Admiral Washer Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Admiral Washer Hoses and Tubes
Your Price
$24.94
In Stock
Admiral Washer Drain Hose
PartSelect Number PS12578897
Manufacturer Part Number W11244231
The drain hose carries used water from the washer to your house drain.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Delmar from EAST TROY, WI
replaced drain hose that was missing
slipped the new drain hose on and with locking plyers slipped the wire clap in place after three trys
Read more...
Your Price
$33.73
In Stock
Admiral Washer Tub-to-Pump Hose
PartSelect Number PS11765836
Manufacturer Part Number W10899966
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
Fixes these symptoms
- Leaking
- See more...
Your Price
$21.96
In Stock
Admiral Washer Water Inlet Hose
This time I was replacing both the water inlet valve and the hose leading to the disperser.
First remove the two screws holding down the control panel. It then flips back and hangs out of the way behind the washer. Then remove the spring-clip holding the rear plate to the body of the washer, one on each side under the control panel.
Next you need to remove the screws holding the body down to the base at the rear of the machine.
I then tipped the body of the washer forward and let it rest on a bucket so I didn't have to take it completely off. Then it is easy to access the hose and the water inlet valve. Shut off the water and remove the supply hoses to the washer. Remove the two screws holding the water inlet valve to the rear of the washer using a nut driver. Next remove the wires to teh inlet valve, making sure to note which one is cold and hot, and which orientation they are. Mine was yellow on top and brown on bottom. Next remove the springs clamps holding the hose on. Replace the hose re-using the same clamps. Replace the water inlet valve reverse the process to re-assemble the washer. Tilt the body back on, put the screws in the base, clamp the back to the body, flip the contorl panel back over and insert the screws. Reattach the water supply lines and you are done! Read more...
PartSelect Number PS11741209
Manufacturer Part Number WP3357328
This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Timothy from Springfield, VA
Cold water flowed slowly
First, be sure to take the washer apart properly! The first time I fixed my washer I took it apart the hard way to change the clutch, and believe me it took longer to put it back together!This time I was replacing both the water inlet valve and the hose leading to the disperser.
First remove the two screws holding down the control panel. It then flips back and hangs out of the way behind the washer. Then remove the spring-clip holding the rear plate to the body of the washer, one on each side under the control panel.
Next you need to remove the screws holding the body down to the base at the rear of the machine.
I then tipped the body of the washer forward and let it rest on a bucket so I didn't have to take it completely off. Then it is easy to access the hose and the water inlet valve. Shut off the water and remove the supply hoses to the washer. Remove the two screws holding the water inlet valve to the rear of the washer using a nut driver. Next remove the wires to teh inlet valve, making sure to note which one is cold and hot, and which orientation they are. Mine was yellow on top and brown on bottom. Next remove the springs clamps holding the hose on. Replace the hose re-using the same clamps. Replace the water inlet valve reverse the process to re-assemble the washer. Tilt the body back on, put the screws in the base, clamp the back to the body, flip the contorl panel back over and insert the screws. Reattach the water supply lines and you are done! Read more...
Your Price
$21.29
In Stock
Admiral Washer Tub-to-Pump Hose Kit
PartSelect Number PS334685
Manufacturer Part Number 285871
This kit comes with the clamps.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Marc from Morton Grove, IL
Two leaking hoses in my washing machine
Put the machine on its side. Remove old hoses and screw new ones into place. Done in under 20 minutes.
Read more...
Your Price
$22.76
In Stock
Admiral Washer Break Hose
PartSelect Number PS11745951
Manufacturer Part Number WP8317926
This hose goes from valve to inlet.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
JANET from GERMANTOWN, NY
The water intake hose had a hole and was leaking. I think a rat chewed it.
I first watched a YouTube video on how to open up the machine. It was a breeze. I removed the part the hose attaches to where the water comes out and into the tub. The hardest part was removing the old hose clamps. Had I known I would have used new clamps. I took off old hose and replaced with the new one, it took longer because of the clamp issue. Otherwise it went fairly easy, to my surprise. Even tho I am a 70 yr old woman I will try to fix what I can. Doing this saved me at least $600. For a new washing machine. I'm so proud of myself.
Read more...
Your Price
$62.53
In Stock
Admiral Washer Drain Hose
PartSelect Number PS11748248
Manufacturer Part Number WPW10096921
This drain hose is 42" long and includes the clamps.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Francis from Yuba City, CA
I bought a used washer from a friend and they had cut the drain hose short .
I got a pair of channel lock pliers and took off clamp on the hose, after laying wash machine on it's side, poped off a few little clips and replaced the hose, and now everything works perfect.
Read more...
Your Price
$48.06
In Stock
Admiral Washer HOSE-DRAIN
PartSelect Number PS11749880
Manufacturer Part Number WPW10189267
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
John from MT PROSPECT, IL
Very little hot water was the problem
I followed the video you guys sent me. You guys and woman are the best!
Read more...
Your Price
$28.67
In Stock
Admiral Washer Tub to Pump Hose
PartSelect Number PS11738836
Manufacturer Part Number WP21001915
Hoses are the most likely cause of clothes washer leaks. This tub-to-pump hose carries the water from the tub to the drain pump. If you notice that your tub is leaking during the wash cycle, check the the hose for holes. If the tube does have a hole or crack in it, the part should be replaced. Also, check both the connection and the juncture of the hose with the drain for your house. While you are looking at the hose, check to see if the threads or clamps are corroded or loose. This OEM replacement pump hose is 20 inches long, and fits most clothes washer units. Remember to turn off the water supply and disconnect the power from your washer before you begin this repair.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Warren from Lynden, WA
I noticed water on the floor , so I looked under the wash machine while it was running and noticed water dripping form the bottom.
I brought the wash machine out side, hooked a garden hose to the cold, capped the hot, took off 2ft. square back inspection cover, and plugged in the power cord for a test for leakage location. The hose from tub to pump had a small wear hole, thus leaking water on the belt and making it slip more. When my parts came in from Parts Select the repair was about 45 mins. with coffee. I laid unit on side, cleaned pulleys with rag to remove old belt fragments, and I put new belt on the 2 small pulleys then rolling onto last bigger pulley. For the hose repair- I used a screwdriver to push in the clips under front of top lid. I removed 2 screws with my 1/4 rachet to remove front panel. With my channel locks I pulled off hose , then installed new hose. The unit works great.
Read more...
Your Price
$21.53
In Stock
Admiral Washer Inlet Hose - 5 FT
PartSelect Number PS11746820
Manufacturer Part Number WP89503
This hose can handle hot or cold water and is five feet long.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Helen from NASHUA, NH
Your Price
$26.01
In Stock
Admiral Washer Extension Hose
PartSelect Number PS334681
Manufacturer Part Number 285863
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Fixes these symptoms
- Leaking
- See more...
Related Admiral Washer Parts
- Admiral Washer Agitators
- Admiral Washer Caps and Lids
- Admiral Washer Hardware
- Admiral Washer Hinges
- Admiral Washer Knobs
- Admiral Washer Seals and Gaskets
- Admiral Washer Springs and Shock Absorbers
- Admiral Washer Switches
- Admiral Washer Transmissions and Clutches
- Admiral Washer Wire Plugs and Connectors
- All Admiral Washer parts
