The cold water inlet valve on your washing machine dispenses the cold water and bleach into the washer in the prewash cycle. This inlet valve has a standard hose fitting inlet and 2 water outlets facing 45 degrees to the left. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test your valve, unplug the washer when the symptom occurs. If the washer continues to fill, then your inlet valve is defective. This part is approximately 4 inches long x 3 inches wide.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your LG Washer Water Inlet Valve - Cold
Troubleshooting
This part fixes the following symptoms:
Leaking | Water Filling Issues
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 5220FR2075L replaces these:
AP5986564, 5221ER1003A, AGM73269503
Customer Reviews
Average Rating:
★★★★★
★★★★★
77 Reviews
4.9
Filter By Rating:
5 Stars
69
4 Stars
7
3 Stars
0
2 Stars
1
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Angelo M - August 19, 2023
Verified Purchase
Easy repair.
The part was deliver fast and my appliance was back in working order within minutes.
★★★★★
★★★★★
Patrick S - August 17, 2023
Verified Purchase
LG washing machine leaking water
My wife noticed a damp area behind our LG washer. After researching possible causes the cold water inlet valve sounded like the probable cause. I also liked the fact that replacing the valve was an easy project to try and only required a modest investment for the new valve. PartSelect had the valve in stock for a competitive price and also had a video how to that you could use to show exactly how to replace the valve. In about 20 minutes or so the valve was replaced and the washer has been running great. I would highly recommend PartSelect for any home appliance repair.
★★★★★
★★★★★
Hawk S - July 11, 2023
Verified Purchase
Seems to be what I needed to stop the leak.
The part has been working well. Was easy to replace.
★★★★★
★★★★★
Noah R - June 14, 2023
Verified Purchase
Easy repair, no more leaks!!!
I get all my washing machine parts from this site!
★★★★★
★★★★★
Mary Ann H - April 2, 2023
Verified Purchase
Easy Repair
Perfect fit
★★★★★
★★★★★
Daniel R - January 23, 2023
Verified Purchase
right part
I received the part very late
I could not wait 10 days and found a local parts store that had one on the shelf
from when I ordered before it only took a couple of days to get the part
I still have it on my office and would like to return it if possible.
January 23, 2023
Thank you for your review. We will be in touch with you soon regarding how to return the part.
★★★★★
★★★★★
Michael S - November 10, 2022
Verified Purchase
Push the Easy Button!
The exact LG part with the how to video… I was back in business in less than 30 minutes. That was easy!!
★★★★★
★★★★★
Mark L - April 1, 2022
Verified Purchase
Just barely fit
Hose connections were shorter than the original part so I had to stretch the hoses to their max to get it to fit. They were able to fully seat on the connections but it was close.
★★★★★
★★★★★
Cody V - March 23, 2022
Verified Purchase
Super easy to replace!
Part was a perfect fit! And the video of instal instructions attached to the email was an awesome touch!
★★★★★
★★★★★
W E T - January 26, 2022
Verified Purchase
Easy Repair
Took longer to disassemble washer than replace part
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 24 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not fill with water and a (I E) Code displayed on the screen.
I looked at the video that is on the partselect.com website. The person that I talked to from the website was very knowledgeable about the problem with my washer and he gave me the part number to type in the search box of the website. When I typed the part number in the search box the part showed up and the installation video showed up al
... Read moreso. The video is an excellent video. It shows exactly how to do it. I also downloaded the operator manual from the website to look up what the error code meant.
Read less
Manuel from MESILLA PARK, NM
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was collecting in the machine after it finished its cycle.
Turned off hot and cold water supply. Pulled out machine and disconnected hoses, unplugged power.
Unscrewed 4 screws at back top of machine (holding plastic bracket to cover). Pulled out trays from front where detergent is poured, and removed small screws under trays.
Slid cover back and up. This was the only tric
... Read moreky part. There are pegs that must line up with large holes in cover before you can easily lift cover up. Helps to look from underneath and find pegs on each side.
Using pliers, fully open clamps holding hoses to the inlet valves, and carefully pull off hoses while keeping clamps open with pliers… making sure to keep track of which hose goes to each motor. Take a picture of electrical connectors noting color and sequence of connectors on each inlet valve motor. Pull all connectors off.
Unscrew screws holding each inlet valve to machine. Put new inlet valves in place of old, and screw in place. Reconnect hoses (using pliers to hold open clamps, then slide clamps over tubing and inlet valve connector). Reconnect electrical connectors carefulljng lining up colors of wires and sequence using picture taken in previous step.
Replace cover. Screw all screws back to secure cover. Replace trays.
Cold water inlet valve was leaking where solenoid attaches to valve body.
Hardest part of the job was getting the washer away from the wall. :) Disconnect power & water Remove top panel, two screws at back Remove two screws holding valve to washer body Use pliers to loosen and pull back spring clamps on three water tubes Remove tubes by twisting and pulling Reverse process to ins
... Read moretall new valve.
I am convinced that the original valve began leaking because I had heard water hammer for years as that valve opened and closed during operation. I bought two water hammer arrestors (less than $30) that attach inline with the inlet hoses and I think that will prevent the problem from recurring.
Read less
Fredrick from KAYSVILLE, UT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was putting water in tub when it was in the spin cycle
Unpluged -shut off water removed 2 screws on lid,removed lid took 2 screws out holding part on swapped the hoses out and pluged wires in.
John from SOMERSET, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking into washing machine after the washer was shut off
Removed the cover from the washing machine, the two valves(cold & hot) are located in the read top of the machine, removed the hoses to the valves, removed the nut that holds on the valve to the washer and placed new valve into washer and placed the nut back onto new valve, placed the hoses back onto the new valve.
Old cold water inlet was leaking , as it progressively got worse,it poured.
With my wife's help( 2 shoukder surgeries ), pulled it forward, unplugged power source, turned Both water supplies off. Removed two phillip screws from each upper ( plastic) holder. Bumped top from front( works really well if you can use both arms,and with rubber gloves on for traction, or go to harbor freight purchase a glass s
... Read moreuction cup) . I marked ( with a sharpie) the solenoids/hoses,and wires, ( facing front ,right to left,1,2,3.), removed plugs,loosened clamps and pushed them back,gave each hose a twist,and removed them. Took two screws 5/16 from the back that hold the valve assembly in out. Removed old valve assembly, put new in place, reverse procedure for assembly. Once all is hooked up,and water dried, I plugged in,turned water on watched for two cycles( you need not stand over it,if it leaks you will know it) to double check, installed top,and we pushed it back in place. Very simple to do,these washing machines are so easy to work on. Now we enjoy a dry laundry room,and you can to. ??
Read less
Kevin from DENHAM SPGS, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not flowing into the washer
Ordered and replaced the hot and cold inlet valves - followed the instructions off of the video posted on the Part Select website ... completed the repair in less than 10 minutes
Ask our experts a question about this part and we'll get back to you as soon as possible!
24 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derek
February 4, 2018
Will this fit the wm2650hva model?
For model number wm2650hva
Hello Derek, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11728995 for the Cold water and PartSelect Number: PS3527427 for the Hot. Good luck with the repair!
I'm trying to troubleshoot my problem. After running a load of wash, water clears out, no problems. Then if i don't use the washer for a few days, about 3 cups of water fills the washing machine. It's always to aproximatly the same level and it always takes a few days of nonoperation to fill. I'm trying to figure out what to fix.
For model number WM2233HS
Hello Jenna, thank you for your question. This issue could be the water valve itself, that is leaking into the washer after the unit is done its cycles. Its possible the valve is stuck slightly open and is allowing water to come into the tub. Or, the problem might be that water is coming BACK into the unit after its been pumped out. I would recommend checking the drain hoses, and recommendations for how the unit is set up to be sure that the hoses are not kinked, or have moved. Sometimes, if the hoses are not installed properly, water can't get all the way out of the hoses then some comes back in. If the appliance was installed properly, and the hoses are clear, not kinked and set up properly, the issue is probably with the water valve for the appliance. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
David
May 1, 2018
Washer leaking in the front. What do you think is wrong?
For model number WM2016CW/01
Hello David, thank you for your question. The leaking could be coming from one of the water valve, the drain pump, or a hose that has come loose or has cracked or broken. This front load washer also has a large rubber door gasket that can sometimes get ripped and will cause leaking at the front of the unit. I would recommend removing the back panel, and top panel to see if you can locate the leak, then we can provide more information on the parts you would need to fix it! I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Christina
May 16, 2019
The washer continues to fill what is the part number or is this it for the water inlet valve
For model number RTW4516FW2
Hello Christina, thank you for your question. The water valve for this unit is actually PartSelect Number: PS12349269. Please enter the part number into the site for current price and availability. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
November 23, 2019
I just have one solenoid leaking. Can i just replace the solenoid instead of the whole valve?
For model number WM2010CW
Hello Ray and thanks for writing.
Yes, you can if you can find the correct solenoid. We do not carry this part on its own it comes as part of the water inlet valve. We hope this helps. Please contact us anytime.
4 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 25, 2018
I got this part but i made a simple but critical mistake. I disconnected the hoses before i marked them. I see that they attache to main, prewash and bleach but i dont know the order. Can you please tell me which hose goes to which calve? I cant believe i did that. Please help.
For model number 5221ER1003A
Hi David,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install the lines. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Melissa
January 21, 2018
The part we took off had two valves on it the one pictured shows 3 will this part still work with my machine?
For model number WM3570HVA
Hi Melissa,
Thank you for your question. Yes, this water inlet valve will work on your appliance. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jacinta
July 11, 2019
Corrected model# (computer dyslexia!). Should I replace pump and inlet valve if leaking through door bottom? Is one more likely the culprit? Would appreciate if you located correct parts. Thnx.
For model number WM2140C
Hello Jacinta, Thank you for the question. If there is a leak at the door I suggest checking the Door Gasket, PartSelect Number PS3524977 for damage or wear. Hope this helps!
Water is leaking out the top of the inlet valves. If i replace the part is there something, like high water pressure, that i should be concerned about damaging the replacement as well?Thanks
For model number Kenmore 796
Hi Kevin,
Thank you for your question. Before installing the new water inlet valve, you will need to check the water pressure coming from the where it connects to the water inlet valve to make sure the correct amount is coming out. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
July 29, 2019
Washer does not fill with hot or cold water do i need to replace both valves?
For model number WM2240CW
Hello Debbie, thank you for your question. Yes, if neither hot or cold work we would recommend replacing both valves. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
