Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
September 12, 2019
My ice maker don't work. Changed water inlet valve
For model number FRS26LH5DS9
Hi Joe, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
March 4, 2020
Makes ice but does not dispense ice
For model number frs26lf7ds7
Hello and thank you for writing.
It certainly sounds like it could be a faulty ice container and auger assembly PS1991430 you should check the part(s) for signs of damage and replace the part(s) as needed. It is more likely to be faulty than the solenoid, but the solenoid is a possibility as well. We hope this helps. Please contact us anytime if you require further assistance.
Ice maker seems to be melting, then refreezing in large chunks - then it won't dispense. Not sure what it could be - cleaned entire frig & freezer, cleaned door gaskets and put vaseline on them. Still happening. Also, the handle to turn off the icemaker will try to go up, but just sticks and clicks and clicks constantly - very loud and annoying. Please help
For model number FFHS2611PFCA
Hello Deb,
Thank you for your question. Our sources say that you would just need to replace the ice maker assembly under part PS12364147 for your model. Hope this helps!
My ice solenoid came with the number 0630 label. The replacement has 0648 label. I am i ordering the right part. My ice maker only dispense crush ice and not cubes.
For model number PLHS67EGSB1
Hello Carl, Thank you for your inquiry. This is the part number for the solenoid only that we show as compatible to your model. You can also get a complete assembly part# 241675704 which contains the solenoid, spring, e-ring and white actuator. Good Luck with your repair!
Was this helpful?
Thank you for voting!
Shelley Hairston
April 6, 2018
Does the Green ground wire that is connected to solenoid and auger motor also attach to motor housing bracket? A repair man disassembled and never returned and i'm attempting to reassemble ...please help
For model number FFHS2322MB4
Hi Shelley,
Thank you for your question. There is a video on our website that you can reference on how to install the solenoid. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS2003478. If this does not help, you will have to contact the repairman to come back and finish the job. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Marie
August 29, 2019
Ice make will not make ice. I have water.
For model number Ffhs2622msa
Hello Marie, thank you for writing. This could be due to a faulty Water Inlet Valve, part number PS7784018 for your model. You may also want to consider replacing the Ice Maker itself, part number PS12364147. Good luck with your repair!
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Frigidaire Refrigerator Ice Solenoid
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 2 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The ice dispenser would only dispense crushed ice, Fridge door cluncked when opening and closing
For the ice dispenser, I read a blog that pointed me right to the solenoid that controls the linkage for the crushed /cubed ice.I first unplugged the fridge. Then removed the ice maker basket. Removed 2 ea screws from each side of the supports of the lower brackets. Then lifted the tray assy off the mounting bracket, moving the front of the bracket down you can then unhook the power/control connector. The tray then comes right out. Once out you remove two screws that hold a plastic plate on. With this removed you can see the solenoid that actuates the linkage for the ice cube and crushed ice. You then remove 2 ea machine screws that hold the solenoid in. Remove grd. wire. and pull power wires off tabs. You can then remove the solenoid by sliding it out of the plastic retainer. With it out you install the new plunger and reassemble in the reverse order. 15 mins tops.
The main Refidgerator door, made a cluncking sound. Lube didn't help. I removed the door by removing the top screw from the plastic cover, then slide it forward, then remove the two screws that hold the hinge on and then lifting the door off, once off the lower nylon hinge bearing comes right out of the door, the plate is removed with a screw driver. Installed in reverse order and cluncking was gone. 10 mins
ice maker would not dispense cubes, stuck on crushed ice
turn off ice maker, unplug electoral connection, under bottom of ice maker, remove two screws (hex) under bottom of ice maker, lift up on it to unhook it, take it out. (dump out all ice ). remove back plate on back of ice maker (two screws), the solenoid is held in place with two brass screws, remove them, then remove ground wire from solenoid and two wires, that connect to it,(make a note of how wires go back !). put it all back together and your good to go. . i dont think its really the solenoid that goes out, its the housing that encases it, and you have to buy another solenoid thats encased. good luck
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis T - December 2, 2020
Verified Purchase
Ice Maker solenoid. Great part.
The exact part delivered exactly when I needed it. I loved that they attached a video on how to replace it as well. Partselect is my “go to” for any of my home appliances. They are always there no matter what the question is. It’s rare to find a company like them in today’s market. Thank you Partselect.com. You have earned my loyalty!
★★★★★
★★★★★
Laurie B - July 17, 2019
Verified Purchase
fairly easy repair, shipping too long
Paid extra for "standard shipping" which says it has average shipping time of 1.8 business days. Mine took 6 business days, which, including weekends and July 4th holiday, was 9 days. Pretty disappointed about that. The repair itself was easy, the video helpful.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8691995
Manufacturer Part Number: 241675803
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
