13037221 Snapper Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This genuine replacement part is supplied directly from original equipment manufacturer. This blade is designed for use with lawn mowers. It is a 3 in 1 blade which can be used to mow, mulch or discharge grass. This blade is made out of metal and it is sold individually. To replace it you would need a wrench to remove the blade bolt.

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This bolt is a genuine OEM replacement part used in a variety of lawn and garden equipment. It is 2 inches long with a head diameter of 5/16 inches, and a thread pitch of 16 threads per inch. The bolt is used to secure the upper and lower handles on your equipment. If the bolt is stripped or damaged, your handles will become loose and fal...Read morel out of alignment. You may also notice increased shaking when using your equipment. Replace the bolt promptly as the handles can eventually collapse. Each bolt sold individually.

This is an original replacement part sourced directly from the manufacturer. The bag frame is commonly found in lawn mowers from Murray, Briggs & Stratton, and Snapper. This part is made of metal, and is used to hold the grass bag in shape to catch the grass clippings most efficiently. No tools are required when replacing this item. S...Read moreimply remove the old part and insert the new one in its place. This item is sold as an individual replacement part.

This is a genuine manufacturer-sourced part which is made for Murray and Snapper walk-behind lawn mowers. It is an identical replacement for a missing or a damaged drive wheel assembly that supports the equipment allowing it to move back and forth. Refer to the appropriate diagrams of your model for the correct replacement procedure. One ...Read moredurable drive wheel with a bearing is included. Note, the hardware to secure it is sold separately. A wrench will be needed to perform this repair.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is an authentic OEM part. The hubcap (8 & 9 wheel spoked) is constructed of durable plastic for many lawn mowers. Fitted onto the mower wheels, the rust resistant hubcap providing protection. The hubcap is sold individually, and a screwdriver is needed for the removal of the old cap. The new hubcap will snap into place.

This authentic replacement part is supplied directly from the original equipment manufacturer for use on Murray and Snapper walk-behind lawn mowers. The cable stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. Keep in mind this high-quality rub...Read moreber insulated component is sold individually. Refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure.

This is an original replacement part manufactured for use with self-propelled walk-behind lawnmowers. The pinion gears fit onto the transmission axle and are used to drive the geared or drive wheels. This gear is sold individually, please note two are required.