Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert P - September 11, 2020
Verified Purchase
easy repair work as expected
part was delivered fast an the residents microwave is back to running correctly
★★★★★
★★★★★
Marianne M - January 27, 2019
Verified Purchase
Good part , easy to fix microwave and works great!
The part works great ands taffy was very helpful
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Turntable did not turn
The motor shaft was broken. This microwave is mounted over a stove. first unplug the microwave. I removed 6 screws from the bottom to gain access to the turntable motor. Remove single screw holding motor. Rotate motor to remove. unplug wiring plug from motor. Reverse procedure to install new motor. Note that spindle for turn table go
... Read morees on from above and is indexed to motor.
Read less
TIMOTHY from AVON, IN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 1, 2018
Is this turntable motor compatible to 60hz, 3.0 w, 3rpm . Those numbers are the specifics for the electrical. The original part number is ssm-16hr mdck0300f
For model number RVM1535DM2BB
Hi John, Thank you for the question. This motor is 60hz, 3rpm and 120V. Sorry it does not state the Watts. Checking the model number this is the correct turn table motor for the appliance. The ssm-16hr mdck0300f are not actual part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.