This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside of the microwave while the microwave is running. You may need to replace this part if the existing one is burnt-out or broken. If the existing light bulb is brok...Read moreen, disconnect power to the microwave and remove the bulb base with a pair of needle nose pliers. This is a common wear item, so it is recommended to order a spare. These light bulbs are sold individually.
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse ...Read moreis at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair.
NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
This light bulb socket that is used in microwaves. The socket is meant to fit small-base light bulbs. * Please note: The light bulb is not included with this part and is sold separately. If the following symptoms occur, you may need to replace this part: existing socket is broken or cracked, light bulb is not turning on, or new light bulb...Read more does not work. Remember to unplug microwave before installing this part and refer to the manual provided by the manufacturer for installation instructions and a detailed diagram.
This is a cooking tray and it is a common component in any microwave. This piece is transparent and is made of glass. The diameter of this part measures to be roughly 12.5 inches. Although you may find it to be slightly smaller than the original tray it is a genuine OEM replacement part that is sourced directly from the manufacturer. The ...Read morefunction of the cooking tray is to provide a stable surface that rotates in the center of your microwave. The purpose of this piece is to help ensure food cooks evenly in your microwave every time.
The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open (normally opened). The switch monitors the door latch position, and communicates whether the door is open or closed to the electrical control board. This door switch is approximately 1 inch long, and has 2 metal prongs cal...Read moreled terminals that extend out of its body. Common symptoms related to a faulty secondary door switch include: microwave will not turn/shut off, or the microwave will not heat properly.
NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.
The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notice that this part is cracked or broken and will need to be replaced. You will need to remove the screw holding the cover in place. Unhook the cover from the bott...Read moreom panel. Bend the tabs up that are securing the old lens in place. The textured side should be facing up. Place the new lens into place and secure back into place.
Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door before doing this). Remove the grill. Remove the screw on the left holding the control panel in place. Loosen the screw behind the panel. You should now be able to...Read more lift the panel up and pull forward to detach. You will find the door switch by removing the screws to detach the switch assembly. Press on the release tab to remove the middle switch. Disconnect the wire connector to release the old switch. The door switch is normally closed.
This part is the replacement flat cab mounting bolt for your microwave. The bolt is approximately 4 inches long. It is designed to hold the microwave in place in your cabinet. The main reason to replace this bolt, would be if the old bolt is stripped or missing, and the microwave will not stay secure in the cabinet. This is an OEM part sourced directly from the manufacturer, and it is sold individually.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen - For model number RVM1535DM2BB
December 30, 2019
Heat food with foil the bottom on the microwave is not working
Hello Stephen thank you for your question. There are a few parts we would recommend testing if there is no heat. They are the Line Fuse Part Number: WB27X10388, Diode Part Number: WB27X10597, and the door switches which are Secondary Door Switch Part Number: WB24X829 and Monitor Door Switch Part Number: WB24X830. If those parts are tested and are fine, the issue could be with the thermostats. I hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Tina - For model number RVM1535DM2BB
December 26, 2023
What is the size of this model and what are the watts?
Hello Tina, thank you for reaching out. According to our research, the capacity of your model is 1.5 Cu. Ft. The dimensions of your model are: height: 16 1/2 inches, width: 29 7/8 inches, and depth: 15 1/16 inches. The wattage of your model is 950 watts. We hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Aja - For model number RVM1535DM2BB
January 14, 2022
One of my kids attempted to cook noodles without water in the microwave for several minutes. It still works but even after steaming vinegar and leaving baking soda inside for 24 hours, it still has a lingering burnt smell that gets worse when in use. What can i do to get rid of the smell?
Hi Aja,
Thank you for your question. To remove the burnt smell from your microwave, place 1 cup of water in a microwave safe container and add some lemon juice to it. Microwave on high for 5 minutes. Also, you can squeeze lemon juice onto a plate and place the lemon halves on the same plate. Place it in the microwave for 5 minutes. Once the cycle is complete, remove the items from the microwave and wipe the inside with a paper towel. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Mary - For model number RVM1535DM2BB
October 28, 2023
The turn table starts turning as soon as I open the door, although the unit is off. Is this a normal feature?
Hi Mary, thank you for your inquiry. Based on our understanding, the issue is because of the door interlock switch, part number PS237422. The door interlock switch prevents the microwave from starting when the door is open. We would recommend checking the door interlock switch to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 peoplefound this instruction helpful.
Kim from Cliffside Park, NJ
Really Easy
15 - 30 mins
Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic
... Read morerowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
Was this helpful?
Thank you for voting!
A Cooking Tray developing a growing crack
474 of 480 peoplefound this instruction helpful.
Ruth from New Bern, NC
Really Easy
Less than 15 mins
The unbelievable happened. Our glass carousel cooking tray developed a crack. Each day the crack got longer. I ordered a new one on Tuesday and it arrived the next morning just before the cracked one completely cracked. I have never experienced such fast service. I highly recommend PartSelect and their helpful service.
My Orders
