This timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
Part# WP33001730 replaces these:
33001730
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Susan H - May 19, 2022
Verified Purchase
Fairly easy to repair
The part arrived on great condition, took a bit lnger to get that I expected. Looked online for installation instructions, was fairly easy to install. It did take two of us to install on our 25 year old Matytag dryer.
★★★★★
★★★★★
Norman R - March 31, 2020
Verified Purchase
Recieved the exact part I replaced.
There were two numbers called out for my model. I called and was they were able to tell me the correct number for my serial number. I replaced the part and we are up and running!
★★★★★
★★★★★
Jere N - July 31, 2018
Verified Purchase
Very easy fix on dryer repair, thanks to Partselect
My son and I diagnosed our dryer issue, not heating/drying wet clothes. Simply ordered timer and changed out in short order, works like new now.
★★★★★
★★★★★
Len G - April 10, 2018
Verified Purchase
Great part. Perfect fit. No issues.
The timer and lint filter were both a perfect fit. Replaced both in less than an hour.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Intermittent operation.
Removed the old timer and installed the new one. Easy to install with a screwdriver and common sense.........
David from MERIDIAN, OK
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not heat
My husband did the repair - first appliance repair he has done in 37 years of marriage and it was EASY!!!! Ordering was a breeze - part arrived more quickly than appliance repair company could provide it. Saved over $100 ordering from this site and doing ourselves. Directions provided from site were spot on perfect!
Mary from Memphis, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not start at times intermitant on off
called electrian breaker had a slight burn spot on the contact. I was very impressed by your company getting the parts to me so quickly. I'm sorry that I have to return them because the repair would have been much cheaper. Thank you
STANLEY from PLYMOUTH, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heater Stop Working!
Checked all other electrical and mechanical operations and all seemed operational. Removed heating element from unit and checked with vom. It was ok. Reinstalled and began checking wiring with vom per the diagram in the control panel cover. Determined that the contacts for the heater in the timer unit had failed. (Open) temporar
... Read moreily shorted these points on the timer with a strap to make the dryer work. Wife is now happy. Two days later when the timer part arrived, installed and now all is operational. Good for another 10 years. Dick
Read less
Richard from Long Valley, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer would not cool down in the permenant press cycle or any other cycle.
Pull the electric plug. With a nut driver and phillips screw driver remove two bolts and three screws on the rear access plate. Gently pull the knob from the front pannel and with the nut driver remove the two bolts under the knob. The timer is now loose from the drver. Match the wire plug codes on the old and new timers. Remove one wire
... Read moreat a time from the old timer with pliers and plug it onto the new timer on the same coded pin. Slide the timer back into the pannel and replace the two bolts that hold it. Replace the knob. Replace the three screws and two bolts holding the back pannel. Plug the electric cord back into the wall socket.
Read less
george from camden, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
14 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sam
August 21, 2017
Dryer will not turn off at end of cycle. Timer know goes past the stop postion and keeps running. Please recommend the correct timer replacement part. Thanks
For model number Maytag Neptune Dryer MDG4000BWQ
Hi Sam,
Thank you for your inquiry. If the dryer is not shutting off once a cycle is complete, there are some parts that may fix the issue. You will have to check the internal-bias thermostat, the door switch, the timer, the timer knob, the door catch kit, the m series new style coil kit, the radiant flame sensor, the cycling thermostat and the drum support rollers. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gregory
September 13, 2019
My wife told me the other day the dryer was making "popping" sounds. Yesterday when she went to get the clothes from drying overnight they were still damp and the cycle knob was still half way through the cycle. What could be wrong?
For model number LDE9806ACE
Good Day Gregory. Thank you for your question in regards to your unit (Model Number LDE9806ACE) Based on our research you may need to replace one or more of the following parts: 1) High Limit Thermostat-Limit: 200-30 (PartSelect Number PS11740647). 2) Heating Element - 240V (PartSelect Number PS11740682). 3) Blower Wheel with Clamp (PartSelect Number PS2200270). 4) Thermal Fuse (PartSelect Number PS11740687). 5) Heating Element - 240V (PartSelect Number PS11757530). 6) Thermal Fuse-Limit: 183 (PartSelect Number PS11740678). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Dryer-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"WP33001730","title":"WP33001730","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
