Models > GES831AS1 > Instructions

GES831AS1 Gibson Washer Dryer Combo - Instructions

All Instructions for the GES831AS1
421 - 433 of 433
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Filter Was Mangled
Took the old one out, put the new one in! (:>}
Parts Used:
Dryer Lint Screen
  • Richard from Portsmouth, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
Was this instruction helpful to you?
Thank you for voting!
lint basket was destrpyed
Really ,no repair;just put new lint basket in dryer;took seconds.
Parts Used:
Dryer Lint Screen
  • Gerry from Asheville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Wouldn't drain completely and wouldn't final spin
before you buy any parts do this first..turn on your washing machine,then push and hold start and pause at the same time.An error code will come up,look in your book and see what that code represents. Mine came up 47.that error for my machine was the door switch.
Parts Used:
Drain Pump - 120V 60 Hz.
  • frank from fostoria, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer was making a squealing noise
The repair video from PartSelect.com was excellent in describing how to fix the dryer. All of the parts were included in the replacement kit, including the screws and ball bearing. I was very impressed with the quality of the kit and the video. A $25 kit probably saved me hundreds in repair cost and saved me from having to buy another dryer. Here's to another 14 years of use!
Parts Used:
Rear Drum Bearing Kit
  • Trever from Vancouver, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Loud Racket couming from the bearing casing
Ordered the part from PartSelect.com. It came in a couple of days, which was nice. My wife was all over me to fix the dryer, or buy a new one. Needless to say, I didn't think the old one was done. The bearing assembly had an instructional video. This provided easy to follow instructions, and simple advice even I could follow. Everything went well, and the dryer is now quietly running as good as new. Awesome website, and the customer service is excellant too. WE use PartSelect.com at work all the time. Im a property manager, and the parts and advice save us thousands every year. Thanks guys!
Parts Used:
Rear Drum Bearing Kit
  • Jason from Champaign, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Need it a new belt and a lint catcher
Open the front panel push the wheel belt and done
Parts Used:
Drive V-Belt Dryer Lint Screen
  • carlos from Berwick, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
My Lint Filter Had A Hole In It
I replace the filter,,,
Parts Used:
Dryer Lint Screen
  • Charles from Centreville, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Cracked
Took cover off and removed damaged part. Removed wiring and reattached to new part
Parts Used:
Terminal Block Kit
  • Gary from Girard, KS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ball hitch wore out
Not bad two people needed for alignment
Parts Used:
Multi-Rib Drum Belt Drum Support Bearing Rear Drum Bearing Kit Dryer Drum Bearing Bracket
  • Mark from Marion, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Heater coil broken
Once the drum was removed it only took 10 min to remove and replace the coil. It took approx one hour to complete
Parts Used:
Heater Assembly
  • Joan from Conway, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Tenant lost knob and landlord replaced it.
Just pushed the knob on to the metal on-off control,
Parts Used:
Control Knob
  • Alan from Deshler, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door would not close because of broken female latch.
Very simple. I removed the broken latch with pliers and snapped in the new one in less than 5 minutes.
Parts Used:
Door Catch
  • Raymond Frattone from Richboro, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
loud squeek
followed the Video instruction which were provided. Dryer works like brand new.
Parts Used:
Rear Drum Bearing Kit
  • Cheryl from Weirton, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GES831AS1
421 - 433 of 433
Back to Top