ECBP70WK4WW General Electric Range - Instructions

checked the voltage on baking element looked on line for part when it came in just replacled it. It was so simple

Removed the old element and installed the new one.

It was so easy I just unscrewed the back that was easier for me and inserted the wires and done!

1 Turn oven off. 2 Turn oven light on. 3 Remove 2 1/4" screw holding element in place. 4 tip front of element up and the back of the element down and pull gently down and out. 5 remove 2 1/4" electrical connectors from the element. 6 discard old element. 7 install new element in reverse order of above steps.

The age of the system resulted in the cook top being heavily stuck by food-stuff to the range surface. The result was a twisting of the top when breaking it free. It caused the cooktop (a $500+ part) to crack diagonally across the whole surface. Thus ended the quick do-it-yourself process, and out to buy a new range. Parts-select was very good about the return process of the un-used and un-opened burner element.

-Pull the oven away from the wall and unplug it. -Remove the sheet metal panel on the middle of the back of the oven exposing the electrical connections. -Pull off the wire connections from the broiler element and identify which one goes to which side. Pull apart the connector for the thermostat -Go inside the oven and remove the 2 screws holding the element to the back wall. -Remove the 2 screws holding the element to the top of the oven. -Pull the element out and remove the thermostat, and attach it to the new element bracket. Reinstall everything in the reverse order.

My Range had the issue I mentioned here. I put off the repairs for a long time, but Thanksgiving was around the corner and we needed a working oven. I had made a previous call to repair man and was quoted $75.00 for a service call to come and check the issue. Before calling a repair man back, I decided to pull the rear cover off the range to see how complicated it would be to repair. I removed the rear cover and found that everything was connected to this "Oven Electronic Control" except for the top elements (explaining why they still worked and the oven didn't). This made it seem that this part would surely have to be causing the issue. I did a search on Google and found this company and the part that I needed. The cost of the part was less than the service call for a repair man would have been. I ordered the part and paid for next day delivery. The part shipped on Monday and arrived on Tuesday. For the installation, I had to identify the wiring because the connector layout was a little different. When I looked closely I found that the terminals were numbered the same as the old part. I replaced wire for wire, put it all back together and tried it out. It worked like a champ. I was thrilled to have been able to find the part with schematics on this web site and it was the correct part and fixed the problem. I was also thrilled that I saved a couple hundred dollars fixing it myself and that it was so easy. I would highly recommend this company for the ease of use of finding the part on their web site, the reasonable price and their prompt processing and delivery.

Shut power off to stove. Removed two screws with a 1/4" nut driver. Extracted the old element. Discovered one of the two solderless connections was not connected. Pulled the stove out and removed the back panel, only 4 screws, and exposed the wiring to the element. Discovered a wire connection had burned out. This was most likely due to a loose connection. I installed the new element and made the good connection. After cleaning up the burnt wire end on the other wire, I installed a new crimp terminal and connected it to the element. These crimp connections need to be tight. Replaced back panel and plugged stove back in and tested it. All worked fine. Put stove back in place. About 30 minutes. I am an electrician but do not normally do appliances. Good luck.

Man..this was easy. I'm no Mr Fix-it, and had actually left a message with a repair guy to come and replace the fried oven(bake) coil. After doing a Google search, and seeing the video by the PartSelect guy, I said, "hey I can do this". I ordered the part, it came wrapped better than my first born child, and it was a breeze to install. My wife is still in shock that I did it!

Unpluged the unit from the electrical outlet,unscrewed the unit from the back wall. I used electrical tape to hold the wires so they wouldn't go back inside the stove. Replaced the unit with the new one. Pushed the prones into the unit,put the screwes back and in now time i was finished.Quick and easy job for a lady.

Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.

Never did a repair like that. Had to ask store clerk what you call that thing you take off bolts with. But repair went great. Very satisfied. Part arrived very quickly and saved our Christmas dinner. THANK YOU!

I had read some accounts of the terminal wires pulling back into the insulation, and, sure enough, one of them did before I could clip it. Even at that, pulling the stove out and removing the four nuts that held the shield in place only added another five minutes, tops. The whole thing took less than 15 minutes to change. One nut driver removes the two nuts that secure the bake element to the back of the oven, and also fits the four nuts on the shield on the back of the stove. Very easy repair, thanks to the advice given by others on this site. Thanks.

1. Pull range out from wall and disconnect power cord from outlet. 2. Remove 5 screws to remove panel on back side of range to expose the bake element connections. 3. Pull push-on terminals from element. 4. On inside of oven, remove two screws and remove old element. 5. Insert contacts end of new element through the holes in oven back wall. 6. Reverse the disassembly steps to complete the installation.

I watched your video on the subject and followed it exactly. It explained everything I needed to know. The hardest part was CLEANING under the stove once I pulled it out from the wall!