This dishrack is for dishwashers.
Dishrack holds the dishes in place during the dishwashing cycle.
Follow the instructions in the manual when installing this part.
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Upper washer rack rusted out.
The repair is simple and straightforward. I rated as a bit difficult since the rack mounts on the new were located in the wrong place.
Releasing the rack from the slide rails requires either a Phillips screwdriver or a ratchet and socket.
The issue to check for, which I missed, is if the rail mounts on the new r
... Read moreack are in the same position as on the old rack. Mine were not and I did not discover until the new rack was fully installed. Once the unit was back out, 7 SS screws need to be removed on each side to move the mounts to the correct position.
Read less
Bryan from BROWNSVILLE, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
May 8, 2019
I just received my new upper rack. Its a different rack from old one. Does the old tracks fit on this new upper rack?
For model number GDWT368V55
Hello David, thank you for contacting us. Replacement parts are sometimes updated by the manufacturer and may appear different than the originals, but will function the same. The original rails should be fine with the updated rack.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
October 28, 2021
Upper rack sticking. Has a roller bearing type slide. Removed front end cap but tray does NOT remove. How do I fix this?
For model number GDWF160V55SS
Hello Paul, Thank you for the question. The most common issue is a damaged Roller and Axle. If they have been inspected and are good, you will need to replace the Inner Rail. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
I need a video on how to replace the upper rack for this GE dishwasher. I think the upper rack part is wd28x10402
For model number GDWT358V55ES
Hello Martin, thank you for your question. Unfortunately, we do not have an installation video for the RACK UPPER ROLL KIT part number WD28X10413 for your appliance. The repair is not difficult though, and is easily completed by removing the end cap that snaps into the end of the slide rail on the inside of the dishwasher. Once that end cap is removed on either side, the rack simply slides out. The new one can be installed into the slide rails and the end caps are put back into the ends of the rails. I hope this helps!
Was this helpful?
Thank you for voting!
Catherine
May 4, 2018
Does kit come with upper basket and both rails
For model number GHDT168V55SS
Hi Catherine, Thank you for the question. The rails are sold separately. Hope this helps!
Was this helpful?
Thank you for voting!
Betsy
July 12, 2023
Is this just the upper rack part that you put the glasses and dishes on? Thats all I need because of rust issues.
For model number CDWT980V05SS
Hi Betsy, thank you for contacting us. The part you mentioned, part number PS8756503, is just the upper dish rack. It holds the dishes in place during the dishwashing cycle. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
