ADW862EAS (PADW862EAS0) Amana Dishwasher - Instructions

Ordered parts and referred to exploded component drawings on the website to install replacements. Videos were helpful. Be careful to check all plastic parts for deterioration so that you can order them all at once. I had to make two additional orders for rollers and retainers that looked fine, but were brittle and needed replacement.

Followed the video on your site. Removed old gasket, put in new one...easy, breezy! For good measure, since we weren't sure where the leak was coming from, installed a new water deflector as well, which was also extremely easy. Out with the old, in with the new and no leaks!!

I made the repair easily by watching the step by step video supplied on the web site...easy peasy! Thank you so much. Saved me lots of money I'm sure. Could have saved $5 more if my dog hadn't chewed up the wheel from the rack! HA! Thanks so much. My dishwasher runs more quietly than it has in awhile!

It was very easy. Simply remove old seal with a pair of needle nose pliers. Clean or scrap any build-up from old seal location and then push-in the new door seal. Close door and let the new seal form to the door.

replacing the rack was easy - but first we had to swap out the plastic spay tower that twist-locks onto the new rack. My smart wife figured this one out, despite the lack of any trace of instructions (the less astute amature repairperson would have mangled the whole shootin' match attempting to make the change); that said, the rack was not a "one-to-one" match, as it lacked the original's high left sidewall and a few other minor differences that did not affeect the overall performance of the part - a not uncommon occurance in the aftermarket parts world.

Pulled the old gasket out, put the new one in place.Used a screwdriver and fingers to push the new gasket firmly into its seat. Repair done. I've done a few repairs in my day, none easier than this.

Vidio was all i needed.

Followed directions on site video. Total time 5 minutes. Leak repaired

Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

I grabbed a hold of the old gasket and removed it. I then took the new gasket and set it in place on one corner. I inserted it around the groove and with just one adjustment for length, I took the round bottom of a spoon to set and smooth the gasket into place. No more leaks. 5 minute fix.

Replaced door seal, very easy!

Placed it back together. Part select was right on time and used this companys site for yrs

Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!

Removed the upper rack rail stops. Removed the upper rack by pulling outward until the rack rollers cleared the rails. Attached the new roller on the upper rack. You can look at the other undamaged rollers to see how they lock into place. re-install the upper rack by feeding the upper rack rollers back onto the rails. Install the rail stops back into the rail ends,and the job is complete. VERY EASY!

WE installed a new door gasket. However the machine still had a leak only on the left side. Called a tech and he came and said the gasket was installed backwards. Apparently the original one was also because we installed the new gasket exactly the way the old one was. We are all set now.