Models > MDB4000AWW > Instructions

MDB4000AWW Maytag Dishwasher - Instructions

All Instructions for the MDB4000AWW
631 - 645 of 730
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
injector seal ring was leaking
simply replaced the ring and the water inlet injector, no tools need on that part of the repair
Parts Used:
Injector Seal Ring Water Inlet Injector
  • James from San Marcos, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Replace Silverware Basket.
Lifted old one out. Set new one in.
Parts Used:
Silverware Basket - Gray
  • Jerry from Lubbock, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not start
Was so easy. I am an old grandmother. I looked for parts for the dishwasher and happened on this site. When describing the problem, I said "won't start". The part number came up and I bought it. Took about 3 days for part to arrive and less than 15 min to install. So easy and if I had problems there was a step by step guide on internet. I am 100% satisfied and recommend for anyone even if you are not handy.
Parts Used:
Door Switches and Holder Assembly
  • FREDDIE from Rosenberg, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door Spring linkage broke.... replaced
Go to computer, log onto PartSelect, order part. Two days later, go to mailbox, open package. Go back to computer, log onto PartSelect, watch instructional video on how to install the part. Go to kitchen, do what the video showed you to do. Job done.
Parts Used:
Door Spring Linkage
  • Vicki from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
leak @ bottom of door
First replaced the door seal, that slowed it down substantially, but not totally. Next replaced inner door foam insulation strip and that took care of it, no more leaks. There was some corrosion evident after I scraped off the old strip, sanded that smooth with emery sandpaper and then installed new strip. Job done!
Parts Used:
Inner Door Foam Insulation Strip
  • Ron from Westwood, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Basket Tray wore out on bottom and silverware would not hold.
I just opened the package, pulled out the baskets, separated them and put them directly in the dishwasher. The video showed the part and size of the baskets which was very helpful. The delivery was EXCELLENT!!! I would purchase from PartSelect again!
Parts Used:
Silverware Basket - Gray
  • Suzanne from South amboy, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replace the rail stop
I bent the clip, inserted it the rail and snapped it shut. Easy as pie!
Parts Used:
Dishrack Guide Rail Stop - gray
  • Daniel from Merrimack, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Spray arm fell out of top of washer because retainer had failed.
Watched on site video. Very helpful as it explained how to remove the upper and lower baskets to get at the upper cabinet nut. How to remove the nut and use a socket to compress the retainer rams so they would pass easily through the hole in the spray arm. Retainer nut replacement 1 minute. Removing and replacing baskets in machine another 5 to 10 minutes.
Parts Used:
Spray Arm Snap Retainer
  • James from Dayton, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Plastic linkage had broken
Followed the outstanding video instructions. Your company is fantastic. Your attention to detail, the quick shipment (one day) and video ... stellar! We will be referring your company to all!!! Thank you!!!!
Parts Used:
Door Spring Linkage
  • Sandy from Grass Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water leaked out of door.
replaced with new gasket and it works great.
Parts Used:
Door Gasket
  • Robin from Levittown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
I needed a replacement silverware basket
I took the old one out of the dishwasher and put the new one in. The new one is much nicer and heavier than the original one!
Parts Used:
Silverware Basket - Gray
  • Jillene from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Water leaking form left front of door.
Received the parts within two days. Watched the video and it explained everything. Found it hard to believe how easy it would be, and it was very easy. Cleaning up the door in preparation to installing the new gasket took longer than the gasket installation. The gasket just pressed in the channel, frankly I was surprised that the door inner shield did not have to be removed. The water deflector just pulled off and slipped on (probably took 30 secends. Ran the dishwasher a few times, and no leaks. They had cited that the majority of leaks were due to the gasket, and it was right on. Like the dishwasher and can go for another 12 years.
Parts Used:
Water Deflector Door Gasket
  • Richard from Manitowoc, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Age made the clips brittle and they broke
Snapped in the new ones in a skinny minute. Just make sure you leave the old ones in the dishwasher rack until the new ones come in it can be confusing if they are removed. My wife took them out so I had to figure out how they went back in but was not a big issue. I did have to swap ends to make it right but less than fifteen minutes and like new again.
Parts Used:
Adjustable Peg Clip
  • Douglas King from Evansville, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
spray arm fell off
Watched the video ordered the part. It was delivered the following morning. Un screwed the spray arm holder put the spray arm and retainer in the holder then screwed the holder back in the dishwasher.
Parts Used:
Spray Arm Snap Retainer
  • Mr. Perry from Overland Park, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One Of The On And Off Micro Switches Wore Out
Followed the video on the websight
Parts Used:
Door Switches and Holder Assembly
  • ernest from rochester, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MDB4000AWW
631 - 645 of 730
Back to Top