Bleach Dispenser - White WP3362952 | Official Whirlpool Part | Fast Shipping | PartSelect
Our response to COVID-19
We're open and continuing to ship packages. Learn about our response to COVID-19
Bleach Dispenser - White – Part Number: WP3362952
Bleach Dispenser - White – Part Number: WP3362952 Bleach Dispenser - White – Part Number: WP3362952 Bleach Dispenser - White – Part Number: WP3362952 https://partselectcom.azureedge.net/Schematics/Maytag/ZZS5T9I6.gif

Bleach Dispenser - White

PartSelect Number PS11741235

Manufacturer Part Number WP3362952

Manufactured by Whirlpool

Product Description

Bleach Dispenser - White Specifications

This part holds the bleach until it is ready to be released into the cycle.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part works with the following products:

Washer, Washer Dryer Combo.

This part works with the following brands:

Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Amana, Maytag, Crosley, Admiral, Magic Chef.

Part # WP3362952 replaces these:

3362952, 387028, 387029, 63289, 63401, 63402, 63405, WP3362952VP.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Whirlpool Washer Bleach Dispenser - White

Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 14 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
RICHARD from PHILA, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Parts Used:
WPW10250667, WP3363394, WP3362952
Replace Water Pump Coupling
Removed casing tip over washer disconnected water pump. Disconnected motor then replace coupling then reassemble motor then replaced water pump.
809 of 867 people found this instruction helpful.
Was this instruction helpful to you?
Juan from Frisco, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP3362952, WP53-0918
Parts replacement
Changing the parts was easy.
41 of 1286 people found this instruction helpful.
Was this instruction helpful to you?
Nick from Castro Valley, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
WPW10072840, WP3951608, WP3949550, WP3362952, 285809
Agitator slipping
Removed bolt in center of agitator then slid agitator straight up and out replaced the dogs and the other parts that came with the cam kit i also replaced a few of the other parts that wear in the agitator ,you can actually re-cut the teeth on the dogs with a razor so that they will work again ,but new parts are very reasonably priced and the parts arrived very quickly the next day .
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Becky from Oskaloosa, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
80040, WP3952374, WP3363892, WP3362952, 285809
pump leaking, agitator not turning
First I went to this site and read what everyone had to say on leaking pumps. After finding the model number, I looked at the parts list, and found what parts I thought I would need. First I shut off the water and unpluged the washer Replacing the water pump was very easy after reading what other people had done. I pulled the washer out from the wall about 18 inches and tilted back on a 45 degree angle. The pump was now in plain sight and helt in with two slide clamps. Using a pair of plyers I remover both clamps from both hoses on the pump. By pushing to the outside of the pump I was able to remove both of the slide clamps. This allows the pump to be lifted out and off the motor shaft. As my washer had just started leaking " about one week" the pump slid off the shaft easy. There was no rust on shaft. Pump shaft has a slot in it so the pump can only go on one way. By reversing the way I removed the pump I was able to slide the new pump back onto the shaft and slide the slip clamps back over the pump. Replacing both hoses and both clamps. Now pump was in place. I pulled the washer away from the wall and slid back into place. That took care of the pump. For the top side I removed the top part of the agitator by pulling up and removing the part that holds the softner. Under this was a piece of plastic that I was able to lift out. Under that was a 12MM bolt with a rubber washer. Using a scoket set I removed the bolt and washer. Lifting up on the agitator it came right out. Pulling on each end of the agitator I was able to pull it apart. Inside was a large plastic washer and agitator directional cogs all in one piece. This piece just lifts up and off. I replaced the old piece with the new on and slid the two agitator back togeather. Setting the agitator back into the washer and put the 12mm bold and rubber washer back on. Then I put the plastic back on and set the top softer cup back in place. Snapping in the bleach dispenser was very easy, just shap into place. Pluging the washer back in, and turning back on the water I ran the washer with no clothes in it so I could check for leaks and make sure everthing was working. Repairing both parts took about 30 minutes and now the washer is like new.
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Tammy from Elgin, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP3364291, WP3362952
Knob Broke
Ordered part and within 2 days it arrived. Removed broken knob and twisted new one on. Awesome job getting the part to me so fast. Thank you!
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
ARTHUR from FT HUACHUCA, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
WP3362952, 285811, W10820044
Noticed agitator wasnt moving during wash and rinse cycles. Prior to repair no strange smell or noises
Went online to Parts Select and typed in Model #. Looked thru repair help and found very simular problems. I did disassemble the upper prtion of the aggitator by removing softner dispenser. Once inside I used a shoe string and routed it thru the two handles on the plastic cover and pulled up moderately, exposing the cam and doggs. I used a 7/16" socket on a 6" xtension to reach the mounting bolt. Slowly turn bolt counter-clockwise holding the lower agitator. Once the mounting bolt was out I temporarily replaced the plastic cover. I pulled up on the UPPER agitator to completely remove it from the tub. Once set on a firm surface I again pulled out the plastic cover ,bolt and cam cover, exposing the cam and dogs. I shook them out. I replaced everything with what was included in the agitator repair kit ( great kit). Everything for assembly is as the instructions state and totaly a reverse process. Take care not to over tighten the bolt. I did take this oppurtunity to clean the tub and agitators. I did also remove the lower agitator to clean the area. Thanks Parts Select!
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Sainte Marie, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP3362952
Bleach dispenser broken
After 3 years of hard daily use, the small feet that hold the Bleach dispenser in place broke off. The new dispenser was easy to snap into place and now the washer is good as new.
1 person found this instruction helpful.
Was this instruction helpful to you?
Steve from Henderson, TX
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
285753A, WP3362952
Drive coupling broke. Motor not turning transmission.
Tipped onto side to access from bottom. Removed motor and replaced drive coupling between motor and gearbox. Do not turn machine completely upside down as gearbox oil will leak out of vent hole in transmission.
1 person found this instruction helpful.
Was this instruction helpful to you?
Michael from Bakersfield, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10074580, WP358237, WP3362952, WP3355758, 285811, 285587
Repair went well!!!
Repairs went well.....it took less than 10 mins...just followed picture diagram....and test....and it worked well>>>.
1 person found this instruction helpful.
Was this instruction helpful to you?
Neal from BRADENTON, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP3362952
Broken anchor piece
Installed long end first and snapped it into place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
4 Reviews
4
out of 5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741235
Manufacturer Part Number: WP3362952
Brand
Model Number
Description
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11016512690
Washer
Kenmore
11016512691
Washer
Kenmore
11016512692
Washer
Kenmore
11016602690
Washer
Kenmore
11016602691
Washer
Kenmore
11016602692
Washer
Kenmore
11016602693
Washer
Kenmore
11016611690
Washer
Kenmore
11016611691
Washer
Kenmore
11016611692
Washer
Kenmore
11016612690
Washer
Kenmore
11016612691
Washer
Kenmore
11016612692
Washer
Kenmore
11016732500
Washer
Kenmore
11016812500
Washer
Kenmore
11016812501
Washer