Installation videos
11741733-1-M-Whirlpool-WP3412D024-26-Sealed Burner Cap with Electrode
Maytag/Maytag_Thumb/42431.gif
See part 1 in the diagram
Replacing your Maytag Range Sealed Burner Cap with Electrode play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Sealed Burner Cap with Electrode

★★★★★
★★★★★
6 Reviews

Rated by 27 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 66.41   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 24MA-7CKXWV8!
 Fits your 24MA-7CKXWV8!
PartSelect Number PS11741733
Manufacturer Part Number WP3412D024-26
Manufactured by Whirlpool
Product Description

Sealed Burner Cap with Electrode Specifications

This burner cap assembly is sold with the spark electrode igniter and has a 7-inch outer diameter. This manufacturer-approved surface burner is for gas ranges. The surface burner supplies the heat to a cooking area on the cooktop. You may need to replace your burner cap if the gas igniter glows but will ignite the flame, the range will not start, or if you can smell gas. Because a faulty burner cap could lead to a house fire, it is recommended that you replace this part as soon as you realize it is faulty. Remember to unplug the range, turn off the gas, and let the unit cool down before starting this installation. Note: this part has been redesigned and no longer requires a gasket, and is sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Will Not Start | Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Maytag, Magic Chef, Jenn-Air, Hardwick.
Part# WP3412D024-26 replaces these:
AP6008593, 12500051, 12500099, 3412D015-14, 3412D016-14, 3412D017-14, 3412D017-26, 3412D018-26, 3412D024-26, 3412D025-26, 74003965, 74007309, WP3412D024-26VP
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
August 21, 2017
Narrative for this part says 7"diameter. Grid is slightly under 4", which seems to be the correct figure for my part (range # prg5715bdw). Comment?
For model number PS11741733 (part #)
Hi William, Thank you for contacting us. Where this part is coming up under your model number it is designed to work for your appliance and it is the correct part. I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Walt
October 1, 2017
Replacement igniter and gasket on under burner.
For model number CHG9800BAE
Hello Walt, thank you for contacting us. Yes, this is the correct part for your model. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Wallenstein
October 15, 2019
Hi, I require the complete set of four (4) burners for my Maytag gas cooktop model number csg7000cae. Can you confirm availability and cost.
For model number CSG7000CAE
Hello Wallenstein, thank you for inquiring. You will need four of these Sealed Burner Caps with Electrode, part number PS11741733 for your model. The price and availability is listed next to the "Add to Cart" button in the part description. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
David
January 3, 2020
There are two sets of burners, front right and rear left are higher btu's, are there different replacement parts and is the gasket no longer necessary ?
For model number 3468VVV
Hello David, Thank you for the question. The Gaskets have been discontinued and no longer needed when the Sealed Burner Cap are replaced. If you need a new gasket you will need to replace the Sealed Burner Cap. PartSelect Number PS11741733 is for both size burners. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Sealed Burner Cap with Electrode
$66.41

  In Stock
Mickey
October 17, 2019
None of the stove top burners will ignite from the spark igniter. Is there a central module controlling these spark units or do i have to replace all four burners?
For model number FCG20510W
Hi Mickey, there is the Flat Style Oven Igniter Kit part number PS1573892. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Rita
December 26, 2022
Two burners were easy to replace - twist off and twist on. But two are stuck on and won’t budge. Is there a tool that can wrench them off? Like a plumbers tool for stuck faucets?
For model number 31213
Hi Rita, thank you for contacting us. Mix water and baking soda to create a paste. Apply a thin layer of the paste to the burner heads and caps. Allow them 15-30 minutes. This may take repeated applications. Use a toothbrush or scrub brush to clean and attempt to remove it. We hope this information helps!

Was this helpful?
Thank you for voting!
Back to Top
Part Videos

Replacing your Maytag Range Sealed Burner Cap with Electrode

Replacing your Maytag Range Sealed Burner Cap with Electrode play video
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 27 reviews. What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A burner wouldn't spark strongly enough to light the gas.
Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the gasket under the burner has disintegrated, don't worry about it. They don't offer replacements for them because they're not necessary as a safety feature. They were designed to keep overspills from running under the cooktop, but the ridge around the hole is likely higher than you'd ever need.
  • Matthew from Brookfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
164 of 180 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner Was Worn Out
Burner head arrived when I got home from work. Just timely to cook for dinner that monday night, got the 4 burners disconnect the element from the old burner, then connect element to the new bunners, in less than 10 mins, and I had save estimate $600 buying a brand new stove or gas range, this will last me another5 to 10 years. Especially this time of recession
  • arnold from la punte, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
30 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusted sealed burner
The burner rusted after years of spaghetti pots boiling over. When I went to twist the the burner to remove it the top portion broke off. This left the bottom side of the burner stuck into the cook-top. I put some 3-in-1 oil on the rusted rim for a day or two. I had to drill the phillips head screw and twist it with a vise grip. I used a pair of pliers to grab the center of the broken-off burner part. After a few tries it broke loose and was out. The rest was easy. I recommend sealing the rim between the burner and the cook-top. I used silicone sealant. This should keep the water from leaking underneath the burner and into the cook-top.
Other Parts Used:
Screw
  • John from Rockaway, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
19 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would not light and the flame would come out from the bottom of the burner.
A quarter turn counter-clockewise and the burner came out. Disconnect the old wires and connect the new wires. Place the burner in its place and a quarter turn clockwise and it was set.
  • juan from aurora, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner replacement and gas supply replacement
Unscrewed burners (1/4 turn and pop out) then removed set screws, opened top of range. Used 1/2" wrench to remove gas pressure fittings, popped new ones in, replaced wires. Placed top down and then put screws in to minimze movement of tubes.
Other Parts Used:
USE WPL 5787M053-60 Burner Orifice Fitting Assembly - Right Side
  • Andrew from Framingham, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench set
12 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Units were ready to replace
Disconnected the burner cap, unscrewed the drip bowl screws (2), removed the drip bowls, installed the new bowls and reconnected the burner cap. I intended to replace all four drip bowls but two of them came with large chips on the edges. I plan to purchase two replacements soon.
Other Parts Used:
Drip Bowl
  • LEVI from LOMPOC, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner didn't self ignite or control flame
The burners turn and lift. I replaced two. One turned very easily, the other was stuck so I used liquid wrench and plumbers pliers. I did get it off. Once off, the old wires slipped right off and onto the new burners. Those twisted on very easily. Good as new easy breezy.
  • Geoffrey from Columbus, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would not ignite flame...Had to start with match.
Removed the old burners with a Plumbing Pipe Wrench by turning 1/4 turn counter clockwise. Disconnected (2) wires and replaced with new Sealed Burners. The simmer burner wires were slightly diffrent from the original but they do fit by opening the connector with screwdriver and then clamping once wire inserted.
  • Richard from Los Angeles, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old burner that didn't light and was burning poorly
I used a pipe wrench to turn the old burner off and removed the crumbling washer underneath- no need to replace this. I took off the 2 wires, crimped them onto the new burner, twisted it back into place and presto- all fixed!
  • John from Ridgefield Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We live near the pacific ocean - the air is "caustic" from the salt. The burner was rusting out. and the flame was uneven.
The repair was a no brainer - twist to release the old burner - disconnect the spark wires. connect the spark wires on the new unit - drop it in and twist to lock - about 2 minute job
  • Dimitri from Cambria, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
5.0
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David S - April 28, 2021
  Verified Purchase
Good service.
Good service. Knowledgeable sales person. Fast shipping. Thank you. Would readily recommend your service.
★★★★★
★★★★★
MERLE B - February 18, 2021
  Verified Purchase
Easy Repairs
I actually ordered 2 burners. The regular burner went straight forward. That is, male and female wire attachments were all the same size. The power burner required a larger female part to be installed, since the male part came larger. I did have this part, so needed to cut off the old one with wire cutters and crimp on the new larger one. Time for all of this= 45 minutes All of this was completed once I unplugged the power cord from the outlet for safety. Thanks!
★★★★★
★★★★★
Susan K - January 8, 2021
  Verified Purchase
Fred
The burners are a great replacement part for the stove. They only work on three of the burners. The left rear burner is wired differently so it would not work on that one.
★★★★★
★★★★★
William B - January 5, 2020
  Verified Purchase
Easy repair
We bought 2 of these. They came quickly and were SO easy to replace. Hubby was done in less than a half hour with repairing both burners..
★★★★★
★★★★★
Marlene B - May 6, 2019
  Verified Purchase
it didn't fit burner that needed replacement but Bill switched it to another burner where it fit and used that burner.
The part arrived promptly and was in good condition
★★★★★
★★★★★
Thomas N - March 7, 2018
  Verified Purchase
Replaced burner cap with ease
Delivery was excellent. Part was very easy to replace. My wife is happy!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741733
Manufacturer Part Number: WP3412D024-26
Brand
Model Number
Description
Magic Chef
24MA-7CKXWV8
Microwave Oven Combo - Gas
Magic Chef
24MN-7CKXWV8
Microwave Oven Combo - Gas
Magic Chef
3115PUV
Range - Gas
Magic Chef
31203PAV
Range - Freestanding, Gas
Magic Chef
31213WAV
Range - Gas
Magic Chef
3127WTV
Range - Freestanding, Gas
Magic Chef
31315VAV
Range - Gas
Magic Chef
31315VBV
Range - Gas
Magic Chef
31315WAV
Range - Gas
Magic Chef
3167VTV
Range - Freestanding, Gas
Magic Chef
3167VUV
Range
Magic Chef
3187VRV
Range - Gas
Magic Chef
3187VTV
Range - Gas
Magic Chef
3187VUV
Range - Gas
Magic Chef
32315VAV
Range - Gas
Magic Chef
3468VRV
Range - Gas
Magic Chef
3468VTV
Range - Gas
Magic Chef
3468VVV
Range - Gas
Magic Chef
3488VRV
Range - Gas
Magic Chef
3488VTV
Range - Gas
Magic Chef
3488VVS-N
Range - Gas
Magic Chef
3488VVV
Range - Freestanding, Gas
Magic Chef
34MA-3TKVW-EV
Range - Gas
Magic Chef
34MA-5TKVW-EV
Range - Gas
Magic Chef
34MN-3TKVW-EV
Range - Gas
Magic Chef
34MN-5TKVW-EV
Range - Gas
Magic Chef
6498VRV
Range - Freestanding, Gas
Magic Chef
6498VTV
Range - Freestanding, Gas
Magic Chef
6498VVV
Range - Freestanding, Gas
Magic Chef
68-2534-40
Range - GAS RANGE
Back to Top

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Sealed Burner Cap with Electrode
$ 66.41   In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.

Close