MDE16MNDZW Maytag Dryer - Instructions

The noise started intermittent and got worse. After watching an online repair of a very similar model and same brand, I decided to tackle it myself. The problem was that one of the drum support rollers had seized up. The shaft that support roller road on was also a little sticky. The noise was caused by the roller hitting the sheet metal behind the drum support roller and scraping on it. I replaced the shaft and drum roller and believe that solved the problem. I ordered other parts for the dryer drum assembly and replaced them while I had it apart. I didn't want to take it apart twice so I didn't take the time to disassemble to diagnose it. I just ordered them all and replaced them all while I was in there.

I searched for possible symptoms and viewed a video about how to remove the heating element. There were three possible parts listed for this symptom: Thermostat, thermal coupling and heating element. I decided to check the heating element continuity, so I removed the heating element. Once I looked at the heating element, I could see a break in the heating coil, so I know the problem. I put my existing thermostat on the new heating element, plugged in 4 wires and installed two screws to secure the heating element, then reinstalled the front cover to the dryer.

IT was good My husband fixed it .sorry we didn't take video but it is working alright. Thank you