SGR231CS0 Westinghouse Dryer - Instructions

Removed back panel, unplugged motor and released the belt. Remove top panel then front panel. Remove drum for better access. Vacuum the lint while everything is open. Remove old motor and replace with new motor. Reassemble. Suggest replacing the belt too.

Referred to Video and replaced drum support bearing as shown. Did not solve the problem as noise was still present. Called professional repairman, who replaced the belt pulley, along with all the parts I had just installed (came as part of a total kit). I was on the correct path, but just didn't go far enough to check out the belt pulley. If it should happen again, I could complete the whole repair process. Great learning process!!

Replaced everything on the dryer till I got the right problem, seriously, I now have a new dryer in an old body, still came out alot cheaper than buying a new one. I listened to every sound on youtube but none sounded like my dryer.

I youtube'd the repair, and repaired it! While I was at it I replaced the belt! (Highly recommend replacing the belt while you are replacing the element!) Was a snap!

removed top-removed front-removed belt-removed drum (I didn't know how the drum came out WITH the bearing so I unscrewed the 3 middle screws on the back of the drum which released it from the bearing)- removed the bearing-that was when I knew what to order. installed the bearing on the drum before assembling all in reverse order. I wasn't sure how much grease to use so I used about 1/3 of it.

Had the drum bearing but had never got a round to putting it in we just let it squeek. Then the belt went. Easy enough, whatched the tutorial once and just did it. 35 minutes and back drying.

This repair took about fifteen minutes. I popped the top of the dryer using a flat-blade screwdriver, leaned it back against the back wall, unscrewed two screws holding the front panel, removed the five electrical spade contacts after marking which went where, swung out the panel and lifted it off. After that, it was a simple job to unscrew the plate holding the solenoids in, at the bottom left of the unit. I replaced the solenoids, closed everything up and now the dryer is working better than it has in the last three years, or so. If your dryer is heating sporadically, the odds are 85%, or more, that a solenoid swap-out will correct the problem.

The videos provided on you tube are a tremendous help. I did not know you open the dryer from the front. After that the job is very straight forward. So glad I did it!

I had a main bearing go out. So I decided that since I was going to be in the very back of the dryer I would just rebuild the while unit. Took me under two hours and I replaced every moving part or part that was involved in moving parts and was super easy.

My mother, age 79, had been using a pliers to adjust the settings on her Frigidaire dryer, since the dial was lost years ago. She could never "get it right." I looked on-line and found Part Select (after 1st getting lost on the Frigidaire web-site). Easy to find the part, quick ordering and delivery. My mom's delighted with the easy fix.

Very simple. Pop the top open released the beld from the back it's easier that way the video was very helpful the sound was so bad you can hear it from a few houses down after year of just using it like that I figured I ha d nothing to loose great price great instructions now it sounds just as new.

no tolls required it just slipped on and works fine

I viewed a video online and my repair was as simple as the video showed. Love that I am able to do quick fixes like this! Thanks Partselect.com!

All I did was insert the new one! Service was excellent. I received it in one day!!!

Saw video on YouTube on how to change rear bearing. Followed what I saw and repairs were made with ease. our repair kit included all the parts (new bearing) and everything fit perfect.