Models > 3115PUV

3115PUV Magic Chef Range - Overview

Sections of the 3115PUV

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter Kit – Part Number: 12400035
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(49)
PartSelect #: PS1573892
Manufacturer #: 12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both ...
$52.15
  In Stock
Sealed Burner Cap with Electrode – Part Number: WP3412D024-26
Sealed Burner Cap with Electrode
★★★★★
★★★★★
(6)
PartSelect #: PS11741733
Manufacturer #: WP3412D024-26
This burner cap assembly is sold with the spark electrode igniter and has a 7-inch outer diameter. This manufacturer-approved surface burner is for gas ranges. The surface burner supplies the heat to ...
$66.41
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$19.99
  In Stock
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(20)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
This is a replacement oven rack and it is designed for use with ranges and ovens. This is a genuine OEM replacement part. The rack provides a level and stable surface for cookware inside of your appli...
$76.85
  In Stock
Screw - 10-16 x 1 – Part Number: WP3387230
Screw - 10-16 x 1
★★★★★
★★★★★
(2)
PartSelect #: PS11741409
Manufacturer #: WP3387230
This screw is sold individually.
$7.76
  In Stock
Screw – Part Number: WPW10348409
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS11753384
Manufacturer #: WPW10348409
Sold individually.
$7.76
  In Stock
Door Seal – Part Number: WP7212P043-60
Door Seal
★★★★★
★★★★★
(5)
PartSelect #: PS11743947
Manufacturer #: WP7212P043-60
This door seal is used for ranges and ovens. The seal prevents hot air escaping from the oven to maintain a certain temperature when baking. The clips sticking out of the seal help secure it to the ra...
$56.86
  In Stock
Spark Module - Surface Burners – Part Number: 12001596
Spark Module - Surface Burners
★★★★★
★★★★★
(10)
PartSelect #: PS2003170
Manufacturer #: 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$60.64
  In Stock
Burner Orifice Fitting Assembly – Part Number: WP5187M026-60
Burner Orifice Fitting Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS11742792
Manufacturer #: WP5187M026-60
This orifice fitting assembly is sixteen inches long and is made entirely of metal.
$71.32
  In Stock
Anti-Tip Bracket – Part Number: WP3801F656-51
Anti-Tip Bracket
★★★★★
★★★★★
(1)
PartSelect #: PS11741944
Manufacturer #: WP3801F656-51
Sold individually.
$9.44
  In Stock
Stand Mixer Screw – Part Number: WP4159193
Stand Mixer Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$8.72
  In Stock
Screw – Part Number: WP98008545
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11747488
Manufacturer #: WP98008545
Sold Individually.
$8.08
  In Stock

Questions And Answers for 3115PUV

Be the first to ask our experts a question about this model!

Common Symptoms of the 3115PUV

[Viewing 8 of 8]
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Gas smell
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would not work but the Broiler did
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don't rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.
Parts Used:
Flat Style Oven Igniter Kit
  • James from Ferndale, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
332 of 362 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A burner wouldn't spark strongly enough to light the gas.
Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the gasket under the burner has disintegrated, don't worry about it. They don't offer replacements for them because they're not necessary as a safety feature. They were designed to keep overspills from running under the cooktop, but the ridge around the hole is likely higher than you'd ever need.
Parts Used:
Sealed Burner Cap with Electrode
  • Matthew from Brookfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
163 of 178 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would'nt light
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The new igniter took only 45 minutes to install and supply's 3.6 A/C volts to the gas valve and the oven works fine.
Parts Used:
Flat Style Oven Igniter Kit
  • Charles from Charlestown, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
128 of 139 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!