EDW1500J00BB General Electric Dishwasher - Instructions

I popped out the stoppers at the end of the gliders. removed broken rollers and slid on new rollers.re-installed stoppers, tested all functions. tested good

Replaced the Piston and Nut Assembly! Removed rear strainer by removing four screws. Unscrewed the assembly using a large handled pliers for leverage, cleaned the threads and installed the new one with my hand. I then put the strainer back in using the same four screws. I also replaced the Lower Spray Arm with Tower because a tab on the assembly was broken. I used the same long handled plier to carefully turn the assemble out. I put the new one in by using only my hand to screw it in.

Held panel in place and drilled holes and installed drill screws.

I looked on Part select at the model number of the dishwasher. I looked at the diagram of the diswassher and the hose. I read some of the repair stories. And became sure the upper hose was my problem and was armed with the ability now to fix my machine. Thanks PartSelect

Pop out the old baffles with the help of a screwdriver, push in the new parts in their places and done.

We watched the video describing the replacement process, cleaned the groove after removing the old gaskets, and installed the new gaskets as sown in the video. The installation passed the test washing a full load after the job.