GE/GE_Thumb/00115502i02.gif
See part 203 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Terminal Block Kit

★★★★★
★★★★★
11 Reviews

Rated by 3 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 1542!
 Fits your 1542!
PartSelect Number PS953027
Manufacturer Part Number WB17T10011
Manufactured by GE
Product Description

Terminal Block Kit Specifications

This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Element will not heat
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB17T10011 replaces these:
AP3736048, 1085735, WB17T10012, WB17T10015, WB17T10016, WB17T10023
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Felix
February 3, 2018
After a power surge the control panel went blank. I can not find a fuse on this model. Would this part possibly be the culprit?
For model number JSP46SP3SS
Hello Felix, Thank you for your inquiry. This part is where the power cord comes into the stove and hooks it into the wiring. If your control panel has gone blank, however, I would test the control panel and electronic control board first. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Diogo
December 11, 2018
Where do I find the red wire that attaches to the terminal block furthest to the right? The block melted only where the red wire on the far right was connected and it burned the red wire a little. The black and the white ones are fine. Why did only the red wire get burned? I am going to replace the power cord and the terminal block but also want to replace the red wire. Please help, thank you.
For model number JB850SF1SS
Hello Diogo, Thank you for the question. The wire may have not been fully connected and shorted out. We do not carry the wiring sorry. What I suggest is that you contact the manufacturer directly for the wiring. Hope this helps, good luck with this repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Jeff
February 25, 2018
Hi, my oven isn't heating up. So far i've replaced the control panel, the heat sensor and element. What else could it be?
For model number JB640MR4BS
Hi Jeff, Thank you for your question. If you have replaced the other parts and the oven is still not heating, you will need to check the terminal block. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Linda
February 10, 2022
our cook top pre heat we found not working baking for Christmas I set the pre set for 350 it only got to 250 today I need 450 for fish we had to set it at 485 then it only went to 446 the repair man thinks it is the oven vent but the presets aren't working right
For model number JB400DP1BB
Hello Linda, thank you for writing. The issue is one of two things. The Temperature Sensor PartSelect Number PS10059162 or the Oven Control board PartSelect Number PS3486649. We have an installation video for you to access. We hope to hear from you soon.
play video

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
RYAN
July 23, 2017
Can one just purchase the terminal screws individually without purchasing the entire terminal block for hooking up to three prong outlet?
For model number JSP47S0H2SS
Hi Ryan, Thank you for your question. Unfortunately for this part to get the screws you have to order the whole kit. I hope this helps!

Was this helpful?
Thank you for voting!
Maria
September 16, 2019
Re: GE profile stove the conventional bake and roast does not work, the fan is not moving like it should be. Do i need a new motor?
For model number PCB909SP2SS
Hello Maria and thanks for writing. Your first step should be to check the temperature sensor # WB21X22134. If that turns out ok you will have to consider a replacement motor. There is also the terminal block kit that might have a defect # WB17T10011. Hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Mark
December 28, 2021
Surface elements work,oven dos't, no power to control panel.
For model number Jb850df1ww
Hi Mark, Thank you for your question. If there the electronic control board is not working, it will need to be replaced. The part number listed under your model number for the electronic control board is PS11700841. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Ellis
September 2, 2022
I don’t know if this is what I need. I replaced 2control switches. when one burner is on and I turn other burner on it blows the switch and kicks the breaker.
For model number Jb665ek3es
Hello Ellis, thank you for your inquiry. Please make sure the range has a dedicated breaker. There can be multiple reasons behind this problem. The most probable are damaged wiring (part number: PS12170315) and a faulty control switch (part number: PS11729102). Please feel free to contact customer service for further assistance. Thank you.

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
  • jonathan from willow springs, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
52 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original terminal block plastic shielding melted, protecting appliance when the wires overheated.
Safety first * Unplugged 220 VAC from outlet. Removed shield cover screws with 1/4" hex nut driver (5 screws). Removed all 6 silver screws from terminal block with 1/4" nut driver, freeing all wires. Removed the green ground screw and ground bracket from center terminal. Cut away (using the drill) melted original terminal block plastic to access the 2 black 1/4" nuts holding original terminal block onto appliance. Discarded the original damaged terminal block. Attached the new terminal block, aligning the mounting holes and the terminal block the same way the original terminal block was lined up and re-used the black 1/4" nuts (original used because the replacement package did not include new black screws). I bought a new appliance cord, since the original cord overheated. Reattached all wires using the 6 new silver screws. Start with the middle terminal by attaching the appliance wires and the ground bracket. The ground must be attached to the bracket and the bracket bridges between the terminal block and the range body. Reattached shield cover. Plugged in appliance. Note: it doesn't matter which outside wire attaches to the outside terminals (both are hot), but the middle wire (neutral) must attach to the middle terminal. However, the ring terminal should be flush on the terminal block so you don't bend the ring.
  • Brian from DOVER, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove was not getting enough power.
My stove didn't seem to be getting enough power for the oven to heat up and the burners to get hot enough. When I checked the connection of the electric cord I found that one of the 3 terminals that the plug connects to was broken off. When the new part came I removed the old part by first disconnecting the 3 wires [black,white(ground),red] and then using a small but long 1/4 socket (that I found at Lowes)I removed the 2 screws that held the old part to the stove and the green screw under it holding the flat copper piece that also connects under the white ground wire of the part. I mounted the new piece on with the 2 1/4 screws. The new part comes with a piece of copper that is for grounding the part to the stove. When I compared it to the old part it was a little different. I first screwed the copper piece onto the stove (under the part) with the green screw then I screwed the white wire over the copper piece to the center terminal(you have to make the hole of the copper piece line up to the screw hole). I connected the other 2 wires and then connected the electric cord to the new terminal block and then put the back cover back on the stove and plugged it in. The clock came on I turned on the four burners they all got hot and red. I turned on the oven the element on the bottom got red I then turned on the broiler the top element got red. My stove is fixed.
  • Nathan from Wells, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.8
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS953027
Manufacturer Part Number: WB17T10011
Brand
Model Number
Description
General Electric
13421-1
Range
General Electric
13440-1
Range
General Electric
13441-1
Range
General Electric
13461-1
Range
General Electric
13461-2
Range
General Electric
13461-3
Range
General Electric
13540-1
Range
General Electric
13541-1
Range
General Electric
137480
Range
General Electric
137481
Range
General Electric
14325-1
Range
General Electric
14420-1
Range
General Electric
14421-1
Range
General Electric
14440-1
Range
General Electric
14441-1
Range
General Electric
14448-1
Range
General Electric
14460-1
Range
General Electric
14460-2
Range
General Electric
14460-3
Range
General Electric
14461-1
Range
General Electric
14461-2
Range
General Electric
14461-3
Range
General Electric
14520-1
Range
General Electric
14521-1
Range
General Electric
14540-1
Range
General Electric
14541-1
Range
General Electric
14548-1
Range
General Electric
14560-1
Range
General Electric
14560-2
Range
General Electric
14560-3
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service