Models > HTS15BBMFRWW > Instructions

HTS15BBMFRWW Hotpoint Refrigerator - Instructions

All Instructions for the HTS15BBMFRWW
256 - 269 of 269
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Evaporator fan motor stop running & thr foam air duct was damaged
Basically I followed your video replacement steps and it took me about 20 minutes to replace the fan and foam air duct. The video really made it easy to fix the problem of the refrigerator not cooling properly. Works great now. Thanks for your help it save me between 200/300 bucks to a repair person.. Don
Parts Used:
Evaporator Fan Motor Air Duct Foam
  • Donald from Salome, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Plastic shelf (vegetable drawer cover) had cracked in the middle.
Utterly simple! No tools required. Just lifted the old shelf out of the fridge, placed the new one on its brackets, and slid the vegetable drawers right into place in the slots underneath the shelf. Perfect fit.
Parts Used:
Crisper Drawer Cover
  • Elizabeth from New York, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Cracked Veggie Drawer Cover
Very Easy, remove the two veggie drawers, lift old cover out. Install much stronger new cover, install the two veggie drawers and you are finished.
Parts Used:
Crisper Drawer Cover
  • Lewis from San Bernardino, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Bad switch for door prevented interior light from coming on
Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of your company & it's repair video. THANK YOU SO MUCH
Parts Used:
Light Switch
  • Patricia from Sylva, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
draw slide broke off
removed broken crisper cover and replaced with new one put draws back in
Parts Used:
Crisper Drawer Cover
  • Alfred from Hudson, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Brooken plastic
Very easy
Parts Used:
Crisper Drawer Cover
  • Altin from Roslindale, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
fan hung up and made a lot of noise, the shaft to fan blade had 1" play back and forth
I first watched the video on how to do it via YouTube, to make sure there were no hidden surprises. This was probably the easiest/ quickest repair I have ever done, the ONLY thing that took any time was removing the food from the freezer
Parts Used:
Evaporator Fan Motor Evaporator Fan Grommet - Red
  • John from EAGLE ROCK, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Unusual noise from freezer.
Replaced above parts and the noise problem was not resolved. Ordered a new motor, fan blade and another set of grommets from PartSelect. The parts were delivered the next day. Took me about 15 minutes to swap the new parts in. It's been 3 days since the repair and the noise has not returned.
Parts Used:
Compression Ring Evaporator Fan Grommet - Red Lid Bumper
  • Vincent from Lyndhurst, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken shelf above crisper drawers
Super easy, remove drawers, remove broken shelf, slide new shelf into slots and return crisper drawers to their new support system. Very speedy receipt of appliance part and it took about 5 minutes to make change. Thanks much.
Parts Used:
Crisper Drawer Cover
  • Judith M from Tucson, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Noisy evaporator fan motor
I replaced the noisy evaporator fan motor after watching the video provided. All went well and now I have a much quieter refrigerator. I took apart the old evaporator motor to see why it rattled when moved and it had an electrical part that came undone and was the cause of the obnoxious noise that came from the refrigerator. Now, my wife and I can sleep better now that the noisy fan was replaced.
Parts Used:
Evaporator Fan Blade Evaporator Fan Motor
  • Frank from Sarasota, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper lid was cracked
Removed drawers put in new lid replaced drawers.
Parts Used:
Crisper Drawer Cover
  • Paul from Newark, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The fan in the freezer was making noise.
I followed the instructions in the video. The decorative parts were slightly different than in the video, such as screws at the top versus the bottom, but all of the working parts were the same. I was somewhat hesitant about applying pressure to remove the locking spring and fan blades and to replace them but the video reassured me and all went well. The refrigerator is operating as quietly as when it was brand new.
Parts Used:
Evaporator Fan Motor Evaporator Fan Grommet - Red
  • Elfstone from Kirkland, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Would not shut off , causing a freeze up upper and lower
Disconnected unit and left to defrost, Removed two screws and cover and 15 watt bulb . replace defrost timer first about 15 minutes, and proceeded to replace thermostat about 20 minutes, very simple , Thank you ,
Parts Used:
Temperature Control Defrost Control
  • John from Bedford Hills, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper Drawer cover was damaged
Removed and replaced.
Parts Used:
Crisper Drawer Cover
  • Bernard from Deming, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the HTS15BBMFRWW
256 - 269 of 269