Models > S3700E6WW > Instructions

S3700E6WW General Electric Washer - Instructions

All Instructions for the S3700E6WW
541 - 555 of 596
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer agitator wouldn't agitate
remove the agitator by just pulling it up, remove the bolt that hold the agitator coupling down and install the new one.
Parts Used:
Agitator Coupling Kit
  • Jose from Pulaski, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator Would Not Move
Found that the teeth and the agitator coupler hade stripped out. Replaced the coupling and everything worked great. 10 Min and $10. 00 Fixed it up.
Parts Used:
Agitator Coupling Kit
  • TIMOTHY from KANSAS CITY, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
beyond belief!!
After ordering the part on a Friday afternoon, I was amazed to have it delivered before 2PM the next day. The part was the timer knob and it was a perfect fit. It took less than 15 minutes to replace the faulty knob with the brand new one. Amazing!!!
Parts Used:
Timer Knob
  • Hilda from harpswell, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Agitator would not turn, dampening strap broken, timer knob striped.
Pulled front panel off to replace the dampening strap, removed knob clip to release timer knob, removed agitator from inside drum and replaced coupler.
Parts Used:
Agitator Coupling Kit Tub Dampening Strap Timer Knob
  • Michael from Nashville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
Timer Knob Replacement
Unplug appliance. Use needle nosed pliers to remove clip from behind the knob. Remove knob and replace with new knob. Push in to install the new knob until you hear the "click." There you have it. Easy. Another task completed from the "Honey-Do" list.
Parts Used:
Timer Knob
  • Anthony from Moreno Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
needed a new knob for my dryer
All I did was stick the knob on. How easy was that! Knob works every time. Very pleased with the part.
Parts Used:
Knob and Clip
  • Diane from Johnson Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wouldnt agitate
Took off old agitator, removed coupling that was bad and put new one on.
Parts Used:
Agitator Coupling Kit
  • Shawna from LaCenter, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
knob stripped
needle nose pliers to pull out old tab behind old knob. simply pop new knob on when you remove old. video gave me self confidence to do it myself.
Parts Used:
Timer Knob
  • sandra from north windham, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Agitator not working
Pulled off agitator with little effort. One 7/16 bolt to remove and the coupler came right off. Pushed on new coupler, replaced with new provided bolt, pushed agitator back on and was back in business!! Very simple inexpensive repair. Thanks Partsselect for your quick parts turnaround!
Parts Used:
Agitator Coupling Kit
  • David from Ottawa, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Overflow when filling
My washer was overflowing when filling. Stopped filling when i unplugged from wall so i knew it was the pressure switch because the tube was fine. It took 28 hours from the time i placed the order to the time it hit my front porch. Got home from work and two minutes later i was washing clothes. Thanks for all the info, Tom
Parts Used:
Water Level Pressure Switch
  • Thomas from Clyde, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
selector nob would not wouk
remove top panel, replace the compression clip, then replace'd the top panel, w/pliers, remove'd then plastic clip from the timer knob, remove old knob, install new one, DONE! I've never had a place that had all parts in stock, and at my door with-in 2 days! UN-BELEIVABLE! THANKS
Parts Used:
Timer Knob
  • RICK from SPICEWOOD, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Teeth Missing on Timer Knob
I removed the plastic pin, took the knob off, put the new one on, then replaced the plastic pin. EXTREMELY easy.
Parts Used:
Timer Knob
  • Bryan from League City, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
hole in hose
order part. replace
Parts Used:
Drain Hose
  • hirfa from lake worth, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
Was this instruction helpful to you?
Thank you for voting!
I bought this second hand and it had no hose
I watched the video you provided and I could't believe how simple it was. I'm 67 yrs old and I just followed the video instructions.
Parts Used:
Drain Hose
  • Maryellen from Englewood, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
My washer did not agitate. It would spin and the motor sounded like it was agitating.
I pulled the top of the agitator off (the softener dispenser) then pulled the agitator itself off. I had to pull with some force. I used the socket wrench to remove the bolt on top of the agitator coupling. I then pulled off the old agitator coupling, replaced it with the new part. Used the socket wrench to tighten the new bolt. Lined up the slots on the new coupling with the agitator top, it slid on with a little resistance. The last part to replace was the softener dispencer.
Parts Used:
Agitator Coupling Kit
  • Ronna from Warm Springs, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the S3700E6WW
541 - 555 of 596
Back to Top