This valve is designed for use with washers. Inlet valves on washers are what control the flow of water into your appliance, this valve is used to control the flow of hot water into your washer. If your washer is leaking, if it is only washing in cold water, if it is not filling at all, or if it is filling slowly you will need to check the inlet valves. If you find this inlet valve is clogged, restricted, or damaged in any way you will need to replace it. Before starting repair work you need to shut off the water supply, this helps prevent any flooding or mess while replacing the valve in your washer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Bosch.
Part# 00422245 replaces these:
AP3737683, 422245
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clinton
August 21, 2019
Does this part also fit wfmc5440uc/15 as it is not listed in your specs, just the /13.
For model number WFMC5440UC/15
Hello Clinton, thank you for inquiring. After researching your model, I was able to confirm that this Hot Water Inlet Valve part number PS8713230 is the correct replacement for it. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lyle
January 22, 2019
My washer filled with water while not even in use, pushed door open and we had water flood. Is a fill valve replacement the solution?
For model number wfmc3301uc/03
Hello Lyle, Thank you for the question. Yes, the most commonly replaced part is the valve. The valve can become stuck open and allow water to enter the tub even when not in use. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No hot water going into the washer when hot washes selected
After doing research, I ordered a new hot water inlet valve. After that arrived, I: 1. Turned off the water going into the washer and unplugged it. 2. Pulled the washer away from the wall and unscrewed the cold and hot water intakes to check the filters and make sure they were both clear. 3. Unscrewed the two screws (they were hex heads, so they needed a socket wrench) in the back of the washer (right and left sides) that were holding the top on. Once removed, I removed the top cover to the washer by pushing it back slightly, then popping it off. 4. Used the pliers to loosen the metal clamp attaching a rubber hose to the old hot water inlet valve - disconnected that hose by scooting the clamp back away from the valve and pulling the hose off. 5. Removed the old inlet valve (takes some finagling) and placed the new valve in an identical position. 6. Reattached the hose and clamp to the new inlet valve. 7. Reattached the hot and cold water lines to the washer. 8. Replaced the washer cover and two screws. 9. Turned the water back on and pushed the washer back into place and plugged it back in. 10. Tested a hot water cycle. Fixed!
SARAH from TIJERAS, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael M - September 23, 2021
Verified Purchase
Bosch Hot water valve leaking filling drum with clean water
easy safe directions and video, part exact fit,
NO MORE Leak Yea
★★★★★
★★★★★
Lynne B - December 2, 2020
Verified Purchase
Part worked out great
Son installed easily and machine works fine.
★★★★★
★★★★★
Matthew O - June 17, 2019
Verified Purchase
East repair unstick quick delivery
The part was new I hope and not reconditioned. It solved my problem and easy to change. Price was reaonable
★★★★★
★★★★★
STEVEN W - September 21, 2018
Verified Purchase
Easy repair
Part was in great condition and worked as expected. Fast delivery.
★★★★★
★★★★★
Harry M - July 15, 2018
Verified Purchase
Easy repair, works great, easy to find on website
Changed it today and the washer works great and is much quieter.
★★★★★
★★★★★
Dean S - May 29, 2018
Verified Purchase
Part was exactly like the original. Easy installation.
Part came in 2 days and in excellent shape. We were back in business in short order and saved us trips to the laundro-mat, not to mention how much money we saved avoiding a service call and installation. Thank you Parts select.
★★★★★
★★★★★
Dana M - February 6, 2018
Verified Purchase
Washing Machine
Repairman was going to charge $100 mileage plus parts & labor!!! I Googled how to fix & ordered the part from PartSelect (with the help of the diagram on your website!). I installed myself & TA DA!!! I have hot water!!! Thank you!!!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
