Maytag/Maytag_Thumb/CW19-38.gif
See part 005 in the diagram
Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Remote Style Pump with Motor - 120V 80W

★★★★★
★★★★★
1 Review
$135.59   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11739411
Manufacturer Part Number WP22003059
Manufactured by Whirlpool
Product Description

Remote Style Pump with Motor - 120V 80W Specifications

This remote style pump and motor assembly with check valve is used for some washing machines. The motor attached to this pump carries 120 volts and 60 hertz.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Pumps but will not spin | Noisy
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag.
Part# WP22003059 replaces these:
AP6006338, 22001982, 22002550, 22002794, 22002939, 22003059
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W

Replacing your Maytag Washer Remote Style Pump with Motor - 120V 80W play video
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 20 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washer not draining
Unplug washer, turn off water, disconnect supply hoses.
Drain washer by removing the one screw holding the hose on the bottom rear of the washer, drop the hose to the floor and let it drain (you may want to take washer outside)
Remove four screws holding rear panel
Locate the pump and disconnect the two wires. Wires can be attached to either terminal when reinstalling, orientation is not important.
Using 5/16 driver, loosen the hose clamps on the inlet and outlet pump hoses then remove hoses from pump.
Twist the pump counter clockwise then pull straight up to remove.
  • Timothy from Bremerton, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WP22003059
61 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the water drain pump started to make grinding noises and poor draining
the repairs couldn't be easier, the pump came right out. just loosen the two water drain hoses and out it came. the intallation was just as easy...
  • carlos from rio rancho, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WP22003059, WP22002263
21 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
change stuck in drain pump, damaged the motor
just replaces the pump , the replacement pump was a little different than OE , mounting bracket different but was able to remove housing and bracket from broke pump and put on new pump , all works fine
  • gordon from indianapolis, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    WP22003059
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It went like butter
it's best to pull off the back of washer then it is too go through the front thats my only hint
  • Charnell from Tacoma, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP22003059
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not spin the water out of machine.
The pump motor was making quite a chattering noise about 2 months before it totally quit, Ordered part it was shipped very fast.(before the next wash day). Took the back off remove 2 hoses and 2 wires installed new motor. Very easy job and it is working very quite and great.
  • Benny from Shelbiana, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP22003059
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pump would not empty the washer.
I had taken the back off the washer already. The pump was connected to an incoming fitting and the out going fitting with hose clamps. Removed the hose and hose clamps from the old pump, connected the hose and hose clamps to the new pump, reconnected the wiring and that was about it. The pump was mounted to the bottom panel of the washer by simply plastic plugs requiring no tools. It was very easy.
  • Wilson from Logansport, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP22003059
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bad pump
I took off the rear panel and removed the hose clamps and electrical terminals, slid pump out of slot in bottom pan of washing machine. It only took minutes, this was part of a major overhaul. I replaced this as a precautionary measure. Great prices and quick service,
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not pump out water
I have a new Matag repairman, my husband. He took the front panel off by removing the screws. Then removed the balance on the drum and found the pump. Put the new one on and put everything back and my washer runs better than it has in a long time. Saved us a service call and hourly rate for a service man that couldn't come for 4 days.
  • Linda from Sunbury, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP22003059
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine had been making a howling noise during rinse cycles for several weeks and then suddenly stopped draining.
On-line trouble shooting sites indicated that drain pump was likely culprit. Disconnected pump from hoses and removed and replaced pump. Tub to pump hose had considerable scale in it, so replaced that too. Repair was made easier by removing both the front and back panels of the washer to get best access to hose clamps and pump.
  • Todd from Anchorage, AK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
  • Parts Used:
    WP22003262, WP22003059
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not pump out water
I removed the pump and found several coins had damaged the prop blade. I ordered a new one and installed it easily. The intake on the new pump was slightly smaller than the original so the original quick clamp produced a leak. A simple manual hose clamp corrected that problem.
  • Joella from Parkville, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
  • Parts Used:
    WP22003059
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11739411
      Manufacturer Part Number: WP22003059
      Brand
      Model Number
      Description
      Maytag
      MAH14PDAAL
      Washer - Commercial
      Maytag
      MAH14PDAAQ
      Washer
      Maytag
      MAH14PDAAW
      Washer - Commercial
      Maytag
      MAH14PDABL
      Washer - Commercial
      Maytag
      MAH14PDABW
      Washer - Commercial
      Maytag
      MAH14PDCBQ
      Washer
      Maytag
      MAH14PDCBW
      Washer
      Maytag
      MAH14PDDWW
      Washer
      Maytag
      MAH14PNAWW
      Washer
      Maytag
      MAH14PRAWW
      Washer
      Maytag
      MAH14PSAAW
      Washer - Commercial
      Maytag
      MAH20PDAWQ
      Washer
      Maytag
      MAH20PDAWW
      Washer - Commercial
      Maytag
      MAH20PDCXQ
      Washer
      Maytag
      MAH20PDCXW
      Washer
      Maytag
      MAH20PNAWW
      Washer
      Maytag
      MAH20PRAWW
      Washer
      Maytag
      MAH20PRDWW
      Washer
      Maytag
      MAH20PSAWW
      Washer
      Maytag
      MAH3000AKW
      Washer - Residential
      Maytag
      MAH3000AWA
      Washer - Residential
      Maytag
      MAH3000AWQ
      Washer - Residential
      Maytag
      MAH3000AWW
      Washer - Residential
      Maytag
      MAH4000AWQ
      Washer - Residential
      Maytag
      MAH4000AWW
      Washer - Residential
      Maytag
      MAH5500AWW
      Washer - Residential
      Maytag
      MHW2000AWW
      Washer Dryer Combo
      Maytag
      MLE19PDAYW
      Washer Dryer Combo
      Maytag
      MLE19PDAZW
      Washer Dryer Combo
      Maytag
      MLE19PDCZW
      Washer Dryer Combo - Electric

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service