Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
SHAWN M - August 10, 2020
Verified Purchase
Simple repair
The part came quickly and was simple to swap out.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Side by Side Freezer/Refrigerator - Refrigerator not cooling
While waiting for parts I removed the control and side panels, placed duct tape partly over the hole to the freezer to allow fridge cooling and left the panels lay inside plugged up while I monitored the fridge temp. This worked until the parts arrived.
1. Remove 3 hex screws holding (underneath) the front control panel
... Read more to the top of the fridge. 2. Remove 2 screws holding the left side assembly. The control panel and the side assembly come down as 1 L shaped piece. 3. Unplug the large control cable and the small cable then remove the entire assembly. Note the position of the freezer sensor extending into the freezer. Separate the control panel from the side assembly to access the cable bundle. 4. Remove and replace the Damper Control Assembly. Note: You can remove the complete old styrofoam (glued in place) or cut the tape holding a 2 part styrofoam section that holds the damper in place and only replace the upper part. Be sure to tape the 2 styrofoam parts back together. Make sure the freezer sensor is placed properly on the Damper assy. 5. Remove and replace the old thermistor assembly, secure the wiring bundle and reattach the control panel to the side panel. 6. Place the entire assembly back inside, plug up the cables. 7. While supporting both panels insert the freezer sensor in the proper position and replace the 3 screws securing the control panel then the 2 screws securing the side panel. Check that the side panel is flush against the side after installation. 8 Wait about 12 hours for the temperature to stabilize.
Ask our experts a question about this part and we'll get back to you as soon as possible!
32 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 26, 2020
Fridge side is warm and the control panel beeps and flashes a h and 1 on the fridge side freezer seems fine.
For model number FFHS2611LWKA
Hello Robert,
Thank you for your question. The H1 error code means that the temperature is too warm for either the fridge or freezer side, and we would suggest resetting the fridge off by unplugging and and re plugging it back in, and if the error still appears, the control board under part PS10060580 for your model would need to be replaced. We hope this helps.
My refrigerator gives the code H1. I read that the Thermistor may need to be changed but I don't know where it's located.
For model number FFHS2622MSJ
Hi Jacqueline,
Thank you for your question. The H1 error code is letting you know that the freezer sensor has shorted. You will need to test the thermistor with a multimeter to see if it has continuity. Before performing this test, please unplug the refrigerator from the electrical outlet. Before testing them, you will need to place the thermistor in ice water for 5 minutes in order to bring the temperature to 32 degrees F. The thermistor will produce different readings at different temperatures, and the suggested ranges below only apply to thermistors at a temperature of 32 degrees F. With the probes on the terminals and your multimeter set to Rx1, you should receive a reading of 16,600 ohms (+/- 5 percent). If you receive a reading outside this range, you will need a replacement thermistor. The part number listed under your model number for the thermistor is PS8760187. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
John
July 12, 2021
Location of thermistor sensor located.?
For model number ffss2314qpba
Hello John, Thank you for the question. The Thermistor is located inside the Temperature Control Panel. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
July 25, 2021
Fridge side is beeping and flashing h1 code. Cool but not cold. I unplugged to try to re-set, but problem continues. Maybe thermistor, but how do I confirm?
For model number FFHS2611PF6
Hello John, Thank you for the question. The H1 indicates a Temperature that is to warm. You will need to test the Thermistor with a Multi Meter for a resistance reading of 27k ohms at 38 degrees. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
February 17, 2018
Refrigerator side freeze everything. No matter what setting it is on
For model number Ffhs2311lbpa
Hello Bruce, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: damper assembly, and thermistor. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
SANDEE
March 7, 2018
Refrigerator side is not cooling. Digital numbers at the top got to “h” or “1” and we have to reset to “9” for refrigerator side. Freezer side stays at 9 and works fine.
For model number FFHS2611LBNA
Hi Sandee,
Thank you for your question. If the refrigerator section is too warm, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the defrost thermostat, the door gasket, the run capacitor, the defrost heater, the evaporator fan motor and blade, the sensor and the filter-drier. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
March 26, 2018
The refrigerator side control for the temperature keeps beeping and flashing an h
For model number FFHS2322MBKA
Hi Jennifer,
Thank you for your question. The H means that your appliance thinks that either your fridge or your freezer temperature setting is set too warm. If you have not changed the temperature at all recently, then you may need to check your thermostats inside of your appliance. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jason
May 9, 2019
Fridge side not getting cold enough, small amount of ice on freezer condenser,i have to open damper with my hand to let air in icebox side,freezer is really cold?
For model number Ffhs2311lbla
Hello Jason, thank you for inquiring. For this symptom you will want to replace either the Defrost Thermostat Kit part PS469522, the Defrost Heater part PS2581596, or the Run Capacitor part PS3495561. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph Mascia
September 6, 2021
Getting error message sy ef.
For model number FGHN2844LFE
Hello Joseph, thank you for your question. Error Code SY EF is the System Evaporator Fault. This usually means there is NOT enough air flow over the sensor, this can mean a faulty sensor, part number PS1765215, or a faulty evaporator fan motor, part number PS1526073. We hope this helps.
H1 code showing on the freezer and fridge side, what could be the problem
For model number FFHS2622MWG
Hello Ryan, Thank you for the question. The H1 Error code indicates that the appliance has detected high temperature. We suggest you try setting the freezer temperature to 0 degrees or a lower and the refrigerator to 37 degrees. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
