
great service
The part was easy to track and arrived on time i great condition and it worked perfectly.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wheel assembly falling off x4
Popped damaged/worn wheel assembly off, snapped new ones in. Easy peasy
Broken lower rack wheels, tine pivot, and rail stop clip
Easy, 5 minute repair. Snap off old, snap on new. I looked up on the manufacturer's website and got the replacement part numbers, then ordered on partselect for half the price.
washer arm retainer nut broke on the thread, upper bearing woren out
replaced bearing, seal and the Washer arm retainer nut Easy to do . It took more time to empty the lower tray than installing the new parts. Anybody can do it.Thanks for the fast response and shipment. Jerry
Easy...easy....I first watched YouTube videos on how to fix our problem. We replaced both tracks and also the rack adjuster on both sides of the rack. The entire repair took about an hour and most of that time was spent finding the tools at our house!! I ordered the parts on a Sunday evening and they were at our house on Tuesday!!!
... Read moreWill use this sight again if repairs are needed.
I looked at the position of the remaining Tine Pivot, since there are four on this dishwasher upper rack, and positioned the replacement pivot and pressed it into place. It was a snap (excuse the pun!). NOTE: My dishwasher's Model Number was not in the list provided herein. I had to search a couple of models to find the Upper Rack that lo
... Read moreoked like ours and to find the Tine Pivot replacement part that looked like ours.That process took longer than the "repair".
Read less
LOUIS from RAYNE, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tines on top rack of dishwasher would not stay up
simple...a female did it!! Dealing with PartSelect was so easy...your was the only web site that made it super easy to find my part. Placed order and paid for it...part arrived the next day!! Sent web site link to hubby too. When we need parts again for any applicance in our home, we will check your site out first!!
Sandra from Nottingham, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
15 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A bracket was missing on the top rack of dishwasher
Easy. Part just snapped in and took all of about a minute. Now the top rack doe snot slide back and forth.
Carol from Scottsdale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
February 21, 2019
I need a clip for the right side facing the dishwasher. This part number appears to be for the left side . How do i get the part number for the right side? Thanks
Hello Tim, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Janet
November 11, 2021
I need the tine divot for the right side of my dishwasher, but this one that I received is for the left side. I don't see a designation on your parts list.
For model number KDTE334DSS0
Hi Janet,
Thank you for your question. There is one other clip listed for your upper dishrack. The part number listed under your model number for the non-flip dishrack clip is PS11746225. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. If this is not the part that you are looking for, you will need to contact the manufacturer. We hope this helps! If you have any questions, please let us know.
It looks like a Tine Bracket and it has come off my Dishwasher. How do I reinstall it? Where does it go?
For model number W10752618-GN
Hi Anthony, thank you for reaching out. We have attached a video for the installation of your part. It may not be the exact same module but it should install almost the same. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 4, 2020
How do i install the tine pivot?
For model number KDTM354ESS2
Hello and thank you for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?v=I-Koizat7Os&feature=emb_title
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
December 11, 2017
My manual calls this item "sure-hold" light item clips. Is this the correct replacement item?
For model number KUDK03CTBL0
Hello John, Thank you for the question. These would be the same type of parts but this clip is not for the model number provided. The Clip for your appliance model number is Part Number: PS11746241. Good luck with the repair!
Hello, just noticed my old upper rack has no wheels and the new adjuster kit has wheels. How does the rack go on the new tracks? Confused.
For model number KDFE304DWH0
Hello Fred, Thank you for the question. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11756150 for the Dishwasher Upper Rack Adjuster. There are no wheels on the Adjuster for this model and do not show a new adjuster kit for this model that requires wheels. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!