HDA2000G02WW Hotpoint Dishwasher - Instructions

Found the parts on line, placed the order and received the parts within 3 days. Very easy to install the parts. Very happy with my experience with PartSelect. Thank you.

It was very easy for me; my husband did it. He had no difficultly at all. The step by step eamail was great.

It took no time at all to identify where the water was leaking from. I accessed a parts breakdown illustration of my dishwasher, identified the part, ordered it and three days later my leak was fixed. Hose and water inlet valve assembly was easy to swap out. I estimate I saved myself about $150.00 by doing it myself.

i found the part and order it on the site sooooo easy. it came in no time , i took the old one out in 10 seconds and place the other one (NEW) in place in less than a minute.it works fine and thanks to u alllllll

clicked in without effort. The new parts are better designed to be replaced. Need to better describe packaging to show 4 rollers per pack. Also need to caution buyers that rack end caps should be ordered at the same time. The older end caps easily break.

ordered new rack which was delivered in just a few days and out of the box in to the place were the old rack had been. old rack into the shipping box and into the garbage can. Sweet!

removed old baffle and cleaned area and installed new one

Rolled the old one out and rolled the new one in. I plan to replace the top rack next, best parts experience I have ever had.

The motor/pump Kit I purchased could fix/be installed in any GE dishwasher made since 1970. I would guess that the one I have is about 15-20 years old. I encountered only one small problem with the kit------ a motor hanger that had to be bent a bit to fit correctly. Other than that it was a total breeze. The clear instructions included in the kit helped quite a bit. In 30 minutes or so ,I was done and our machine was back in operation

Removed broken axle. Replaced axle. Attached wheels

We we're installing a used dishwasher,had to take it back out and replace the water inlet valve.

It was very easy to attach the wheel after viewing the video on the part I order from partselect.com. Thank you for the help!!

Dishwasher is 22 years old and I'm 80 years old so it took longer, about 3 hours. After removing, turned upside down and removed old pump-motor assembly and replaced with new following directions [which took a little while to figure out; my assembly was quite a bit different from the replacement pump-motor]. Pleasantly surprised at how quiet the dishwasher now runs. Normally I would replace this old an appliance, but this unit has provision for inserting a wood panel that blends with the cabinets and a new GE dishwasher with this feature costs $1300 MSRP. I'm trying to save money for when I get old so I decided to do the repair myself. For $150 it was a worthwhile investment.

Instead of purchasing a new dishwasher, I elected to replace the motor/pump assembly which the existing was noisy and leaking water. To start to took pictures of the existing assembly and marked the wiring connections. I read the instructions a few times until I fully understood and had the necessary parts identified. The only problem was the bracket that holds the solenoid has two holes for mounting the drain feedback bracket were not threaded. I was able to tap the holes (metric) and mount the bracket. Caution must taken not damage the solenoid coil.

Merely pushed the baffle into the slots in the lower right corner and the leak stopped.