13037130 Snapper Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This genuine replacement part is supplied directly from original equipment manufacturer. This blade is designed for use with lawn mowers. It is a 3 in 1 blade which can be used to mow, mulch or discharge grass. This blade is made out of metal and it is sold individually. To replace it you would need a wrench to remove the blade bolt.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This bolt is a genuine OEM replacement part used in a variety of lawn and garden equipment. It is 2 inches long with a head diameter of 5/16 inches, and a thread pitch of 16 threads per inch. The bolt is used to secure the upper and lower handles on your equipment. If the bolt is stripped or damaged, your handles will become loose and fal...Read morel out of alignment. You may also notice increased shaking when using your equipment. Replace the bolt promptly as the handles can eventually collapse. Each bolt sold individually.

This is an original replacement part sourced directly from the manufacturer. The bag frame is commonly found in lawn mowers from Murray, Briggs & Stratton, and Snapper. This part is made of metal, and is used to hold the grass bag in shape to catch the grass clippings most efficiently. No tools are required when replacing this item. S...Read moreimply remove the old part and insert the new one in its place. This item is sold as an individual replacement part.

This is an authentic OEM part. The hubcap (8 & 9 wheel spoked) is constructed of durable plastic for many lawn mowers. Fitted onto the mower wheels, the rust resistant hubcap providing protection. The hubcap is sold individually, and a screwdriver is needed for the removal of the old cap. The new hubcap will snap into place.

Bearing ball axle

It is an authentic OEM item that is designed for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. This part provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. It is a standard hardware which may ...Read morehave multiple applications. Make sure to check the appropriate diagrams for your specific model for the exact location and the correct application of this cone washer. Note, it is made of durable metal and is sold individually.

Keep in mind this part is made of metal and is sold individually. The washer goes next to the extension spring. It may require a wrench during installation. Over time this part may break and will need to be replaced. This authentic item is supplied directly from the original equipment manufacturer for use with lawn tractors and lawn mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity.

Nut,25-20 hex flg ctr