This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is to shield the ice crushing blades within the ice container. To make this repair you will need a Phillips screwdriver, a flat blade screwdriver, a quarter-inch nut driver, and a pair of channel lock pliers. For this installation, work gloves are recommended. Note that this piece may look different or be a different color than the original, but this part will fit and function in the same way as the original part.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Dispenser Crusher Housing
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker dispenses too much ice | Ice maker not making ice | Ice maker dispenses too little ice
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dave D - January 29, 2022
Verified Purchase
quick fix
The part was perfect and the install video was to the point. 30 minute fix
★★★★★
★★★★★
Kevin K - December 8, 2021
Verified Purchase
Right part
Always get the right part from Parts Select. Just forgot to order another piece I need.
★★★★★
★★★★★
JOE O - June 9, 2021
Verified Purchase
Easy order and delivery.
Have bought from this seller before. This part worked as the original part. All's well, working well.
★★★★★
★★★★★
Kathy M - June 2, 2021
Verified Purchase
Great!
Everything about it was perfect! Fit and easy to install!
★★★★★
★★★★★
Carolyn M - December 14, 2020
Verified Purchase
It's working!!!
Great video to guide the repair process. Love Steve!
★★★★★
★★★★★
Michael S - October 11, 2020
Verified Purchase
Easy to do!
Well satisfied!
★★★★★
★★★★★
Paul D C - September 3, 2020
Verified Purchase
I now have a spare ice dispenser for my refrigerator.
I received the part and reviewed PartSelect's video on how to install the part. As I was putting it together I found another part broken that needed replacement. I left the repair and ordered the other part from PartSelect and was supprised to get it in a short time. Since it had been about a week since I had tried to assemble the dispenser, I reviewed the video again and in thirty minutes I had a fully assembled ice dispenser.
During the time while I was waiting I found a new complete ice dispenser from a local parts supplier. That is the reason for my title.
★★★★★
★★★★★
Walter K - July 17, 2020
Verified Purchase
Easy repair
Part was an exact match and using the video in the email I had it installed in 15 minutes
★★★★★
★★★★★
Fernando F - June 23, 2020
Verified Purchase
Exact Replacement
Easily installed the new part following the video.
★★★★★
★★★★★
Bernard D - May 21, 2020
Verified Purchase
easy repair
video made repair easy
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice crusher selection door broken
Removed ice bucket from freezer. Remove ice. Remove 2 phillips head screws from the inside front of ice bucket, and 2 fromt the bottom front to remove the front cover. Remove the E clip and washer from ice crusher shaft. Remove 4, 1/4” head screws from ice crusher housing. Unclip the selector shaft from crusher door paying attention to p
... Read moreosition.Slide housing off of shaft and discard. Install new housing over shaft and install the 4 screws. Install selector shaft into door. Install the E clip and washer onto shaft. Install front housing with the 4 screws previously removed. Refill bucket with ice and install bucket back into freezing taking care to orient the ice screw shaft into the cog in the back of the freezer as well as the door selection shaft. Test operation.
Read less
shawn from CORTEZ, CO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Every part of the ice crusher (blades and housing) bent/broke in successive failures
This was the last step of serial repairs to the ice crusher portion of the ice maker. I have practically replaced the entire assembly. All the blades were installed incorrectly (at factory? Afterwards?) and had bent. That caused problems for other parts. I hadn't noticed that the housing was weakened and my prior repair I did something du
... Read moremb and the door on housing wasn't closing properly, so it snapped. I bought a new housing and installed it. My #1 tip is WATCH THE VIDEO! There are some things that have to be put together just so. You need things to line up and be under slight tension from springs. Last time I had it under too much tension. The door got in the way of the blades and broke. So this time I was more careful to do it correctly. Everything is working perfectly now. This design is clever, and I feel like I can diagnose and fix it again in future. "Steve's" instructional videos are a huge help. He shows exactly what to do.
Read less
Robert from INVER GROVE, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispenser Crusher Housing was broken
I followed the instructions, my ONLY issue was about the Part 46 the Ice Dispenser Actuator Rod. The front of the arm has flared out grooves and it didn't warn me about making sure the rod is properly aligned thru part 23 Front Plate or else when the ice maker actuates the rod it will not move properly if the grooves are not aligned on e
... Read moreach side of the Front panel. I hope you can understand what I mean, if not just look at how the Part 46 rests in Part 23
Read less
Pete from THE PLAINS, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installation of Frigidaire Housing crusher assy.
I followed the YTube video. The ice maker doesnot crush ice. The auger moves the ice to the dispenser. Is there a position for metal blades when assembling auger?
Craig from BRIDGEPORT, NE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic gate to redirect ice to the crusher broken off
Removed ice maker bin...removed screws and housing and reinstalled all...very easily completed.
Donald from WEIRTON, WV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Crusher Houseing cracked broke into pieces
Remove ice drawer ,Removed front of drawer 4 screws ,Removed broken crusher 3 screws Ordered new parts reassembled replaced fix blade spacer that was broken and blade cover housing reattached front of drawer !
The repair went easily after watching the video, took me less than an hour to complete the repair.
Les from LIVERMORE, CA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Director Door Broken In Half
I was able to replace the housing by only removing the front cover, the e-ring and washer and the 3 hex-head screws. I was able to work the old housing around to get the actuator arm off and then get it properly inserted into the new housing. Attach the new housing, IMPORTANT: make sure you get the fixed-blades and spacer assembly in the
... Read moreslot of the housing that holds them in place, replace the e-ring and washer, check that the actuator arm operates the door properly and replace the front cover. The videos can be helpful but these shortcuts will save some time.
Read less
Cloid from HOOVER, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crusher housing cracked
Removed ice tray, disassembled ice tray assembly and crusher housing making sure to note the spring location, spring etc, installed new plastic housing making sure to reinstall the spring properly and the fixed crusher blade into the notch cutout., reassembled ice tray.
Adam from Clayton, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
July 22, 2019
The ice dispenser stopped dispensing crushed ice. The whole ice pieces then backed up in the dispensing hole and a piece of white plastic came out with it. Does that piece help with the crushing and can it be replaced? What is it? Thanks
For model number FGUS2642LF1
Hello Susan, thank you for your question. The white plastic piece probably came from the ice bucket itself. We would recommend removing the ice bucket and inspecting it over to find the broken part. Look at the auger, and the front and back round pieces that push the ice. The part that allows for crushed or cubed to be dispensed is PartSelect Number: PS8691994. To fix the issue of the unit only dispensing the whole pieces of ice this part should be replaced. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Paula
August 12, 2019
Does the dispenser crusher housing come with the little door shown as #13 in the diagram? It does not specifically show it in the product photos and the little door is what broke on my dispenser.
For model number FGHS2655PF5A
Hi Paula, thank you for your question. Part 13 is now part of the housing, so you would need this part. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
August 19, 2019
Frigidaire, side by side, the ice maker auger won't stop running when I close freezer side door unless I press the lock button. What is happening, I'm worried!?
For model number PLHS69EESS2
Hello Thomas, Thank you for the question. I suggest checking the micro switches in the dispenser, PartSelect Number PS12724042 to see if one is stuck in the on position and causing the dispenser to try and dispense ice. Hope this helps!
Ice cub maker makes too much ice, over filling the ice cub tray, open the freezer door and ice cubs fall onto the floor.
For model number PLHS267ZDB2
Good Day Todd. Thank you for your question in regards to your unit (Model Number PLHS267ZDB2). Based on our research you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Dispenser Crusher Housing (PartSelect Number PS2378689). 2) Ribbon Cable Harness (PartSelect Number PS1526364). 3) Ice Chute Door (PartSelect Number PS1526426). 4) Water Dispenser Control Board (PartSelect Number PS1526494). You can order these parts either online at our website www.PartSelect.ca or by calling us by phone at 877-910-4613. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
August 14, 2019
Do you sell the 1/4" hex head screws labeled #25 and the phillip's screws labeled #26 of your ice container assembly diagram?
For model number 25357113600
Hello Doug, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dan
April 11, 2018
Does the flap that the actuator opens come with the ice crusher housing.
For model number DGUS2645LF2
Hi Dan,
Thank you for your question. The flap you are looking for is sold with the dispenser module. The part number listed under your model number for the dispenser module is PS10060200. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jeff
February 19, 2019
Hi. When i press for ice, it works, but it's too loud (sort of grindy, squeaky sound). Also, the crushed ice doesn't work any more. When i look carefully at it, the dispenser crusher housing is cracked badly. I'm fine with ordering a new one, but i wonder if my noise problem/no crushed ice is a bigger problem. Should i buy the entire assembly instead of just the crusher housing? Thanks. Jeff
For model number FFHS2622MSN
Hello Jeff, Thank you for the question. If the housing is damaged it can cause the blades and internal parts will not be able to operate properly, causing the noise and no crushed ice. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Sandy
June 19, 2019
When you press the ice dispenser it keeps building up ice in the bin on the inside of the door and then the ice gets stuck. You have to put your hand up in there to get the ice to come out and then if all comes out and flys everywhere. Will this part fix that
For model number FGHS2631PF4A
Hello Sandy, thank you for inquiring. Yes, this replacement Dispenser Crusher Housing for your model may fix the issue. You may also want to consider either the Drive Blade part PS1526405 or the Crushed/Cubed Ice Solenoid Assembly part PS8691994 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Steve
November 22, 2017
Only makes crushed ice will not dispense whole cubes
For model number FRS26R4AB6
Hi Steve,
Thank you for your question. I would suggest taking a look at your cubed/crushed ice solenoid. It could be that part is acting up. I have listed that part in a link down below for you. You can test it with a multi meter to see if it is working properly or not. I hope that helps. Good luck with your repair.
I repaired my icemaker. Put in the part listed. But i don't know if i put the spring on the auger back in the correct position. I don't understand why you don't show a picture of the correct position for the spring, but you don't! You don't show the correct position in the video. There were at least two ways to position it. Now my ice dispenser only dispenses cubes. No crushed ice any more. When i push for crushed ice, i get cubes. Oh well, i guess i'll have to live with it since you won't show the correct position for the spring. Dispenser crusher housing
Hi Shannon,
Thank you for your question. If you are talking about the spring that goes on the bottom of the bucket near the back, there is only one way for that spring to be installed. You would have to install it horizontally with the screw hole tab facing out. If you go to minute 9:07 in the video, you will see how that part is supposed to be installed. It sounds like your solenoid is constantly activated in the back, because the default setting for ice in your machine is crushed ice. I would suggest just checking to make sure you reinstalled your ice bucket into your freezer correctly. I hope that helps. Good luck with your repair.
