Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pete Kinser
August 5, 2018
I need help in getting the torsion spring on the mulch guard in the right place. I have the correct torsion spring but i have no instructions on how to install it.Thanks
For model number 229630x8a Scotts or Murray
Hi Pete,
Thank you for your question. Here is some information that you may find helpful in installing the torsion spring, "Removed all of the parts from the existing upper handle, removed the broken knobs from the bolts and remove the old handle. Installed the new upper handle with the new knobs and bolts. To replace the spring start the pivot pin in the mulch cover, and place the spring in the mulch cover, Then start the pin thru the bracket on the mower deck. Keep pressure on the spring and hook the end of it to the indent on the mulch cover, then push the pin thru the other end of the bracket, and place the push caps on the ends of the pin." I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
_WW_2.gif "Part Location Diagram of 166X38MA Murray Spring-Torsion")
_WW_2.gif "Part Location Diagram of 166X38MA Murray Spring-Torsion")
