GHD5711N10WW General Electric Dishwasher - Instructions

I took out all the screws on the inside of the door panel. Very carefully looked at how things were laid out. I had to remove the long silver plate at the top of the door; and the door latch (I very carefully pulled on cover, and placed parts exactly how I took them out on floor next to me). I looked at the picture of the parts; placed all the pieces in just as the picture shows. Put the latch and spring back in place, snapped the cover back on; placed the long silver plate back in place, and put the inside door cover back on. Easy peasy...but a little patience required.

Removed 8 screws from inside door cover. Opened the door and pulled off two wires from the detergent rinse dispenser with a pair of pliers and removed screws that held the dispenser in place. Removed the dispenser, placed new part in place and put screws back in and put wires back onto the dispenser. Closed cover and screwed back down. Easiest thing I've ever done.

Laid on floor remove two small bolts with nutdriver,loose water line with wrench,remove other water line with pliers.Remove water inlet valve and replace with new one

Wow, could not have been easier. The suggested repair stated that the water inlet valve was the problem 93% of the time. And, it was spot on. It was the exact same replacement part. And, once installed, it worked like a charm. I have bookmarked this website, and will use it for all future appliance repair. I simply could not be more pleased. It was a breeze. Thanks,

Piece of cake! Very easy. Thanks for quick shipment. Appreciate it.

Remove front shields on bottom of dishwasher. Shut off dishwasher and electricity. Unplug electric connection. Unscrew brace holder screws on front. Remove clamped on hose at back of valve. Unscrew valve from copper water pipe. Screw on new valve to copper water pipe. Put on clamped hose. Screw on bracket. Plug in electric connection.

Put rack in place and snapped new one in.

Quick and easy...a 7 yr old could have done it.

My wife said the door broke; we need a new dishwasher. It is not worth a $100 repair out of warranty. I checked this site the springs were about $4 each. When they arrived I unscrewed two screws holding the dishwasher to the counter; carefully pulled the dishwasher out from under the counter; found the broken spring replaced it and for good measure I also replaced the old working spring on the other side. The door now works fine. Total time less than a half an hour.