Average Repair Rating: 3.7 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Was not heating.
Changed the diode and viola!
JASON from MIDLOTHIAN, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave appears to operate but does not heat
I used this excellent guide to diagnose the problem: h You need a safety Torx bit to open the case, and carefully follow instructions to discharge the high voltage capacitor! Following the youtube instructions and a commenter's advice to use a 9V battery in series with the multimeter instead of the cumbersome 12 V car battery method, I fo
... Read moreund that the diode was defective (low resistance). This was easy to replace, but the microwave still did not heat. The diagnostics video cautioned that the tests used do not identify all bad magnetrons. The antenna on mine was discolored, so ordered a replacement, and this fixed the problem.
Read less
David from BETHESDA, MD
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave started to make loud vibrating sound
Went on you tube step by step instructions.Tested to find Diode defective. replaced same
Thomas from PINEHURST, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
May 7, 2019
Can i use a wb27x10930 with this model or do i have to get wb27x21012
For model number ZEB1226
Hi Joe, thank you for your question. You have to use the part that the manufacturer directly listed underneath of your model number. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.