This is a speed lamp clip, and may also be known as the water line spring clamp. It is used in conjunction with your refrigerator. If you have a leak at your fill tub, this part may be the reason. The function of this clip is to keep the fill tube and the water line connected. This will allow water to flow freely without leakage into your water/ice dispensers. This part is quite small, with less than a half-inch in outer diameter. The clip is an off-black, almost olive color, and is rounded.
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No ice in ice maker
Turn water and refrigerator off, use hair to thaw the ice maker filler tube, then remove the filler tube inside the freezer. Next remove the water supply line cover plate in back of the refrigerator. Now remove the speed clip at the white pvc elbow and pull out the supply line. Next, grasp the pvc elbow with pliers and pull hard to rem
... Read moreove. The new filler tube is a 1 piece design (filler tube and elbow combined) and needs to be cut to the proper length. Mark it inside the freezer, remove it and cut to length. Now coat the outside flange with caulk or PU glue and snap into the opening. Put the speed clip on the elbow first and center it. Ensure that the spreader insert is in place in the plastic tube, then slide the supply line into the elbow untill completely engaged. Replace cover.
Removed two screws that held cover plate. remove cover plate. Remove water hose, and clamp, by compressing clamp with pliers. Remove fill tube by pulling HARD, from back.
Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp. Replace cover and screws.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Angela
February 12, 2019
I am looking for answers to the leak i have in my KitchenAid 5th wheel rv residential refrigerator. I have not found an instruction manual to help me with my issue.The icemaker has begun to form a single icicle coming from the front right of the ice tray. water also will fall into the ice tub and freeze. once the lever is pushed up to turn off the ice maker, no more water leaks out.
how do i fix this and what part(s) do i need. and can i get an "installation" manual somehow?
thank you
angela
For model number KBFS20ECMS
Hi Angela,
Thank you for your question. Here is a link to website where you may view the owner's manual for your refrigerator, https://www.manualslib.com/products/Kitchenaid-Kbfs20ecms-3693372.html. If there is awater leaking from your refrigerator, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the p-trap drain tube, the water tube connector, the speed clamp clip, the elbow fill tube, the water filter, the water inlet valve and the micro switch. I hope this helps. Thank you and have a great day!
