Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The freezer coil was frosting up blocking airflow to refrigerator side
I first unplugged the refirgerator. Note the time because the refrigerator should be unplugged at least 30 minutes before plugging back in (see end for why). A trouble light is necessary to see adequately. I removed the shelves and draws and put food in a picnic cooler. I took off the lower panel in the back of the freezer, and defrosted the coils with a hair dryer. I unplugged the wires to the defroster, and then the screw holding the coil to the back of the freezer side. I lifted up on the coil unit to clear the blade that inserts into the drain. I removed the bands on the top of the coil that hold the heating unit in place. I tilted the bottom out when there was clearance, and pulled the defrosting unit down and out. I replaced the new one, and reversed the procedure, and then plugged the wires back into the new defroster unit. The bands on the top should be secured before putting the coil back in place, as well as the foam spacers on top of coil, put the two wires back in the plastic clip that keeps them away from the fan and pipes. Replace lower freezer cover panel and screws. Put shelves and food back in. If at least 30 minutes have passed, plug the refrigerator back in. If you don't wait that long, their will still be pressure in the compressor and it will not start to cool properly right away. It works perfectly now. TIP: check the end of the drain hose periodically by taking off the lower back cover and pull th hose out - not hard to do. Mine plugged from dust and lint build up backing up into the end of the hose so water didn't drain out, and ice built up causing the defroster coil to burn out. I cut a little off the hose so the water level would not rise up into the hose, but the hose would still stay in place in the plastic holder.
I slid upward and disengaged the front cover off the old drawer. Slid down the same front cover on the new one, slid the drawer in and it was like new again.
Initially i though this whole thing would take weeks, The website provided detailed exploded views, I ordered the part and it arrived in 2 days. It was too easy.
frezer not staying cold enough to freze newly added product
took the shelves out, unscrewed the rear panel,unpluged the thermistat and uncliped it from the line.Replaced with new thermistat in the reverse order. Before turning the unit back on,allowed the coils to defrost.All of the process was shown in your vidio that I was able to view while ordering the part. Thank you
Broken Parts needed to be replaced to make drawers work properly
removed drawer in frig then I removed broken shelf replaced with new one no tools needed replaced drawer. For freezer I had to remove baskets then the screws holding the tracks replaced tracks and put new tracks back ,put baskets back.
Husband: AArrgghhh - we need a new refrigerator !! WIfe: Nope, we just need to fix this one, and I know just how to do it. (partselect.com) Husband: (of little faith) Fine, miss smartypants, go for it...
0) Wife orders correct parts from partselect.com and they arrive 3 days later. 1) Wife manually removed the two old drawers and the Cover-storage pan (has drawer guides) 2) Wife attempts (unsuccessfully) to remove glass frontpiece from old drawer to put on new one. 3) Husband: "Lemme see that ... 4) WIfer (reluctantly): ...uh.. OK... 5) Husband puts drawer on counter and whacks it with his fist after disloging the front panel with a butter knife. 5) Wife (amazed) wow-nothing broke! 6) Husband repeats process and breaks the second front panel 7) WIfe (silently) Oh darn and shoot 8) Husband (verbally) *&%#!!! 9) WIfe (brightly) That's OK - I can glue it. No Problemo!! 10) WIfe (silently) *&%!! 11) Wife assembles old front panel onto first storage drawer 12) Wife cheerfully glues old front panel #2, prays, then assembles it onto second storage drawer. 13) Wife puts cover-storage-pan in refrigerator and slides top drawer in, noticing more friction and more play than ususal. 14) Wife notices that wheels are not included in the cover-storage-pan 15) Husband: Now we are S.O.L. for sure. We need to buy a new refrigerator. 16) Wife (OK, smugly) repairs herself to the storage shed, where she has cleverly kept the old part, which still has the wheels on it. 17) Wife removes wheels from old part and installs them onto new part without breaking anything. 18) Wife installs both drawers and is inspired to clean out the newly restored refigerator. 19) Husband (amazed) admits that family does not need to buy a new refrigerator after all 20) Teenage daughter emerging from her room in a daze, "Hey, is that a new refrigerator?" 21) Wife makes plans to spend remainder of budget that would be used to buy new refrigerator on pearl ring that she has been coveting. 22) AND THEY LIVED HAPPILY EVER AFTER....
got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!
The ice would not come out of the front door. The flap between the door and the ice would not open.
Popped off the front access panel. Removed the heat motor and repalced with the new one. It is fixed and working great. Partselect Delivered the part the day after I ordered it. Thanks!!
There was a hole in the plastic bin where ice fell through to the freezer.
I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer to the bin and re-inserted it back in the refrigerator. It took me about 5 to 10 minutes. It's really easy!
Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.
I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAIT OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!
The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.
Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.
